Set of 8mm turning knives with exchangeable insert
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000193886
- Warranty:
- 24 months
- Code:
- TT-3441011
Product information
Cat. 3441011
SCLCL
- SCLCR
- SDJCR
- SDNC
- SWGCR
- LW ??(Threaded) < QA (dowel)
Further included in the kit is T8 key, IMBUS 3mm and flat screwdriver
Other cutting inserts you can buy with us separately - see related products. <
Knife No. 2, 5, 9, 12, 24: CCMT 060204, CCMT 060202, CCMT 060208 or CCGT (for Aluminum and Non-Ferrous Metals)
For Knife No. 1, 8: WCMX 050308 , WCMX 050304, WCMT 050302, Alternatively WCMT and WCGT (for aluminum and non-ferrous metals)
For knives No. 3, 4, 10 and 11: DCMT 070204, DCMT 070202, DCMT 070208 or DCGT non-ferrous metals)
For Knife No. 7, 14: Part No. 3441161
For Knife No. 6, 13, 15: Part No. 3441162
Accessories
-
Replaceable insert WCMT 050304 TiN
Turning insert VBD WCMT 050304 TiN Radius: 0,4mm Up. hole: 3,2mm Coating: TiN Application: Steel: P20-P35 Stainless steel 28: abrasion resistant 29: M10-M20 > Suitable for turning knife sets(SWGCR 1010 and SWGCR 1212) in wooden case and emergency for SWACR 1010 / SWACR 1212 knives The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock5,84 € with VAT -
Parting plate 3441161 TiN with undercut
Parting replaceable cutting insert for turning knives in wooden jersey size 8x8 and 10x10 mm Insert width: 3.50 mm(resp. 3.44 mm) Insert length: 12.14 mm Face grinding: 0.50 mm Coating: TiN Application: Steel: P20-P35 Stainless steel (abrasion resistant): M10-M20 The plate has a undercut for the original type on the front better chip removal Suitable for knives marked QA1012R-03(for knives size 10x12) Also suitable for older sets of turning knives where inserts were ka uncoated - gray The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock3,42 € with VAT -
Threading 60° insert 3441162 TiN with undercut
Threaded replaceable cutting insert for turning knives in wooden jersey size 8x8, 10x10 and 12x12 mm A AA ™ plate length: 3.00 mm Plate length: 15.00 mm Max. cutting depth: 3 mm Coating: TiN Application: Steel: P20-P35 Stainless steel 28: abrasion resistant 29: M10-M20 The plate has a undercut on the front of the board for better chip removal compared to the original type Suitable for knives marked LW1010R-04(for sizes 10x10) Also suitable for older sets of turning knives, where the inserts were uncoated - gray The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.
In stock3,42 € with VAT -
Replaceable insert DCMT 070204-MF MP20, Kovonastroje
Turning insert VBD DCMT 070204 - MF MP20 Radius: 0,4mm Coating: TiAlN, PVD MP20 series: Substrate on a super micrograin basis, high rigidity, very low adhesion of machined material. Ideal for machining stainless and conventional steels. Application: Steel: P15-P25 Stainless steel: M15-M25 Cast iron: K05-K10 Cutting conditions: Vc = 100 -210 m / min fn = 0.06-0.17 mm / rev. ap = 0,2-2,3 mm Type MF: Special breaker with a sharp beige item preventing the chips from sticking. Suitable for normal machining and finishing - classic steel and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock5,41 € with VAT -
Interchangeable insert CCMT 060204-MF MP20, Kovonastroje
Turning insert VBD CCMT 060204 - MF MP20 Radius: 0,4mm Coating: TiAlN, PVD MP20 series: Substrate on a super micrograin base, high rigidity, very low adhesion of machined material. Ideal for machining stainless and conventional steels. Application: Steel: P15-P25 Stainless steel: M15-M25 Cast iron: K05-K10 Cutting conditions: Vc = 100 - 210 m / min fn = 0.06-0.17 mm / rev. ap = 0,2-2,4 mm Type MF: Special breaker with a sharp beige item preventing the chips from sticking. Suitable for normal machining and finishing - classic steel and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock4,89 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!