Tubular

Product count: 31
  • Machine tap G - HSSE GG TiCN DIN5156C , Fanar

    Machine tap G - HSSE GG TiCN DIN5156C , Fanar
    Recommended ✓

    Machine tap with straight groove, type GG Material: HSSE (High speed steel + 5% Cobalt) Coating: TiCN Ground thread profile Standard: DIN 5156 Application - cast iron 3.1: Gray cast iron up to 400N / mm2 3.2: Ball cast iron up to 550N / mm2 3.3: Malleable cast iron up to 500N / mm2 3.4: Malleable cast iron up to 800N / mm2 3.5: Ductile iron up to 700N / mm2 3.6: Ductile iron up to 1400N / mm2

    from 40,79 € with VAT
  • Forming tap G - HSSE TiN SR, DIN5156, FANAR

    Forming tap G - HSSE TiN SR, DIN5156, FANAR

    Forming tap with lubrication groove Form: C (2 ramps) Material: HSSE (High speed steel) Coating: TiN Standard: DIN 5156, DIN ISO 228 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content

    from 66,20 € with VAT
  • Tapered machine tap NPT, HSS

    Tapered machine tap NPT, HSS

    Short machine NPT conical tap Thread type: NPT (National Pipe Thread) - American inch tubular conical thread Material: HSS Conicity: 1:16 Top angle: 60 °

    from 9,05 € with VAT
  • Machine tap NPT - HSSE, VOLKEL

    Machine tap NPT - HSSE, VOLKEL

    Machine tap, straight groove, for conical pipe thread Thread type: NPT - American conical pipe thread Conicity: 1:16 Top angle: 60 ° Form: C Material: HSSE - High speed cobalt steel Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

    from 30,46 € with VAT
  • Machine tap R - HSSE DIN2999, VOLKEL

    Machine tap R - HSSE DIN2999, VOLKEL

    Machine tap, straight groove, for conical pipe thread Thread type: R / Rc / BSPT - English taper pipe thread Conicity: 1:16 Top angle: 55 ° Form: C Material: HSSE - High speed cobalt steel Standard: DIN 2999, DIN 5156 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

    from 28,00 € with VAT
  • Short machine tap G - HSS, VOLKEL

    Short machine tap G - HSS, VOLKEL

    Short machine tubular whitworth tap Thread type: G / BSP - British Standard Pipe Form: D Standard: DIN 5157 Material: HSS - High speed steel Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

    from 6,61 € with VAT
  • Short machine tap NPT - HSS, VOLKEL

    Short machine tap NPT - HSS, VOLKEL

    Short machine tap, straight groove, for conical tubular thread Thread type: NPT - American conical pipe thread Conicity: 1:16 Top angle: 60 ° Form: C Material: HSS - High speed steel Can also be used as a machine short tap Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

    from 15,56 € with VAT
  • Short machine tap NPT - HSS with chip breaker, VOLKEL

    Short machine tap NPT - HSS with chip breaker, VOLKEL

    Short machine tap, straight slot, for conical tubular thread with chip breaker Thread type: NPT - American conical pipe thread Conicity: 1:16 Top angle: 60 ° Form: B Material: HSS - High speed steel Can also be used as a machine short tap Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

    from 20,61 € with VAT
  • Short machine tap NPT - HSS spiral, VOLKEL

    Short machine tap NPT - HSS spiral, VOLKEL

    Short machine tap, straight slot, for conical tubular spiral thread Thread type: NPT - American conical pipe thread Conicity: 1:16 Top angle: 60 ° Form: C Helix: 35 ° Material: HSS - High speed steel Can also be used as a machine short tap Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

    from 28,00 € with VAT
  • Short machine tap left NPT - HSS, VOLKEL

    Short machine tap left NPT - HSS, VOLKEL

    Left short machine tap, straight slot, for conical tubular thread Thread type: NPT - American conical pipe thread Conicity: 1:16 Top angle: 60 ° Form: C Material: HSS - High speed steel Can also be used as a machine short tap Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

    from 26,87 € with VAT
  • Short machine tap NPTF - HSSE with chip breaker, VOLKEL

    Short machine tap NPTF - HSSE with chip breaker, VOLKEL

    Short machine tap, straight slot, for conical tubular thread with chip breaker Thread type: NPTF - American conical pipe thread (National Pipe Taper Fuel), mechanically-sealing pipe thread Conicity: 1:16 Top angle: 60 ° Form: B Material: HSSE - High speed steel Can also be used as a machine short tap Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

    from 21,61 € with VAT
  • Short machine tap NPTF - HSSE spiral, VOLKEL

    Short machine tap NPTF - HSSE spiral, VOLKEL

    Short machine tap for conical tubular spiral thread Thread type: NPTF - American conical pipe thread (National Pipe Taper Fuel), mechanically-sealing pipe thread Conicity: 1:16 Top angle: 60 ° Form: C Helix: 35 ° Material: HSSE - High speed steel Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

    from 28,00 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Tubular