Homepage Tools for repairing threads

Tools for repairing threads

Product count: 213
  • Self-locking insert for thread repair - metric, length 1.0D, V-Coil

    Self-locking insert for thread repair - metric, length 1.0D, V-Coil

    Self-locking threaded insert made of stainless steel Dimension and pitch: according to the selected variant Length of the insert: 1.0 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7 Self-locking inserts are of particular importance when used in cases where there is vibration or shock stress. V-Coil offers self-locking inserts with sufficient security against loosening. This is achieved by the action of one or more polygonal clamping threads, which are distributed along the length of the insert in such a way that they also exert radial pressure on the internal thread (screw). Each clamping thread has a certain amount of tangential surfaces extending beyond the inner diameter of the loose insert. When screwing in, the bolt or screw moves along the clamping surfaces, which exerts pressure on the internal thread. After unscrewing the screw, the clamping thread assumes its original shape, after screwing the screw back in, sufficient radial pressure is maintained.

    from 0,25 € with VAT
  • Self-locking insert for thread repair - metric, length 1.5D, V-Coil

    Self-locking insert for thread repair - metric, length 1.5D, V-Coil

    Self-locking threaded insert made of stainless steel Dimension and pitch: according to the selected variant Length of the insert: 1.5 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7 Self-locking inserts are of particular importance when used in cases where there is vibration or shock stress. V-Coil offers self-locking inserts with sufficient security against loosening. This is achieved by the action of one or more polygonal clamping threads, which are distributed along the length of the insert in such a way that they also exert radial pressure on the internal thread (screw). Each clamping thread has a certain amount of tangential surfaces extending beyond the inner diameter of the loose insert. When screwing in, the bolt or screw moves along the clamping surfaces, which exerts pressure on the internal thread. After unscrewing the screw, the clamping thread assumes its original shape, after screwing the screw back in, sufficient radial pressure is maintained.

    from 0,27 € with VAT
  • Self-locking insert for thread repair - metric, length 2.0D, V-Coil

    Self-locking insert for thread repair - metric, length 2.0D, V-Coil

    Self-locking threaded insert made of stainless steel Dimension and pitch: according to the selected variant Length of the insert: 2.0 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7 Self-locking inserts are of particular importance when used in cases where there is vibration or shock stress. V-Coil offers self-locking inserts with sufficient security against loosening. This is achieved by the action of one or more polygonal clamping threads, which are distributed along the length of the insert in such a way that they also exert radial pressure on the internal thread (screw). Each clamping thread has a certain amount of tangential surfaces extending beyond the inner diameter of the loose insert. When screwing in, the bolt or screw moves along the clamping surfaces, which exerts pressure on the internal thread. After unscrewing the screw, the clamping thread assumes its original shape, after screwing the screw back in, sufficient radial pressure is maintained.

    from 0,28 € with VAT
  • Thread repair insert for G thread , length 1.5D , V-Coil

    Thread repair insert for G thread , length 1.5D , V-Coil

    Stainless steel threaded insert for repairing G / BSP pipe threads Dimension and pitch: according to the selected variant Length of the insert: 1.5 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread to be repaired , i.e. if you are repairing a G1/4" thread with a 1.5D insert, then the length of the insert is 1.5 times 1/4" (=6.35mm), i.e. 9.525mm. Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7

    from 0,56 € with VAT
  • Thread repair insert for UNC thread , length 1.0D, V-Coil

    Thread repair insert for UNC thread , length 1.0D, V-Coil

    Stainless steel threaded insert for repairing American UNC inch unified thread Dimension and pitch: according to the selected variant Length of the insert: 1.0 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired , i.e. if you are repairing a UNC 1/4" thread with a 1.5D insert, then the length of the insert is 1, 5 times 1/4" (=6.35mm), i.e. 9.525mm. Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7

    from 0,21 € with VAT
  • Thread repair insert for UNC thread , length 1.5D, V-Coil

    Thread repair insert for UNC thread , length 1.5D, V-Coil

    Stainless steel threaded insert for repairing American UNC inch unified thread Dimension and pitch: according to the selected variant Length of the insert: 1.5 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired , i.e. if you are repairing a UNC 1/4" thread with a 1.5D insert, then the length of the insert is 1, 5 times 1/4" (=6.35mm), i.e. 9.525mm. Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7

    from 0,23 € with VAT
  • Thread repair insert for UNC thread , length 2.0D, V-Coil

    Thread repair insert for UNC thread , length 2.0D, V-Coil

    Stainless steel threaded insert for repairing American UNC inch unified thread Dimension and pitch: according to the selected variant Length of the insert: 2.0 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired , i.e. if you are repairing a UNC 1/4" thread with a 1.5D insert, then the length of the insert is 1, 5 times 1/4" (=6.35mm), i.e. 9.525mm. Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7

    from 0,24 € with VAT
  • Thread repair insert for UNC thread , length 2.5D, V-Coil

    Thread repair insert for UNC thread , length 2.5D, V-Coil

    Stainless steel threaded insert for repairing American UNC inch unified thread Dimension and pitch: according to the selected variant Length of the insert: 2.5 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired , i.e. if you are repairing a UNC 1/4" thread with a 1.5D insert, then the length of the insert is 1, 5 times 1/4" (=6.35mm), i.e. 9.525mm. Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7

    from 0,28 € with VAT
  • Thread repair insert for UNC thread , length 3.0D, V-Coil

    Thread repair insert for UNC thread , length 3.0D, V-Coil

    Stainless steel threaded insert for repairing American UNC inch unified thread Dimension and pitch: according to the selected variant Length of the insert: 3.0 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired , i.e. if you are repairing a UNC 1/4" thread with a 1.5D insert, then the length of the insert is 1, 5 times 1/4" (=6.35mm), i.e. 9.525mm. Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7

    from 0,31 € with VAT
  • Thread repair insert for UNF thread , length 1.0D, V-Coil

    Thread repair insert for UNF thread , length 1.0D, V-Coil

    Stainless Steel Thread Insert for Repairing Fine US Inch Unified UNF Thread Dimension and pitch: according to the selected variant Length of the insert: 1.0 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired , i.e. if you are repairing a UNF 1/4" thread with a 1.5D insert, then the length of the insert is 1, 5 times 1/4" (=6.35mm), i.e. 9.525mm. Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7

    from 0,25 € with VAT
  • Thread repair insert for UNF thread , length 1.5D, V-Coil

    Thread repair insert for UNF thread , length 1.5D, V-Coil

    Stainless Steel Thread Insert for Repairing Fine US Inch Unified UNF Thread Dimension and pitch: according to the selected variant Length of the insert: 1.5 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired , i.e. if you are repairing a UNF 1/4" thread with a 1.5D insert, then the length of the insert is 1, 5 times 1/4" (=6.35mm), i.e. 9.525mm. Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7

    from 0,28 € with VAT
  • Thread repair insert for UNF thread , length 2.0D, V-Coil

    Thread repair insert for UNF thread , length 2.0D, V-Coil

    Stainless Steel Thread Insert for Repairing Fine US Inch Unified UNF Thread Dimension and pitch: according to the selected variant Length of the insert: 2.0 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired , i.e. if you are repairing a UNF 1/4" thread with a 1.5D insert, then the length of the insert is 1, 5 times 1/4" (=6.35mm), i.e. 9.525mm. Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7

    from 0,31 € with VAT

Tools for repairing threads