Workshop equipment

Energy-saving LED bulb for a machine lamp Power: 4W (LED bulbs are about thermal power, not luminosity!) Socket: GU5.3 (pin spacing is 5.3mm) Diameter: 50mm Lifespan: 7 years (8 hours / day) Dimmable: no Angle of light: 30 ° Color temperature (color temperature - white light spectrum): 6500K (see attached picture) Power supply: AC 12V (DC 12V) Certification: CE, RoHS Suitable for lamps: VLED-20L, VLED-30M, VLED-30L

Energy saving LED bulb for machine lamp Power: 13W( LED bulbs are about heat output, not luminosity!) Socket: E26( = 26mm) Diameter: 95mm Dimmable: no Light angle: 30 ° C Color temperature(Color temperature - white light spectrum ): 5700K - 6500K(see attached image) Power supply: AC 100 - 240 V Certification: CE, RoHS Suitable for lamps: VLED-400L, VLED-400M, VLED-500S, VLED-500L, VLED-500M

Úsporná lampa s LED žárovkou s kloubem , vhodná do provozuPrachuvzdorná lampa s ohebným 300° kloubemPodstavec je bez magnetu, možno dokoupit - viz související produktyTyp LED čipu : Philips LED MR16 Patice žárovky : GU5.3 (rozteč kolíků je 5,3mm)Rameno - délka : 500mmLED žárovka 6W (12V) , 285 lumenů , bílé světloNapájení : 230VKabel o délce : 1,8 mLampa s LED žárovkou neprodukuje nadměrné teplo - narozdíl od halogenového typuVhodná pro CNC, gravírovací a vyvrtávací stroje, soustruh, do dílnyObj. č. : 1025-150

Energy saving lamp with LED bulb with joint, suitable for operation Dustproof lamp with flexible 300 ° joint The base is without a magnet, can be purchased - see related products LED chip type: Philips LED MR16 Bulb socket: GU5.3 (pin spacing is 5.3mm) Arm - length: 500mm LED bulb 6W (24V), 285 lumens, white light Power supply: 230V Cable length: 1.8 m A lamp with an LED bulb does not produce excessive heat - unlike the halogen type Suitable for CNC, engraving and boring machines, lathe, workshop Ord. No.:1025-150-24V

Lamp with halogen lamp and flexible arm, suitable for operation Halogen bulb included Power supply: 24V (without plug and socket plug, cable ends with refined wires => directly connected to 24V terminal blocks!) Protection: IP20 Flexible arm Cable length 1.8m Suitable for wiring directly to the machine - to 24V terminals Lamp without magnet, attaches with four screws over the corners of the stand. Ref. No .: 1025-151 24V

Hand Picker Permanent Magnet Dimensions: 112x178 mm Ref. No. 2015-440

Hand collector clips Equipped with a permanent magnet To grasp the scrap metal, just pull the handle Impact resistant design When lifting objects with a diameter> 105mm lifts 4.4kg . When lifting smaller diameters

Magnetic distributor - sorter, separating magnet - magnetic rod Sheets are connected with magnetic rods rigidly. Dimensions: Length: 180mm Width: 170mm Height: 75mm Bar Lengths: 2x180mm, 1x135mm, 2x125mm, 2x90mm Diameter bars: 20mm

Magnetic distributor - sorter, separating magnet - magnetic rod Sheets are connected with magnetic rods rigidly. Dimensions: Length: 239mm Width: 220mm Height: 65mm Bar Lengths: Bar Diameter: 20mm

Not Applicable as a Hand Gripper with Adjustable Arm / Load magnet! magnet size: 120x70mm Ref. No. 2019-041A

Hand-held clamp with adjustable arm / rod Equipped with a permanent magnet To grab metal scrap, just pull the handle Use for office Â!â „c â„ c, production and household Cannot be used as a load magnet! Load capacity: 8kg Magnet size: 120x70mm Ord. A „. : 2019-041A

Telescopic Metal Scrap Picker, Metal Waste, Magnetic Sheet Mobile Version with Tele Rod Simple, Safe, Practical Equipment Contains Permanent Magnet After pressing the trigger, the magnet will deactivate and the metal waste will drop off. Stick Length: 720-1035mm Overall Width: 384mm (Measured incl. Castors) Max Magnet Sleeve 8,9kg Ref. No. 2019-043