UN and UNS

Machine tap, straight groove with chip breaker, for American unified thread Thread type: UN - American unified thread (UNified thread) Here you will find special types of climbs - outside the regular range Size: according to the chosen variant Top thread angle: 60 ° Form: B Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ISO529 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes

Machine tap, straight groove with chip breaker, for American unified thread Thread type: UNS - American unified thread Special (UNified thread Special) Here you will find special types of climbs - outside the regular range Size: according to the chosen variant Form: B Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ISO529 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes

Machine Tap, Straight Slot on US Unified inch Thread Size: UNS 1/2 "x 24 LH Angle: 24 Paths per inch Form: B Material: HSS - Rapid Cut Steel Usage: Well-machined materials up to 600 N / mm2 Unalloyed and low alloy steels For through holes

Machine Tap, Straight Groove for American Unified Inch Thread Size: UN 1-5/16" x 12 Pitch: 12 pitches per inch Fit: 2B Form: B Material: HSSE - High Speed ??Steel Usage: Well machinable materials up to 600 N/mm2 Unalloyed and low alloy steels For through holes

Machine Tap, Straight Groove for American Unified Inch Thread Size: UN 13/16" x 16 Pitch: 16 pitches per inch Fit: 2B Form: B Material : HSS - High Speed ??Steel Usage : Well machinable materials up to 600 N/mm2 Non-alloyed and low-alloyed steels For through holes

Machine Tap, Spiral Groove for American Unified Inch Thread Size: UN 11/16" x 16 Pitch: 16 Pitches per Inch Fit: 2B Shape: C Angle spiral grooves: 35° Material: HSSE Use: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes

Machine Tap, Spiral Groove for American Unified Inch Thread Size: UN 11/16" x 20 Pitch: 20 Pitches per Inch Fit: 2B Shape: C Angle spiral grooves: 35° Material: HSSE Use: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes

Machine spiral tap ( high-speed ) UN 11/16x20, R40 SE 800 Size: UN 11/16 x 20 Pitch: 20 steps per inch Fit: 2B, ground thread profile Standard: DIN 374 C Thread pitch: C, 2 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Coating: no coating Helix angle: 40° Usage: Structural and carbon steel, low alloy steel, cast steel up to 800N/mm2 Brass with a long chip Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics

Machine Spiral Tap( Quick Cut) UNS 1.1 / 16 ", R40 SE 800 Size: UNS 1-1 / 16" Ascent: 14 walk to inch Standard: DIN 374 C Run thread: C, 2 courses - see enclosed photo Material: HSSE( High speed steel 5% Cobalt) Coating: without coating angle helix: 40 Â ° < br> Usage: Construction and carbon steel, low-alloyed steel, cast steel up to 800N / mm2 Brass with long cutting Free-cutting steel, construction and cementing steel Spherical and malleable cast iron Non-alloy and low-alloyed alloys copper Alloys aluminum containing Si