Morse

Long milling mandrel with Morse taper for clamping cylindrical / disc cutters and saws. Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part: according to the selected variant The other end of the mandrel is stored in the bearing of the extendable arm. Standard: ČSN 241433 / CSN 24 1433 Goods from excess stock, unused. Pins may have slight surface corrosion caused by improper storage.

Milling mandrel, mandrel for attaching socket cutters, for socket cutters with clamping on stones Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Other dimensions: see product description for individual variants Standard: PN241441 Suitable for older (Czech) spindles of milling machines, where the tool is carried over the nut in addition to the thread.

Combined milling mandrel for end mills with longitudinal or transverse guide groove Clamping Morse cone: according to the selected variant Shaft diameter for cutter: according to the selected variant Other dimensions - see attached photo The delivery includes: a pen, a drive ring and a screw with a cross head. Usage - universal, i.e. : - for milling cutters with drift behind face stones - for cutters with drift through the pen Standard: DIN6358

Milling mandrel with conical shank for cylindrical end mills, mandrel for holding cutters Clamping Morse cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Standard: ČSN 241413 The goods come from excess stock, unused

Milling mandrel with pen and spacers / spacer rings Clamping Morse cone: according to the selected variant Shaft diameter for cutter: according to the selected variant Other dimensions: see product description for individual variants * To mount machine saw blades, it is necessary to remove the drive pin.

Milling spindle, spindle clamping pin, for spindle moulders with clamping on stones Clamping cone: MK3, M12 internal thread Clamping diameter for milling cutters: 22mm Length of shaft for socket milling cutter: 18mm Width of stones: 10mm Overall length: 152mm PN 24 1441

Milling cutter MK2 M10 threaded conical

Milling spindle with taper shank for cylindrical milling cutter, Milling cutter pin MK3 thread with M12 internal thread Clamping diameter for milling cutters: 22mm Clamping length: 47mm < br> Screw: M10 with cross head ČSN 241413 Goods coming from abnormative stocks, unused