Morse

Product count: 14
  • Collet ER clamp with morse taper for Czech spindles, securing with a drift nut

    Collet ER clamp with morse taper for Czech spindles, securing with a drift nut

    Morse taper collet clamp - for Czech spindles Morse cone: according to the selected variant For ER type collets: according to the selected variant Performance of the ER matrix: according to the selected variant Other dimensions - see product description for individual variants Usage : The collet clamp has an overseas cone driving nut that fits the spindles of Czech machines. I.e. these clamps are suitable for Czech spindles that carry tools through this nut + thread. These clamps are suitable for all types - Czech, Chinese and other - spindles with a morse taper. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    from 30,70 € with VAT
  • Collet ER clamp with morse taper

    Collet ER clamp with morse taper

    Morse taper collet clamp Morse cone: according to the selected variant For ER type collets: according to the selected variant Performance of the ER matrix: according to the selected variant Other dimensions - see product description for individual variants Usage : Suitable for all new spindles where the tools are driven only by the internal thread. This type is not suitable for older Czech spindles, which have a so-called "house" - through which the tools (except the thread) drift. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Standard: DIN228A

    from 24,07 € with VAT
  • Collet chuck MK2 x ER32 with a set of 6 collets, nut T2

    Collet chuck MK2 x ER32 with a set of 6 collets, nut T2

    Morse Clamp Clamp MK 2 x ER32 6 Clamps MK2xER32 (2xER32) Max. collet size: 20mm Clamping thread in cone is M10 Collets can be purchased separately. Contains collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in plastic case Hazigness: up to 0.005mm Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. DIN 228A

    On request
    99,00 € with VAT
  • Collet chuck MK2 x ER32 with a set of 15 collets, nut T2

    Collet chuck MK2 x ER32 with a set of 15 collets, nut T2

    Morse Clamp Clamp MK 2 x ER32 15 Clamps MK2xER32 (2xER32) Max. collet size: 20mm Clamping thread in cone is M10 Collets can be purchased separately. Contains collet: 2-3mm , 3-4mm , 4-5mm 5-6mm , 6-7mm , 7-8mm , 8-9mm , 9-10mm , 10-11mm , 11-12mm , 12-13mm , 13-14mm , 15-16mm , 17-18mm , 19-20mm Supplied in plastic case Hazigness: up to 0.005mm Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. DIN 228A

    On request
    172,85 € with VAT
  • Collet chuck MK3 x ER20 with a set of 8 collets, nut T1

    Collet chuck MK3 x ER20 with a set of 8 collets, nut T1

    Clamp Clamp Clamp with MK 3 x ER 20 8 Clamps MK3xER20 (3xER20) Clamping Thread in Cone M12 Max. collar size: 13mm Other collet sizes can be purchased separately Contains collet: 1,5-2mm; 2-3mm; 3-4mm; 4-5mm; 5-6mm; 7-8mm; 9-10mm; 11-12mm Supplied in Plastic Trunk Thread: up to 0.005mm Clamping Procedure: Fasten the clamp nut to the clamping nut - according to the attached picture. DIN 228A

    On request
    108,27 € with VAT
  • Collet chuck MK3 x ER25 with a set of 6 collets, nut T2

    Collet chuck MK3 x ER25 with a set of 6 collets, nut T2

    Clamp Clamp with MK Cone MK 3 x ER 25 6 Clamps MK3xER25 (3xER25) Clamping Thread in Cone M12 Max. collet size: 16mm Other collet dimensions can be purchased separately Contains collet: 3-4mm; 5-6mm; 7-8mm; 9-10mm; 11-12mm; 15-16mm Supplied in plastic case Fusing: up to 0.005mm Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A

    On request
    85,73 € with VAT
  • Collet chuck MK3 x ER32 with drive nut

    Collet chuck MK3 x ER32 with drive nut

    Clamp Clamp with morse cone MK 3 x ER 32 MK3xER32 (3xER32) Max. Collar Size: 20mm Bolt Threaded Bolt / Bolt: M12 Bolt Nut Diameter: 49mm For Collet Outer Diameter: 32mm Thread: up to 0.005mm ER32 Collet Can be purchased. Collet clamping procedure: Clamp the clamp into the clamping nut - according to the attached picture. DIN 228A

    On request
    37,87 € with VAT
  • Collet chuck MK3 x ER32 with a set of 6 collets, nut T2

    Collet chuck MK3 x ER32 with a set of 6 collets, nut T2

    Clamp Clamp with Morse Cone MK 3 x ER 32 6 Clamps MK3xER32 (3xER32) Clamping Thread in Cone M12 Max. Collet size: 20mm Collet can be purchased separately Set includes collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in plastic case < :

    On request
    99,01 € with VAT
  • Collet chuck MK3 x ER32 with a set of 15 collets, nut T2

    Collet chuck MK3 x ER32 with a set of 15 collets, nut T2

    Clamp Clamp with Morse Cone MK 3 x ER 32 15 Clamps MK3xER32 (3xER32) Clamping Thread in Cone M12 Max. Collet size: 20mm Collet can be purchased separately Set includes collet: 2-3mm , 3-4mm , 4-5mm 5-6mm , 6-7mm , 7-8mm , 8-9mm , 9-10mm , 10-11mm , 11-12mm , 12-13mm , 13-14mm , 15-16mm , 17-18mm , 19-20mm Supplied in plastic case < :

    On request
    172,86 € with VAT
  • Collet chuck MK3 x ER40 with a set of 8 collets, nut T2

    Collet chuck MK3 x ER40 with a set of 8 collets, nut T2

    Clamp Clamp with Morse Cone MK 3 x ER 40 8 Clamps MK3xER40 (3xER40, MK3 / ER40) Max. Collet Size: 30mm Set of Collet: 5-6mm , 7-8mm , 9-10mm , 11-12mm , 13-14mm , 15-16mm , 19-20mm , 24-25mm Supplied in plastic case < :

    In stock
    131,19 € with VAT
  • Collet chuck MK4 x ER25 with a set of 6 collets, nut T2

    Collet chuck MK4 x ER25 with a set of 6 collets, nut T2

    Clamp Clamp with MK Cone MK 4 x ER 25 6 Clamps MK4xER25 (4xER25) Clamping Thread in Cone M16 Max. collet size: 16mm Other collet dimensions can be purchased separately Contains collet: 3-4mm; 5-6mm; 7-8mm; 9-10mm; 11-12mm; 15-16mm Supplied in plastic case Fusing: up to 0.005mm Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A

    On request
    88,71 € with VAT
  • Collet chuck MK4 x ER32 with a set of 6 collets, nut T2

    Collet chuck MK4 x ER32 with a set of 6 collets, nut T2

    Morse clamp clamp MK 4 x ER 32 6 klaskin MK4xER32 (4xER32) Other clamps available separately Max. Collar Size: 20mm Kit Contains Collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in Plastic Case Running: up to 0.005mm < Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A

    In stock
    102,98 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Morse