Orchard taps

Product count: 38
  • Hand tap M - TS 2N ČSN223010 , CZTOOL

    Hand tap M - TS 2N ČSN223010 , CZTOOL
    Recommended ✓

    Metric hand tap Material: NO - tool steel Fitting: 2N (medium fitting) Standard: ČSN 22 3010 / CSN 223010

    from 1,33 € with VAT
  • Left hand tap M - TS 2N ČSN223010, CZTOOL

    Left hand tap M - TS 2N ČSN223010, CZTOOL

    Hand set left tap Matching: 2N Material: NO - Tool Steel Standard: ČSN 22 3010 / CSN 223010 NO taps are suitable for thread stretching or for piece thread cutting.

    from 1,50 € with VAT
  • Hand tap M - HSS 2N ČSN223010 , CZTOOL

    Hand tap M - HSS 2N ČSN223010 , CZTOOL
    Recommended ✓

    Metric hand tap Material: HSS (high speed steel) Fitting: 2N (medium fitting) Standard: ČSN 22 3010 / CSN 223010

    from 2,75 € with VAT
  • Left hand tap M - HSS 2N ČSN223010, CZTOOL

    Left hand tap M - HSS 2N ČSN223010, CZTOOL

    Hand set left tap Material: HSS (high speed steel) Matching: 2N Standard: ČSN 22 3010 / CSN 223010

    from 3,52 € with VAT
  • Hand tap M - TS ČSN223010 , sale

    Hand tap M - TS ČSN223010 , sale
    Clearance sale

    Metric hand tap Material: tool steel Standard: ČSN 22 3010 / CSN 223010 The taps come from excess stock, made in 19xx, unused

    from 0,47 € with VAT
  • Hand tap M - HSS ČSN223010, Narex

    Hand tap M - HSS ČSN223010, Narex

    Metric hand tap Material: HSS - high speed steel Fitting: ISO1 Standard: ČSN 22 3010 / CSN 223010

    from 1,10 € with VAT
  • Hand tap M left - ČSN223010

    Hand tap M left - ČSN223010

    Left metric hand tap Material: HSS or tool steel Fitting: ISO1 Standard: ČSN 22 3010 / CSN 223010

    from 1,43 € with VAT
  • Hand taps M - HSS DIN352 / DIN2181, VOLKEL

    Hand taps M - HSS DIN352 / DIN2181, VOLKEL

    Metric hand tap Material: HSS (high speed steel) Fitting: ISO2 (6H) Standard: DIN352 / DIN2181 Dimensions - see attached catalog sheet In the set with basic pitch there are 3 pieces of taps, for fine pitch (MF) there are only 2 pieces of taps in the set HSS taps are suitable for tapping common steels (up to 800MPa)

    from 2,69 € with VAT
  • Left hand tap M - HSS DIN352, VOLKEL

    Left hand tap M - HSS DIN352, VOLKEL

    Left metric hand tap Material: HSS (high speed steel) Fitting: ISO2 (6H) Standard: DIN352 / DIN2181 Dimensions - see enclosed catalog sheet In the set with basic pitch there are 3 pieces of taps, for fine pitch (MF) there are only 2 pieces of taps in the set HSS taps are suitable for tapping common steels (up to 800MPa)

    from 14,11 € with VAT
  • Hand tap M - HSSE DIN352 / DIN2181, VOLKEL

    Hand tap M - HSSE DIN352 / DIN2181, VOLKEL

    Metric hand tap Material: HSSE (high speed cobalt steel) Fitting: ISO2 (6H) Standard: DIN352 / DIN2181 Dimensions - see enclosed catalog sheet In the set with basic pitch there are 3 pieces of taps, for fine pitch (MF) there are only 2 pieces of taps in the set HSSE taps are suitable for thread cutting in common steels and stainless steels (up to 1200MPa)

    from 15,45 € with VAT
  • Hand tap M - HSSE PM TiCN HRC40 with guide pin, FANAR

    Hand tap M - HSSE PM TiCN HRC40 with guide pin, FANAR

    Set tap made of sintered steel HSSE-PM There are 3 taps in the set for the basic pitch. For fine pitch, there are 2 taps in the set. The pre-cutting tap has an insert with a drill diameter under the thread Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 352/3-P Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiCN - Titanium Carbon Nitride Ground thread profile Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics

    from 34,52 € with VAT
  • Hand tap M - HSSE OX ISO2 DIN352, NAREX

    Hand tap M - HSSE OX ISO2 DIN352, NAREX

    Metric hand tap M - set There are 3 taps in the set for the basic climb. There are 2 taps in a set for a gentle climb. Material: HSSE - high speed cobalt steel Povak: OX - oxidation Fitting: ISO2 / 6H Standard: DIN352 (replacement ČSN 22 3010 / CSN 223010) Usage: Structural, medium-alloy tool and heat-treated steels with strength up to 1100 MPa Stainless and heat-resistant steels up to 900 MPa Free-cutting, structural and heat-treated steels with a strength of up to 800 MPa Mild structural steels up to 500 MPa Gray, ductile and malleable cast iron Alloyed aluminum and copper alloys

    from 8,57 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Orchard taps