Steep cone

Product count: 44
  • Collet ER clamp on ISO taper, type DIN2080

    Collet ER clamp on ISO taper, type DIN2080

    ISO steep taper collet clamp ISO cone size: according to the selected variant For ER collets: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Throwability: up to 0.005mm Standard: DIN 2080, DIN 6499 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    from 36,70 € with VAT
  • Collet ER clamp on ISO taper , type DIN69871

    Collet ER clamp on ISO taper , type DIN69871

    ISO steep taper collet clamp ISO cone size: according to the selected variant For ER collets: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Balance: G6.3 / 12,000 rpm. , or according to the selected variant Throwability: up to 0.005mm Standard: DIN69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    from 40,57 € with VAT
  • Collet ER clamp on ISO taper, type BT / JIS6339 MAS

    Collet ER clamp on ISO taper, type BT / JIS6339 MAS

    ISO steep taper collet clamp ISO cone size: according to the selected variant For ER collets: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Balance: G6.3 / 12,000 rpm. , or according to the selected variant Throwability: up to 0.005mm Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    from 37,82 € with VAT
  • Collet chuck ISO30 x ER16 BT with a set of 8 collets, L = 70mm

    Collet chuck ISO30 x ER16 BT with a set of 8 collets, L = 70mm

    Clamping pliers ISO 30 x ER 16 - 70L ISO30xER16(30xER16) Clamping shank design for cars. exchange: BT - Max. collet size: 10mm Set contains wrench and 8 collets Standard: JIS B 6339(MAS BT) Throw: up to 0.005mm Collet chucks dimensions: 2-3mm, 3-4mm, 4-5mm, 5-6mm, 6-7mm, 7-8mm, 8-9mm, 9-10mm Balance: G6.3 / 12,000 rpm. Supplied in a plastic case Collet clamping procedure: Snap the collet into the clamping nut - according to the enclosed him a picture.

    In stock
    110,15 € with VAT
  • Collet chuck ISO30 x ER25 BT with a set of 6 collets, L = 70mm

    Collet chuck ISO30 x ER25 BT with a set of 6 collets, L = 70mm

    ISO 30 x ER 25 - 70L Collet Clamp ISO30xER25 (30xER25) Carrying chuck for cars. replacement: BT Max. Collar Size: 16mm Set includes key and 6 collet Standard: JIS B 6339 (MAS BT) Thread: up to 0.005mm Collet Clamp Diameters: 3-4mm, 5-6mm, 7 -8mm, 9-10mm, 11-12mm, 15-16mm Supplied in plastic case Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture.

    On request
    94,10 € with VAT
  • Collet chuck ISO30 x ER25 BT with a set of 10 collets, L = 70mm

    Collet chuck ISO30 x ER25 BT with a set of 10 collets, L = 70mm

    Clamping pliers ISO 30 x ER 25 - 70L ISO30xER25(30xER25) Clamping shank design for cars. exchange: BT - Max. collet size: 16mm Set contains wrench and 10 collets Standard: JIS B 6339(MAS BT) Throw: up to 0.005mm Collet chucks dimensions: 2-3mm, 3-4mm, 4-5mm, 5-6mm, 6-7mm, 7-8mm, 8-9mm, 9-10mm, 11-12mm, 15-16mm G6.3 / 12,000 rpm. Supplied in a plastic case Collet clamping procedure: Snap the collet into the clamping nut - according to the enclosed him a picture.

    On request
    122,56 € with VAT
  • Collet chuck ISO30 x ER32 BT with a set of 6 collets, L = 60mm

    Collet chuck ISO30 x ER32 BT with a set of 6 collets, L = 60mm

    ISO 30 x ER 32 - 60L Collet Clamp ISO30xER32 (30xER32) Clamping shank for autom. replacement: BT Max. collet size: 20mm Set includes key and 6 collet Standard: JIS B 6339 (MAS BT) Thread: up to 0.005mm Collet Clamp Diameters: 5-6mm, 7-8mm, 9 -10mm, 11-12mm, 15-16mm, 19-20mm Supplied in plastic case Collet clamping procedure: Fasten the clamp nut to the clamping nut - according to the attached picture .

