Permanent magnets

Permanent magnet for rough milling, drilling and grinding. Work area: according to the chosen variant Other dimensions - see product description for individual variants Magnet is waterproof - it can be used with cooling liquid. The pressure is reduced if the clamped surface is uneven (air gaps 100-50%) or contains cast iron (80-50%).

Permanent neodymium (PrNd) magnet Sanding plate with fine pole design. Suitable for holding small and thin workpieces Magnet size: according to the selected variant Other dimensions - see product description for individual variants Nominal clamping force 140N/cm2 Flatness: 0.005mm/100mm Pole distance: Brass (P1) 0.5mm, steel (P2) 1.5mm Accessories: Allen key and clamps for holding the magnet Usable for EDM applications, immersion in dielectric liquids. Usage: under the sander If you need a magnet for a milling machine, we recommend magnets from the PMAG series

Permanent neodymium magnet with unique waterproof/waterproof construction. The fixture is ideal for machining with coolant. If you machine without coolant, it is possible to use the Neomill magnetic clamp. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Nominal clamping force: 160N/cm2 - suitable for milling Pole distance: Steel 11mm, Epoxy (optionally brass) 4mm Clamping surface with even distribution of magnetic force to the edges!!! The body (base) is made of durable and strong material, the pole plate is made of one piece of steel. Anywhere on the pole board, it is thus possible to mill pockets and other auxiliary modifications for series production, without loosening or disintegrating the lamellar board. Usage - universal: milling, drilling, planing, power grinding. Package includes: Clamp, stop bars, switch key and user manual. The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. Cat. no. : NEOMC We are able to customize the magnets to order - for example: * Finish the longitudinal grooves for clamping the magnet * Finish the guide grooves for the guide stones * Cut the threads for fixing the vise * Mill T-slots for T-nuts * Edit stops * Mill beds for series production - all according to your requirements If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

Permanent neodymium magnet with unique waterproof/waterproof construction. The fixture is ideal for machining with coolant. Suitable for milling, planing and heavy grinding. Suitable for machining with or without coolant or with a limited amount of process fluids - MQL method. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Nominal clamping force: 160N/cm2 - suitable for milling Pole distance: Steel 11mm, brass 4mm Clamping surface with even distribution of magnetic force to the edges!!! The body (base) is made of durable and strong material, the pole plate is made of one piece of steel. Anywhere on the pole board, it is thus possible to mill pockets and other auxiliary modifications for series production, without loosening or disintegrating the lamellar board. Usage - universal: milling, drilling, planing, power grinding. Package includes: Clamp, stop bars, switch key and user manual. The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. Cat. no. : NO We are able to customize the magnets to order - for example: * Finish the longitudinal grooves for clamping the magnet * Finish the guide grooves for the guide stones * Cut the threads for fixing the vise * Mill T-slots for T-nuts * Edit stops * Mill beds for series production - all according to your requirements If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

Permanent neodymium magnet for precise flat grinding of very small and thin to large workpieces. The magnet is waterproof - also suitable for EDM. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Nominal clamping force: 100N/cm2 - suitable for flat grinding Pole distance: Steel 1.4mm, brass 0.5mm Clamping surface with even distribution of magnetic force to the edges!!! This magnet is ideal for precise grinding of small, thin and large parts as well as for EDM. Thanks to the waterproof design, it is possible to use a cooling liquid or immerse it in a dielectric liquid. The upper pole plate is composed of brass and steel lamellae, high stability, accuracy and clamping efficiency are guaranteed by maximum concentration of magnetic force into the surface of the workpiece. Usage: surface grinding, EDM electroerosive machining. Package includes: clamp, stop rails, set of clamps, toggle key The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. Cat. no. : NEOC We are able to customize the magnets to order - for example: * Finish the longitudinal grooves for clamping the magnet * Finish the guide grooves for the guide stones * Cut the threads for fixing the vise * Mill T-slots for T-nuts * Edit stops * Mill beds for series production - all according to your requirements If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

The Alustar permanent neodymium magnet is a lightweight version of the Neostar clamp - for clamping workpieces during turning and round grinding. The clamp stands out due to the aluminum construction of the body and low weight. Handles a larger weight range of machined components.Pole plate with radial poles allows you to easily and efficiently machine the face, inner and outer diameter of the workpiece in one operation - without the need to unclamp and re-clamp the workpiece. The possibility of continuously regulating the clamping force facilitates centering. Diameter of the magnet: according to the selected variant Other dimensions - see the attached catalog sheet. Nominal clamping force: 140N/cm2 Very powerful double neodymium magnet system, aluminum base. Unique construction with a screw self-locking switching mechanism for smooth adjustment of the clamping force, which facilitates the centering of the workpiece. The aluminum base reduces the load on the machine tool spindle and increases the possible weight capacity of the workpieces. Very safe, self-locking mechanism preventing the clamp from turning off during machining. Recesses and threads from the underside of the base for clamping to a suitable flange. You can also choose to modify the magnet - tailor-made center drilling, spinning pole plate, pole plate with T-grooves or a set of pole extensions. Usage: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. A big advantage of the clamp is the patented switching mechanism, which allows you to variably set the clamping force and firmly fixes the set clamping force in any position. Thanks to the switching mechanism, you turn on the clamp at 10 to 20% of the force, easily center the workpiece, switch to 100% and proceed to

