With soldering TK slice

Drill with cylindrical shank and soldered carbide plate Usage : For drilling in a hand or column drill - suitable for drilling in hard steel, cast iron and stainless steel. This design is not as susceptible to vibrations as monolithic carbide drills, i.e. it is ideal if you need to drill screws, hard sheets, etc. in a hand drill - we recommend pre-drilling with a small diameter and making sure that the drill does not overheat - it could lead to de-soldering of the board. Standard: PN 221320 / PN221320 / PN 1320

Drill with cylindrical shank and brazed carbide insert Usage: For drilling in a hand or column drill - suitable for drilling in hard steels, cast iron and stainless steels. This design is not as prone to vibration as solid carbide drills, ie it is ideal if you need to drill screws, hard plates, etc. in a hand drill - we recommend pre-drilling with a small diameter and making sure that the drill does not overheat - the plate could be desoldered. Standard: PN 221320 / PN221320 / PN 1320

Set of 5 drills with cylindrical shank and brazed carbide insert Diameters: 4/5/6/8 / 10mm pr . 4 x 24x57mm dia. 5 x 36x72mm dia. 6 x 40x76mm dia. 8 x 51x97mm dia. 10 x 59x107mm Usage: For drilling in hand or column drills - suitable for drilling in hard steels, cast iron and stainless steels . This design is not as prone to vibration as monolithic carbide drills, ie it is ideal if you need to drill screws, hard sheets in the hand drill, etc. - we recommend drill a small diameter and make sure that the drill does not overheat - the insert could become detached. standards Standard: PN 221320 / PN221320 / PN 1320

Set of 5 drills with cylindrical shank and brazed carbide insert Diameters: 3/4/5/6/7/8 / 10mm pr. 3 x 19x51mm dia. 4 x 24x57mm dia. 5 x 36x72mm dia. 6 x 40x76mm dia. 7 x 47x87mm dia. 8 x 51x97mm dia. 10 x 59x107mm Usage: For drilling in hand or column drills - suitable for drilling in hard steels, cast iron and stainless steels . This design is not as prone to vibration as monolithic carbide drills, ie it is ideal if you need to drill screws, hard sheets in the hand drill, etc. - we recommend drill a small diameter and make sure that the drill does not overheat - the insert could become detached. standards Standard: PN 221320 / PN221320 / PN 1320