Zbrojovka

Quality Czech step drill for metal Material: HSS Shank: cylindrical When drilling, lower cutting conditions than the standards for conventional drills must be selected.

Quality Czech step drill for metal Material: HSS Stem: morse cone When drilling, lower cutting conditions than the standards for conventional drills must be selected.

Drill with conical shank Diameter: according to the selected variant Total length / helix length: according to the selected variant Clamping stem: morse taper Material: HSS Other dimensions - see product description for individual variants Standard: ČSN 221150 Czech production

Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: ČSN241440 / DIN2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Goods from excess stock, unused

Machine drill with taper shank, with four cutting edges Average: according to the selected variant Tolerance: Nominal dimension in tolerance h8 for hole with allowance for further more precise machining Short cutting edge design. Other dimensions - see product description for individual variants Material: HSS - high-performance high-speed steel Standard: ČSN 221411 / CSN 22 1411 / DIN222 / DIN 222 / ISO 3314 Usage: Machining of pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy.

Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Standard: ČSN 241411 / CSN 24 1411 If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. The goods come from excess stock, unused

Milling mandrel for clamping cylindrical socket cutters, securing with two keys / for milling heads with cylindrical drilling Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Standard: ČSN 241421 / CSN 24 1421 If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Goods from excess stock, unused

Socket drill with four cutting edges Average: according to the selected variant Other dimensions - see enclosed catalog sheet Material: HSS - high-performance high-speed steel Tolerance: Nominal dimension in tolerance h8 for hole with allowance for further more precise machining. Method of drill production: F (milling) Standard: ČSN 221414 or DIN 222N (ISO 3314) Holders ČSN 241210 (DIN 217) Usage: Machining of pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy. The drills are made in the Czech Republic, unused, they come from excess stock. Only a limited selection.

Long milling mandrel for clamping socket cylindrical / circular cutters and saws. Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part: according to the selected variant The other end of the mandrel is stored in the bearing of the extendable arm. Standard: ČSN 241431 / CSN 24 1431 Goods from excess stock, unused. Pins may have slight surface corrosion caused by improper storage.

Long milling mandrel with Morse taper for clamping cylindrical / disc cutters and saws. Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part: according to the selected variant The other end of the mandrel is stored in the bearing of the extendable arm. Standard: ČSN 241433 / CSN 24 1433 Goods from excess stock, unused. Pins may have slight surface corrosion caused by improper storage.

Hand reamer for holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Material: HSS Standard: ČSN 221420 / CSN 22 1420 / DIN 206 Form B (ISO 236) Application: Reaming of through holes in repairs and piece production for all non-ferrous and ferrous metals, their alloys and plastics. Reamers are Czech-made, unused, come from excess stock. Only a limited selection. If you haven't found the reamer you're looking for, type or call, we'll check.

Countersink with guide pin for countersunk screws (for countersunk screws) Diameter of countersink x Diameter of guide pin: according to selected variant Clamping shank: cylindrical or with Morse taper - according to the selected variant Material: HSS Standard: ČSN 22 1620 / CSN 22 1620 Use for countersinking holes for 90 ° countersunk screws in common materials.