Reamers

Machine plug-in reamer for holes (holes) Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS The teeth are in the left helix 7 ° Clamping hole with 1:30 taper Standard: ČSN 221432 / CSN 22 1432 / DIN 219 B / ISO 2402 Holders for clamping: ČSN 241210 / DIN 217 Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. If you haven't found the reamer you're looking for, type or call, we'll check.

Machine plug-in reamer for holes (holes) with straight cutting edges Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS Clamping hole with 1:30 taper Blades with uneven spacing Standard: ČSN 221447 / CSN 22 1447 / DIN219A / DIN 219 A / ISO 2402 Holders for clamping: ČSN 241210 / DIN 217 Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. Not suitable for reaming holes with longitudinal grooves! Reamers are Czech-made, unused, come from excess stock. Only a limited selection. If you haven't found the reamer you're looking for, type or call, we'll check.

Machine plug-in reamer for holes (holes) with screwed teeth (teeth according to ČSN 221435.1) Size and tolerance: according to the chosen variant Clamping hole with 1:30 taper Teeth with uneven spacing Material: HSS The body of the reamer is made of structural steel. Standard: ČSN 221435 / CSN 22 1435 / DIN 220 / ISO 2402 Holders for clamping: ČSN 241210 / DIN 217 Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. Reamers are Czech-made, unused, come from excess stock. Only a limited selection.

Holder for socket drill ČSN221414 or reamers ČSN221432, ČSN221435, ČSN221447 Clamping diameter for reamer / drill: according to selected variant Morse taper: according to the selected variant Material: Structural steel - cemented, hardened Standard: ČSN241210 / 24 1210 / DIN217 / DIN 217 / ISO 2402 The holder includes a carrier ČSN241210.10 Usage info: Scanning of countersinks and reamers is performed by a nut located behind the carrier.

Holder for socket drill ČSN221414 or reamers ČSN221432, ČSN221435, ČSN221447 Clamping diameter for reamer / drill: according to selected variant Morse taper: according to the selected variant Material: Structural steel - cemented, hardened Standard: ČSN241210 / 24 1210 / DIN217 / DIN 217 / ISO 2402 The holder includes a carrier ČSN241210.10 Usage info: Scanning of countersinks and reamers is performed by a nut located behind the carrier.

Reamer under taper thread 1:16, ie NPT, Rc / BSPT, with straight grooves For reaming NPT and Rc (BSPT) threads Shank: cylindrical with square Material: HSS - High speed steel Standard: ASME B94,2-1995 Form: C Dimensions - see attached catalog photo Drill under the reamer - see the attached catalog photo Use: For reaming holes under taper threads type NPT, Rc / BSPT

Taper reamer 1:50, with straight teeth Size: according to the chosen variant Form: A Shank: cylindrical with square Material: HSS - High speed steel Standard: ČSN 221469 / CSN 22 1469 / DIN9A / DIN 9 A Usage: For manual and machine reaming of holes for taper pins 1:50

Cone reamer 1:50, teeth straight Size: according to the chosen variant Form: A - straight teeth Shank: cylindrical with square Material: HSS Co5 - High speed steel + 5% cobalt Standard: ČSN 221469A / CSN 22 1469 A / DIN9A / DIN 9 A / ISO 3465 Usage: For manual and machine reaming of holes for taper pins 1:50

Taper reamer 1:10, straight teeth with even pitch Size: according to the chosen variant Other dimensions - see enclosed catalog sheet Shank: cylindrical with square Material: HSS - High speed steel Standard: ČSN 221460 / CSN 221460 Usage: For manual and machine reaming of cavities for tapered shaft ends 1:10

Taper reamer 1:50 , teeth in left helix 7 ° Size: according to the chosen variant Form: B Shank: cylindrical with square Material: HSS - High speed steel Standard: ČSN 221469B / CSN 22 1469 B / DIN9B / DIN 9 B / ISO 3465 Usage: For manual and machine reaming of holes for taper pins 1:50

Carbide machine hole reamer, cylindrical shank Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Standard: no standard Design: Diameter 2.0 to 9.0 mm - carbide monolith Diameter 10.0 to 20.0 mm - brazed carbide cutting edges Usage: For machine reaming, especially where high cutting speed is required with high precision machined holes and high tool life. Particularly suitable for hard and highly abrasive materials, eg steels, stainless steels, cast iron, refractory materials, titanium alloys

Machine carbide reamer for holes (holes), cylindrical shank with carbide SK cutting edges, straight teeth Size and tolerance: according to the chosen variant Other dimensions - see descriptions of individual variants Tvrdokov: K10 Reamer body: tool steel Standard: ČSN 221370 / CSN 22 1370 / DIN 8050/6301 Usage: For machine reaming, especially where high cutting speed is required with high precision machined holes and high tool life. Particularly suitable for hard and highly abrasive materials, eg steels, stainless steels, cast iron, refractory materials, titanium alloys Main use: Steel with strength up to 1000N / mm2 Stainless steel Cast iron Aluminum Heat-resistant steel (titanium, etc.) Usable: Steel with strength up to 500N / mm2 Steel with strength up to 1400N / mm2 Copper