    In stock
    107,62 € with VAT
  • Collet chuck ISO30 x ER32 BT with a set of 15 collets, L = 60mm

    Collet chuck ISO30 x ER32 BT with a set of 15 collets, L = 60mm

    Collet chuck ISO 30 x ER 32 - 60L ISO30xER32(30xER32) Clamping shank design for car. exchange: BT - Max. collet size: 20mm Set contains wrench and 15 collets Standard: JIS B 6339(MAS BT) Throw: up to 0.005mm Collet chucks dimensions: 2-3mm, 3-4mm, 4-5mm 5-6mm, 6-7mm, 7-8mm, 8-9mm, 9-10mm, 10-11mm, 11-12mm, 12-13mm, 13-14mm, 15-16mm, 17-18mm, 19-20mm Balance: G6.3 / 12,000 rpm. Supplied in a plastic case Procedure for clamping the collet: Snap the collet into the clamping nut - according to the Attached image.

    In stock
    181,46 € with VAT
  • Collet chuck ISO30 x ER40 BT with a set of 8 collets, L = 80mm

    Collet chuck ISO30 x ER40 BT with a set of 8 collets, L = 80mm

    Clamp Clamp ISO 30 x ER 40 - 80L ISO30xER40 (30xER40) Clamping shank for autom. replacement: BT Max. Clamp size: 30mm Set includes key and 8 collet Standard: JIS B 6339 (MAS BT) Collet clamp diameters: 5-6mm , 7-8mm , 9-10mm , 11-12mm , 13-14mm , 15-16mm , 19-20mm , 24-25mm Supplied in Plastic Trunk Thread: up to 0.005mm Collet Clamping Procedure: Click on Collet into the clamping nut - according to the attached picture.

    In stock
    135,93 € with VAT
  • Collet chuck ISO40 x ER16 BT with a set of 8 collets, L = 70mm

    Collet chuck ISO40 x ER16 BT with a set of 8 collets, L = 70mm

    Pliers clamp ISO 40 x ER 16 - 70L ISO40xER16(40xER16) Clamping shank design for cars. exchange: BT - Max. collet size: 10mm Set contains wrench and 8 collets Standard: JIS B 6339(MAS BT) Throw: up to 0.005mm Collet chucks dimensions: 2-3mm, 3-4mm, 4-5mm, 5-6mm, 6-7mm, 7-8mm, 8-9mm, 9-10mm Balance: G6.3 / 12,000 rpm. Supplied in a plastic case Collet clamping procedure: Snap the collet into the clamping nut - according to the enclosed him a picture.

    In stock
    107,61 € with VAT
  • Collet chuck ISO40 x ER25 BT with a set of 6 collets, L = 70mm

    Collet chuck ISO40 x ER25 BT with a set of 6 collets, L = 70mm

    Clamp Clamp ISO 40 x ER 25 - 70L 6 pliers ISO40xER25 (40xER25) Clamping shank for cars. Replacement: BT Shaft Length with Nut: 40mm Max. Collet size: 16mm Home kit includes a key and 6 pieces of Collet Home Standard: JIS B 6339 (MAS BT) Home pliers clamp diameters: 3-4 mm, 5-6 mm, 7-8 mm, 9-10 mm, 11- 12 mm, 15-16 mm Home Delivered in a plastic case Home runout: 0.005 mm to process clamping collet: Home Clip the collet into the clamping nut - according to the enclosed figure.

    On request
    92,99 € with VAT
  • Collet chuck ISO40 x ER25 BT with a set of 10 collets, L = 70mm

    Collet chuck ISO40 x ER25 BT with a set of 10 collets, L = 70mm

    Collet chuck ISO 40 x ER 25 - 70L 6 pcs of collets ISO40xER25(40xER25) Clamping shank design for cars. exchange: BT Shaft length with nut: 40mm Max. collet size: 16mm Set contains wrench and 10pcs collets Standard: JIS B 6339(MAS BT) Collet chucks diameter: 2-3mm, 3-4mm, 4-5mm, 5-6mm, 6 -7mm, 7-8mm, 8-9mm, 9-10mm, 11-12mm, 15-16mm Balance: G6.3 / 12,000 rpm. Supplied in a plastic case Throw: up to 0.005mm Pliers clamping procedure: Pliers snap the tin into the clamping nut - according to the attached picture.

    On request
    121,46 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Steep cone