Cup-shaped corundum grinding disc , type 49C , TYROLIT
| 100/71x40 x 20mm (8x10x56) / 46K9V |
On request
|
21,10 € with VAT |
| 125/92x45 x 32mm (7,5x12x80) / 80K9V |
In stock
(1x)
|
29,14 € with VAT |
| 150/114x50 x 32mm (10x12x100) / 80K9V |
On request
|
31,98 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- TYROLIT
- Warranty:
- 24 months
Product information
Diameter: according to the selected variant
Disc height: according to the selected variant
Opening: according to the selected variant
Width of the disc wall (from the front side): according to the selected variant
Width of the disc at the clamping point: according to the selected variant
Diameter of the disc bottom: according to the selected variant
Grain: according to the selected variant
Abrasive type: 49C - green silicon carbide, ceramic binder
Hardness: according to the selected variant
Structure: according to the chosen variant
Speed: 32 m/s
* You can find the method of marking the discs in the attached table.
Recommended use: carbide + SIC, cast iron, non-ferrous metals
Possible use: steel up to 67HRC, stone, titanium alloys, stainless steel, plastic, fiberglass
Variants
Accessories
-
Cutter Master HDT30 / ON-220 tool sharpener
Cutter Master Grinder - Cutters, Drills, Countersinks, Drills, Reamers, Taps, Drills ... with Pneumatic Spindle Mounting - To Enhance High Tool Sharpness, Type ON-220 Maximum Cut Tool Diameter: 50 mm Cutter Length: 245 mm 5C: 3 - 25 mm Transverse Shift - Y-Axis: 75 mm Longitudinal Shift - X-Axis: 150 mm Tilt Range Holder: 360 ° Angle adjustment angle: -5 ° to 30 ° Wheel travel: 250 mm Nonius cutting: 0,02 mm / divide, total 100 pieces Spindle has a flange - suitable for 2pcs. 3br. 4br. 6 and 12 tools. The grinder has both right and left rotation. Speed: 2800 rpm. Disc: 125x50x31,75mm Dimensions: 700x700x600mm Power supply: 230V / 50Hz Required pressure: 0,63 MPa Motor protection: IP54 Bulb: 50W / 24V / GY 6,35 OSRAM Scope of delivery: Supplied without collet , 5C collet can be purchased with us. Application: Suitable for sharpening blades / grinding cylindrical parts of tools. Also suitable for forehead grinding. Also suitable for grinding spiral drill bit drill bit drill (without cutter).
In stock2.513,16 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!