Permanent neodymium magnet for clamping workpieces during turning and round grinding. Pole plate with radial poles allows you to easily and efficiently machine the face, inner and outer diameter of the workpiece in one operation - without the need to unclamp and re-clamp the workpiece. Diameter of the magnet: according to the selected variant Other dimensions - see the attached catalog sheet. Nominal clamping force: 140N/cm2 Very powerful double neodymium magnet system, steel base. You can also choose to modify the magnet - tailor-made center drilling, spinning pole plate, pole plate with T-grooves or a set of pole extensions. Usage: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. Cat. no. : NEOS If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

Permanent neodymium magnet Maxgrip stands out above all for its high clamping force and versatility. Combination of a pole plate with a relatively fine parallel arrangement of poles. The possibility of continuously regulating the clamping force facilitates the centering of workpieces during turning and grinding. Diameter of the magnet: according to the selected variant Other dimensions - see the attached catalog sheet. Nominal clamping force: 160N/cm2 Pole spacing: 11mm steel, 4mm epoxy Very powerful double neodymium magnet system, steel base. Unique construction with a screw self-locking switching mechanism for smooth adjustment of the clamping force, which facilitates the centering of the workpiece. Very safe, self-locking mechanism preventing the clamp from turning off during machining. Recesses and threads from the underside of the base for clamping to a suitable flange. Usage: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. A big advantage of the clamp is the patented switching mechanism, which allows you to variably set the clamping force and firmly fixes the set clamping force in any position. Thanks to the switching mechanism, you turn on the clamp at 10 to 20% of the force, easily center the workpiece, switch to 100% and proceed to a safe operation. Cat. no. : MAXG If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

Permanent neodymium magnet EDM150250 - 150 x 250 mm for precise flat grinding of very small and thin to large workpieces. The magnet is waterproof - also suitable for EDM. Overall dimensions: Magnet width: 150mm Magnet length: 250mm (pole length is 200mm) Magnet height: 34.5mm Nominal clamping force: 80N /cm2 - suitable for flat grinding Pole distance: Steel 1.4mm, brass 0.5mm Clamping surface with even distribution of magnetic force up to the edges!!! Minimum workpiece size: 4x4x1 mm Magnet regrind limit: 6 mm This magnet is ideal for precise grinding of small, thin and large parts as well as for EDM. Thanks to the waterproof design, it is possible to use a cooling liquid or immerse it in a dielectric liquid. The upper pole plate is composed of brass and steel lamellae, high stability, accuracy and clamping efficiency are guaranteed by maximum concentration of magnetic force into the surface of the workpiece. Usage: surface grinding, EDM electroerosive machining. Package includes: clamp, stop rails, set of clamps, toggle key The clamp is equipped with quality permanent neodymium magnets, we provide full warranty and post-warranty service for magnets. Cat. no. : EDM150250 If you are not sure about the choice - you do not know which magnet is suitable for your work, contact us, we will be happy to help!

Permanent neodymium magnet EDM150300 - 150 x 300 mm for precise flat grinding of very small and thin to large workpieces. The magnet is waterproof - also suitable for EDM. Overall dimensions: Width of the magnet: 150mm Length of the magnet: 300mm (length of the pole is 250mm) Height of the magnet: 34.5mm Nominal clamping force: 80N /cm2 - suitable for flat grinding Pole distance: Steel 1.4mm, brass 0.5mm Clamping surface with even distribution of magnetic force up to the edges!!! Minimum workpiece size: 4x4x1 mm Magnet regrind limit: 6 mm This magnet is ideal for precise grinding of small, thin and large parts as well as for EDM. Thanks to the waterproof design, it is possible to use a cooling liquid or immerse it in a dielectric liquid. The upper pole plate is composed of brass and steel lamellae, high stability, accuracy and clamping efficiency are guaranteed by maximum concentration of magnetic force into the surface of the workpiece. Usage: surface grinding, EDM electroerosive machining. Package includes: clamp, stop rails, set of clamps, toggle key The clamp is equipped with quality permanent neodymium magnets, we provide full warranty and post-warranty service for magnets. Cat. no. : EDM150300 If you are not sure about the choice - you do not know which magnet is suitable for your work, contact us, we will be happy to help!

Set of 2 pieces of permanent magnetic clamping blocks with prism The perfect helper for reliable and very strong clamping of parts during welding, hand grinding, drilling, needling, etc. Clamping force: 5-10kN / cm2 Dimensions: Width: 64mm Length: 143mm Height: 71mm Easy activation with a change-over key - by turning 90 degrees. The blocks have 3 clamping surfaces(top, bottom and side). Magnetic block bodies are completely nickel-plated for high corrosion protection. Clamping blocks can be connected to each other by means of a hexagonal coupling - this makes it possible to create a clamping surface for larger or longer workpieces. Package includes: 2pcs of magnetic blocks * Switching wrenches * Instructions for use Optional accessories: * Connecting hexagonal shank for connecting several magnetic blocks to the series (in a row) * Various adjustments of the saw blades according to the customer's needs Cat.A „. : WBM500

Set of 2 pieces of permanent magnetic clamping blocks with prism The perfect helper for reliable and very strong clamping of parts during welding, hand grinding, drilling, needling, etc. Clamping force: 5-10kN / cm2 Dimensions: Width: 64mm Length: 178mm Height: 71mm Easy activation with a change-over key - by turning 90 degrees. The blocks have 3 clamping surfaces(top, bottom and side). Magnetic block bodies are completely nickel-plated for high corrosion protection. Clamping blocks can be connected to each other by means of a hexagonal coupling - this makes it possible to create a clamping surface for larger or longer workpieces. Package includes: 2pcs of magnetic blocks * Switching wrenches * Instructions for use Optional accessories: * Connecting hexagonal shank for connecting several magnetic blocks to the series (in a row) * Various adjustments of the saw blades according to the customer's needs Cat.A „. : WBM700