Your taps
-
Forming tap M - HSSE-PM TiN ISO2(6HX) without lubrication groove, FANAR
Forming tap without lubrication groove Form: C (2 ramps) Fitting: ISO 2, 6HX Material: HSSE-PM (High speed steel + 5% cobalt Co5, sintering) Coating: TiN Standard: DIN 371, DIN 2174, ČSN 223052 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content
from 15,81 € with VAT -
Forming tap M - HSSE-PM TiN ISO2(6HX) SR, DIN2174, ČSN 223052, FANAR
Forming tap with lubrication groove Form: C (2 ramps) Fitting: ISO 2, 6HX Material: HSSE-PM (High speed steel + 5% cobalt Co5, sintering) Coating: TiN Standard: DIN 371, DIN 2174, ČSN 22 3052 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content
from 13,19 € with VAT -
Forming tap M - HSSE-PM TiN ISO3(6GX) SR, DIN2174, ČSN 223052, FANAR
Forming tap with lubrication groove Form: C (2 ramps) Fitting: ISO 3, 6GX (plus tolerance - suitable for use eg before galvanizing) Material: HSSE-PM (High speed steel + 5% cobalt Co5, sintering) Coating: TiN Standard: DIN 371, DIN 2174, ČSN 22 3052 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content
from 17,29 € with VAT -
Forming tap M - HSSE TiN ISO2(6HX) SR, DIN2174, ČSN 223052, FANAR
Forming tap with lubrication groove - final sale (new series see 923005 made of sintered HSSE-PM steel) Form: C (2 ramps) Fitting: ISO 2, 6HX Material: HSSE (High speed steel) Coating: TiN Standard: DIN 374, DIN 2174, ČSN 22 3052 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content
from 29,16 € with VAT -
Forming tap M - HSSE-PM TiCN ISO2 C(6HX) SR, FANAR
Recommended ✓WGN forming tap with lubrication groove Form: C (2 ramps) Fitting: ISO 2, 6HX Material: HSSE - PM (High speed steel + 5% cobalt Co5) Coating: TiCN Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 4.2: Aluminum alloys with silicon admixture from 1% to 7% 4.5: Copper with zinc with long chips
from 16,07 € with VAT -
Forming tap M - HSSE-PM TiCN ISO2 E 6HX SR, FANAR
Recommended ✓WGN forming tap with short lead lubrication groove Form: E (1.5-2 ramps) Fitting: ISO 2, 6HX Material: HSSE - PM (High speed steel + 5% cobalt Co5) Coating: TiCN Standard: DIN371, DIN376 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 4.2: Aluminum alloys with silicon admixture from 1% to 7% 4.5: Zinc-doped long chipped copper
from 16,07 € with VAT -
Forming tap M - HSSE-PM TiCN ISO2 E 6HX SR with central cooling, FANAR
Recommended ✓WGN forming tap with lubrication groove with short lead and internal cooling (1x drilling) Form: E (1.5-2 ramps) Fitting: ISO 2, 6HX Material: HSSE - PM (High speed steel + 5% cobalt Co5) Coating: TiCN Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 4.2: Aluminum alloys with silicon admixture from 1% to 7% 4.5: Zinc-doped long chipped copper
from 27,62 € with VAT -
Forming tap M - HSSE-PM TiCN ISO2 E 6HX SR with cooling, FANAR
Recommended ✓WGN forming tap with lubrication groove with short lead and internal (2x drilling) cooling Form: E (1.5-2 ramps) Fitting: ISO 2, 6HX Material: HSSE - PM (High speed steel + 5% cobalt Co5) Coating: TiCN Standard: DIN371, DIN376 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 4.2: Aluminum alloys with silicon admixture from 1% to 7% 4.5: Zinc-doped long chipped copper
from 40,33 € with VAT
