Plugged

Socket drill with four cutting edges Average: according to the selected variant Other dimensions - see enclosed catalog sheet Material: HSS - high-performance high-speed steel Tolerance: Nominal dimension in tolerance h8 for hole with allowance for further more precise machining. Method of drill production: F (milling) Standard: ČSN 221414 or DIN 222N (ISO 3314) Holders ČSN 241210 (DIN 217) Usage: Machining of pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy. The drills are made in the Czech Republic, unused, they come from excess stock. Only a limited selection.

Socket drill with four cutting edges Average: according to the selected variant Other dimensions - see enclosed catalog sheet Material: HSS - high-performance high-speed steel Tolerance: Nominal dimension in tolerance h8 for hole with allowance for further more precise machining. Method of drill production: F (milling) Standard: ČSN 221414 or DIN 222N (ISO 3314) Holders ČSN 241210 (DIN 217) Usage: Machining of pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy.

Holder for socket drill ČSN221414 or reamers ČSN221432, ČSN221435, ČSN221447 Clamping diameter for reamer / drill: according to selected variant Morse taper: according to the selected variant Material: Structural steel - cemented, hardened Standard: ČSN241210 / 24 1210 / DIN217 / DIN 217 / ISO 2402 The holder includes a carrier ČSN241210.10 Usage info: Scanning of countersinks and reamers is performed by a nut located behind the carrier.

Holder for socket drill ČSN221414 or reamers ČSN221432, ČSN221435, ČSN221447 Clamping diameter for reamer / drill: according to selected variant Morse taper: according to the selected variant Material: Structural steel - cemented, hardened Standard: ČSN241210 / 24 1210 / DIN217 / DIN 217 / ISO 2402 The holder includes a carrier ČSN241210.10 Usage info: Scanning of countersinks and reamers is performed by a nut located behind the carrier.

Plug-in digger with four blades Diameter: 52.5 mm Other dimensions - see attached catalog sheet Clamping hole: 19mm Material: HSS - high-performance high-speed steel Tolerance: nominal dimension in tolerance h8 for the hole with an allowance for more precise machining. Excavator production method: F (milling) Standard: ČSN 221414 or DIN 222N (ISO 3314) CSN 241210 (DIN 217) holders are used for clamping Usage: Machining pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy. Cat. No. : B145250F000S