Shafts, tap attachments, beams

High quality classic steel adjustable hand beam for taps Clamping range: according to the selected variant Clamping range for orchard taps according to ČSN 223010: according to selected variant Material: steel Standard: ČSN 241126

Hand beam for taps Adjustable range: according to the selected variant Material: cast iron Standard: DIN 1814

Ratchet beam for taps, tap ratchets, tap ratchets Clamping range: according to the selected variant Beam length (short / long) - according to the selected variant It is possible to switch right and left

Extension for tap Square: according to the selected variant Overall length: see description of selected variant Material: Metal (blackened or galvanized / nickel-plated) Standard: ČSN 24 1151 / CSN 241151 or DIN 377 Use for a specific tap size - see the description of the selected variant

Holder for threaded eyes - hand beam (glasses) for round threaded jaw (round threaded jaws) For jaws with a diameter: according to the selected variant For jaws: see description of selected variant Standard: ČSN 241520/24 1520

Insert for glasses / glasses Outer diameter: according to the selected variant Inner diameter: according to the selected variant Material: see description of selected variant

Extension for circular jaw For a jaw with a diameter: according to the selected variant Total length: 60mm Square / driver: 3/8" (9.5mm) On the sides there are locking screws for clamping the eyelet.

Hand beam for taps Adjustable range: according to the selected variant Material: steel Standard: DIN 1814

M3 - M8 Tape Clamping Tape / Tapered Ratchet Jaw Range: 2.5 - 5.0 mm Turning Left & Right Turns Overall Length 86mm Kat. No. 404050

M3 - M12 / M12 / Ratchet Ratchet Torch - length 86mm Threaded bits can be purchased with us. Kat. No. 404104

Hand drill ( glasses ) for circular threaded jaw ( circular threaded jaw ) with a diameter of 13/16" (20.63mm) Standard: DIN 225 Quality production, casting it is massive - see photos.Rear is only suitable for jaws with outer diameters in inches!

Handwheel (circular thread jaws) with diameter 1 "(corresponds to 25,4mm) Standard: DIN 225 Quality production, casting is massive - see pictures The beam is only suitable for jaws with outer diameters in inches!