ZPS

Quality Czech step drill for metal Step drill for thread holes and countersunk screw head 90 ° Helix angle: 25 ° to 30 ° Tip angle: 118 ° and 90 ° Form: A Material: HSS Standard: DIN8374 / PN221254 When drilling, lower cutting conditions than the standards for conventional drills must be selected. Usage: Step drills with four chamfers are recommended for drilling holes for screws and at the same time countersinking for cylindrical screw heads in components made of non-alloy and alloy steel and cast steel up to 800 N / mm2, gray, malleable and ductile cast iron, aluminum alloys, etc.

Quality Czech step drill for metal Step drill for holes for shank and Allen screw head 180 ° Helix angle: 25 ° to 30 ° Tip angle: 118 ° and 180 ° Form: A Material: HSS Standard: DIN8376 When drilling, lower cutting conditions than the standards for conventional drills must be selected. Usage: Step drills with four chamfers are recommended for drilling holes for screws and at the same time countersinking for cylindrical screw heads in components made of non-alloy and alloy steel and cast steel up to 800 N / mm2, gray, malleable and ductile cast iron, aluminum alloys, etc.

Single-edge / single-tooth end mill, 1 tooth through the center with a cylindrical shank Diameter D (js16): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions: see the attached catalog sheet Number of blades: 1 blade. ( 1 pc. ) Helix angle: 30° Head angle: 20° Material: HSSCo5 (contains 5% cobalt) Standard: DIN 844, DIN1835A Usage: For machining in 3 axes For aluminum and aluminum alloys up to 500 Mpa Non-ferrous metals and plastic Order no. code - series: 100405

Miller for prismatic / dovetail guides with cylindrical shank Cutter angle: 45° Cutter diameter (maximum): 16mm Other dimensions - see the attached catalog sheet Standard: ČSN 222260 / CSN 22 2260, DIN 1833 A, C, ISO 3859 Material: HSSCo5 - 5% cobalt Cat. No. - series: 330205 and 330215

Angle cutter with cylindrical shank Cutter angle: according to the selected variant Cutter diameter (maximum): according to the selected variant Other dimensions - see the attached catalog sheet Standard: ČSN 222262 / CSN 22 2262, DIN 1833 B, D, ISO 3859 Material: HSSCo5 - 5% cobalt Cat. No. - series: 350005 and 350015

Double-edged grooving cutter with asymmetrical edges with cylindrical shank Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 2 pcs. ( 2 pcs. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 25° Head angle: 12° Standard: DIN 1835 A / DIN1835B, DIN 327, ISO 1641, ČSN 222192.1 (CSN 22 2192 / 22 2192.1) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 220408 and 220418

Double-edged grooving cutter with asymmetrical edges with cylindrical shank Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 2 pcs. ( 2 pcs. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 25° Head angle: 12° Standard: DIN 1835 A / DIN 1835 B , DIN 327 , ISO 1641 , ČSN 222192.1 ( CSN 22 2192 / 22 2192.1) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 221408 and 221418

End mill, double-edged, double-toothed Diameter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Helix angle: 25° Head angle: 10° Other dimensions - see the attached catalog sheet Material: HSSCo8 Standard: DIN 1889 Cat. number - series: 510418 and 511418

End mill, double-edged, double-toothed Diameter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Helix angle 25° Face angle 10° Other dimensions - see the attached catalog sheet Material: HSSE-PM Coating: TiAlN (Tital Aluminum Nitride) Standard: DIN 1889 Cat. number 510417.040

Double-edged grooving cutter with asymmetric edges with a cylindrical shank with a weldon groove for clamping. Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 2 pcs. ( 2 pcs. ) Material: HSSE-PM, AlTiN coating Helix angle: 25° Head angle: 12° Standard: DIN 1835 B, DIN 327, ISO 1641, ČSN 222192.1 (CSN 22 2192 / 22 2192.1) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Material HSSE-PM : High performance steel produced using powder metallurgy. It has a homogeneous structure, which manifests itself in higher dimensional stability and durability of the tool edge. Suitable for machining high-strength and difficult-to-machine materials such as titanium and its alloys. We supply milling cutters made of this steel with an AlTiN coating as standard. Order no. code - series: 220417

Double-edged grooving cutter with asymmetrical edges with cylindrical shank Diameter D (e8) : 2 mm Blade length l: 4mm Total length: 48mm Other dimensions - see product description for individual variants Number of blades: 2 pcs. ( 2 pcs. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 10° Head angle: 4° Standard: PN 222190.1, DIN 327 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 210508

Double-edged grooving cutter with asymmetrical edges with cylindrical shank Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see product description for individual variants Number of blades: 2 pcs. ( 2 pcs. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 10° Head angle: 4° Standard: PN 222190.1, DIN 327 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 211508