V-coil

Product count: 5
  • Workshop kit for thread repair M5-M12 WorkShop KIT, V-Coil

    Workshop kit for thread repair M5-M12 WorkShop KIT, V-Coil

    V-Coil M5-M12 thread repair workshop kit - only normal pitch / thread repair Kit includes: Threads: M5x0.8 , M6x1.0 , M8x1.25 , M10x1.5 , M12x1.75 Drills: 5.2mm , 6.3mm , 8.3mm , 10.4mm , 12.4mm Loaders, breakers and threaded inserts in length 1.0D / 1.5D and 2.0D (10pcs from each length) The lengths of the inserts are always a multiple of the diameter of the thread being repaired, i.e. if you are repairing an M6 thread and there are 1.5D inserts in the set, then the length of the insert is 1.5 times 6mm, i.e. 9mm. If you need a shorter or longer insert, we can offer separately in lengths 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length doesn't suit you, you can adjust the length - cut, grind, pinch - as possible, just be careful - the inserts are stainless steel, it won't be easy. Method of thread repair: 1. You drill out the damaged thread with the attached drill ( if it is included in the set) 2. You cut the thread with the attached (special) tapper (using other - set or machine tappers does not work) 3. With the help of the enclosed inserter, you introduce the insert to the desired depth (note, the inserts cannot be turned back!) 4. Use a punch ( if it is included in the set) or use pliers to break out the insertion part on the insert

    On request
    157,31 € with VAT
  • Workshop set for thread repair M5-M12, V-Coil

    Workshop set for thread repair M5-M12, V-Coil

    V-Coil M5-M12 Thread Repair Workshop Set - Only Common Creep. / Thread Repair Kit contains: Taps: M5x0,8, M6x1,0, M8x1,25, M10x1,5, M12x1,75 Drills: 5,2mm, 6 , 3mm, 8,3mm, 10,4mm, 12,4mm Inserts lengths are always a multiple of the diameter of the thread to be repaired, ie if you repair the M6 ??thread and the set is 1,5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

    In stock
    143,93 € with VAT
  • Workshop set for thread repair V-Coil M6-M14x1.25mm / PT

    Workshop set for thread repair V-Coil M6-M14x1.25mm / PT

    V-Coil Thread Repair Kit M6-M14x1,25 / Thread Repair Kit contains: Taps: M6x1,0, M8x1,25, M10x1,5, M12x1,75, special - stepped 14x1,25 Drills: 6,3mm, 8,3mm, 10,4mm, 12,4mm Loaders, Breakers and Threaded Insert Liner Lengths < / b> is always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

    On request
    197,17 € with VAT
  • Workshop set for repairing V-Coil BSF 1/4 - 1/2 threads

    Workshop set for repairing V-Coil BSF 1/4 - 1/2 threads

    Workshop Kit for V-Coil Thread Repair BSF 1/4 "- 1/2" - Fine Whitworth - Fine Gradient BSF Taps: 1 / 4x26, 5 / 16x22, 3 / 8x20 , 7 / 16x18, 1 / 2x16 Drills: 6,6mm, 8,3mm, 9,9mm, 11,5mm, 13mm < Inserts lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1,5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

    On request
    215,07 € with VAT