Taps and dies

Product count: 502
  • Machine tap M - left HSSE TiN ISO2 with chip breaker 800X, FANAR

    Machine tap M - left HSSE TiN ISO2 with chip breaker 800X, FANAR

    Left hand machine tap with straight groove and chip breaker 800X Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals

    from 12,90 € with VAT
  • Machine tap M - HSSE ISO2(6H) spiral (40°), FANAR

    Machine tap M - HSSE ISO2(6H) spiral (40°), FANAR

    Machine tap with spiral groove Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

    from 9,56 € with VAT
  • Machine tap M - HSSE TiN ISO2(6H) 800X spiral (40°), FANAR

    Machine tap M - HSSE TiN ISO2(6H) 800X spiral (40°), FANAR

    Machine tap with spiral groove 800X Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 * Food grade stainless steel (does not increase the thread, maintains the prescribed tolerance)

    from 10,83 € with VAT
  • Machine tap M - HSSE HL ISO2 INOX spiral (40°), FANAR

    Machine tap M - HSSE HL ISO2 INOX spiral (40°), FANAR

    Machine tap with spiral groove INOX HL Fitting: ISO2 (6H) Material: HSSE (High speed steel +5% Cobalt) Coating : HL - Balinit HardLube Helix angle: 40° Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage: 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.2 : Austenitic corrosion-resistant steel up to 850N/mm2 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 1100N/mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 * Food-grade corrosion-resistant steel (does not enlarge the thread, keeps the prescribed tolerance)

    from 12,48 € with VAT
  • Machine tap M - HSSE-PM TiAlSiN ISO2(6H) spiral (40°), FANAR

    Machine tap M - HSSE-PM TiAlSiN ISO2(6H) spiral (40°), FANAR
    Recommended ✓

    Machine tap with spiral groove Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Refractory stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with a silicon content of> 10%, up to 400 N / mm2 8.2: Thermosets and hardened plastics

    from 13,24 € with VAT
  • Forming tap M - HSSE-PM TiN ISO2(6HX) without lubrication groove, FANAR

    Forming tap M - HSSE-PM TiN ISO2(6HX) without lubrication groove, FANAR

    Forming tap without lubrication groove Form: C (2 ramps) Fitting: ISO 2, 6HX Material: HSSE-PM (High speed steel + 5% cobalt Co5, sintering) Coating: TiN Standard: DIN 371, DIN 2174, ČSN 223052 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content

    from 15,78 € with VAT
  • Forming tap M - HSSE-PM TiN ISO2(6HX) SR, DIN2174, ČSN 223052, FANAR

    Forming tap M - HSSE-PM TiN ISO2(6HX) SR, DIN2174, ČSN 223052, FANAR

    Forming tap with lubrication groove Form: C (2 ramps) Fitting: ISO 2, 6HX Material: HSSE-PM (High speed steel + 5% cobalt Co5, sintering) Coating: TiN Standard: DIN 371, DIN 2174, ČSN 22 3052 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content

    from 13,18 € with VAT
  • Forming tap M - HSSE-PM TiN ISO3(6GX) SR, DIN2174, ČSN 223052, FANAR

    Forming tap M - HSSE-PM TiN ISO3(6GX) SR, DIN2174, ČSN 223052, FANAR

    Forming tap with lubrication groove Form: C (2 ramps) Fitting: ISO 3, 6GX (plus tolerance - suitable for use eg before galvanizing) Material: HSSE-PM (High speed steel + 5% cobalt Co5, sintering) Coating: TiN Standard: DIN 371, DIN 2174, ČSN 22 3052 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content

    from 17,27 € with VAT
  • Forming tap G - HSSE TiN SR, DIN5156, FANAR

    Forming tap G - HSSE TiN SR, DIN5156, FANAR

    Forming tap with lubrication groove Form: C (2 ramps) Material: HSSE (High speed steel) Coating: TiN Standard: DIN 5156, DIN ISO 228 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content

    from 66,24 € with VAT
  • Forming tap M - HSSE TiN ISO2(6HX) SR, DIN2174, ČSN 223052, FANAR

    Forming tap M - HSSE TiN ISO2(6HX) SR, DIN2174, ČSN 223052, FANAR

    Forming tap with lubrication groove - final sale (new series see 923005 made of sintered HSSE-PM steel) Form: C (2 ramps) Fitting: ISO 2, 6HX Material: HSSE (High speed steel) Coating: TiN Standard: DIN 374, DIN 2174, ČSN 22 3052 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.3: Brass with long chips up to 700N / mm2 7.1: Aluminum up to 350N / mm2 7.2: Aluminum alloys with Si content

    from 29,11 € with VAT
  • Forming tap M - HSSE-PM TiCN ISO2 C(6HX) SR, FANAR

    Forming tap M - HSSE-PM TiCN ISO2 C(6HX) SR, FANAR
    Recommended ✓

    WGN forming tap with lubrication groove Form: C (2 ramps) Fitting: ISO 2, 6HX Material: HSSE - PM (High speed steel + 5% cobalt Co5) Coating: TiCN Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 4.2: Aluminum alloys with silicon admixture from 1% to 7% 4.5: Copper with zinc with long chips

    from 16,03 € with VAT
  • Forming tap M - HSSE-PM TiCN ISO2 E 6HX SR, FANAR

    Forming tap M - HSSE-PM TiCN ISO2 E 6HX SR, FANAR
    Recommended ✓

    WGN forming tap with short lead lubrication groove Form: E (1.5-2 ramps) Fitting: ISO 2, 6HX Material: HSSE - PM (High speed steel + 5% cobalt Co5) Coating: TiCN Standard: DIN371, DIN376 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 4.2: Aluminum alloys with silicon admixture from 1% to 7% 4.5: Zinc-doped long chipped copper

    from 16,03 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Taps and dies