Woodworking

Abrasive cloth - ring CS 310 X Diameter and width of the ring: according to the selected variant Grain: according to the selected variant Main use: metals - universal Possible use: plastic Binder: synthetic resin Type of grain: corundum Type of sprinkle: thick Pad: X-cotton Spiral glued, reinforced back side. High aggressiveness when using the GK310 rubber body - see related products

Retractable holder, mandrel for clamping bimetallic crowns 20.1169 Clamping range: 32-305mm(idally 100-305mm) Clamping shank: hexagon 9.5mm(3/8 ") With this holder, you will not have a problem pulling the drilled material from the center of the crown. Drill diameter: 6.35mm Thread: UNF 5/8 "x 18 strokes per inch The holder includes an HSS drill.

Set of core drills / jigsaws / bi-metal drill bits 20.1501 for electricians Diameters: 22/29/35/44/51/64/68 mm Max. drilling depth: 38mm Set includes holders 20.1507 and 20.1521 Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine toothing - 4/6 "gearing Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals HSS Co8 bimetal jigsaw with fine toothing. Fine toothing is very well suited for It ensures a quieter operation and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.

Set of core drills / jigsaws / bi-metal drill bits 20.1502 for plumbers Diameters: 19/22/29/35/38/44/51/57/64 mm Max. drilling depth: 38mm Set includes holders 20.1507 and 20.1521 Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine toothing - 4/6 "gearing Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals HSS Co8 bimetal jigsaw with fine toothing. Fine toothing is very well suited for It ensures a quieter operation and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.

Holder, mandrel for clamping bimetallic crowns 20.1503 Clamping range: 32-210mm Clamping shank: hexagon 9.5mm Drill diameter: 6.35mm Thread: UNF 5/8 "x 18 strokes per inch The holder includes an HSS drill.

Set of core drills / jigsaws / bi-metal drill bits 20.1504 - universal Diameters: 16/19/22/29/35/44/52/57/67 mm Max. drilling depth: 38mm Set includes holders 20.1507 and 20.1521 Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine toothing - 4/6 "gearing Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals HSS Co8 bimetal jigsaw with fine toothing. Fine toothing is very well suited for It ensures a quieter operation and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.

Guide drill 20.1505 for Karnasch punching brackets 20.1503 - 20.1507 - 20.1510 - 20.1511 - 20.1521 - 20.1528 Diameter: 6,35mm Total drill length: 80mm - including spring

Holder, mandrel for clamping bimetallic crowns 20.1507 Clamping range: 14-30mm Clamping shank: hexagon 9.5mm Drill diameter: 6.35mm Thread: UNF 1/2 "x 20 strokes per inch The holder includes an HSS drill.

Holder, mandrel for clamping bimetallic crowns 20.1509 Clamping range: 14-30mm Clamping shank: dia. 6.35mm Drill diameter: 6.5mm Thread: UNF 1/2 "x 20 strokes per inch The holder includes an HSS drill.

Holder, mandrel for clamping bimetallic crowns 20.1510 Clamping range: 14-30mm Clamping shank: SDS Drill diameter: 6.35mm Thread: UNF 1/2 "x 20 strokes per inch The holder includes an HSS drill.

Holder, mandrel for clamping bimetallic crowns 20.1511 Clamping range: 32-210mm Clamping shank: SDS Drill diameter: 6.35mm Thread: UNF 5/8 "x 18 strokes per inch The holder includes an HSS drill.

Guide drill 20.1512 for punching holder Karnasch 20.1509 Diameter: 6,35mm Total length of drill: 105mm - including spring