Milling

Product count: 1041
  • Carbide grooving mill 2fl. 30° TiAlN , CERANIT

    Carbide grooving mill 2fl. 30° TiAlN , CERANIT
    Recommended ✓

    Carbide (TK) milling cutter for grooving Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Progressive groove milling, hole drilling Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

    from 9,17 € with VAT
  • Carbide slotting cutter 2 pcs. 35° AlTiCrN up to 50 HRC, MAXMILL50

    Carbide slotting cutter 2 pcs. 35° AlTiCrN up to 50 HRC, MAXMILL50
    Recommended ✓

    Carbide ( TK ) grooving cutter Number of blades: 2 pcs. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 35° Other dimensions - see the attached catalog sheet Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Slotting cutter, the cutter has 1 cutting edge through the middle Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

    from 5,92 € with VAT
  • Carbide grooving mill 2fl. 30° , CERANIT

    Carbide grooving mill 2fl. 30° , CERANIT

    Carbide (TK) slot milling cutter - uncoated Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: uncoated Usage: Progressive groove milling, hole drilling Suitable for milling steel and mild adhesive steels (aluminum, copper, brass, etc.) Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

    from 8,70 € with VAT
  • Carbide slotting cutter 2 pcs. 55°, ALUMILL-NANO

    Carbide slotting cutter 2 pcs. 55°, ALUMILL-NANO

    Carbide ( TK ) cutter for milling grooves Number of blades: 2 pcs. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 55° Clamping shank: see attached catalog sheet Carbide: nano fine grain carbide Coating: without coating Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Progressive milling of grooves, drilling of holes Suitable for milling steel and soft sticky steels - aluminum, copper, brass, etc. Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

    from 5,77 € with VAT
  • Milling arbor for drill chuck with taper

    Milling arbor for drill chuck with taper

    Taper milling mandrel for drill chuck (mandrel to chuck), female thread type Spindle taper (morse): according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK1 = thread M8 MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 Cone for the header: according to the selected variant Clamping of the drill chuck directly into the milling spindle, ie for milling machines with a Morse spindle taper.

    from 5,94 € with VAT
  • Milling arbor for drill chuck with thread

    Milling arbor for drill chuck with thread

    Taper milling mandrel for drill chuck (mandrel to chuck), type with internal thread in Morse taper and external thread for chuck clamping Spindle taper (morse): according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK1 = thread M8 MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 Thread for the header: according to the selected variant Clamping of a drill chuck directly into the milling spindle, ie for milling machines with a Morse spindle taper. Use: for clamping a drill chuck, it can also be used to clamp something else.

    from 7,78 € with VAT
  • Carbide corner cutter 3fl. 30 ° TiAlN, CERANIT

    Carbide corner cutter 3fl. 30 ° TiAlN, CERANIT

    Carbide (TK) milling cutter for universal milling - corner Number of edges: 3bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

    from 10,49 € with VAT
  • Carbide corner cutter long 3fl. 30 ° TiAlN, CERANIT

    Carbide corner cutter long 3fl. 30 ° TiAlN, CERANIT

    Carbide (TK) milling cutter for universal milling - long corner Number of edges: 3bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

    from 12,46 € with VAT
  • Carbide universal cutter 4 pcs. 35° AlTiCrN up to 50HRC, MAXMILL50

    Carbide universal cutter 4 pcs. 35° AlTiCrN up to 50HRC, MAXMILL50
    Recommended ✓

    Carbide ( TK ) milling cutter for universal milling Number of blades: 4 blades. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 35° Other dimensions - see the attached catalog sheet Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

    from 7,10 € with VAT
  • Carbide universal milling cutter 4fl. 45 ° TiAlN 65HRC , CERANIT

    Carbide universal milling cutter 4fl. 45 ° TiAlN 65HRC , CERANIT
    Recommended ✓

    Carbide (TK) milling cutter for universal milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

    from 11,14 € with VAT
  • Carbide universal milling cutter 4fl. 30 ° TiAlN 45HRC, CERANIT

    Carbide universal milling cutter 4fl. 30 ° TiAlN 45HRC, CERANIT

    Carbide (TK) milling cutter for universal long milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping, high reliability on CNC machines Cutting conditions - see attached photo

    from 18,15 € with VAT
  • Carbide corner cutter long 3fl. 45 ° TiAlN, CERANIT

    Carbide corner cutter long 3fl. 45 ° TiAlN, CERANIT

    Carbide (TK) milling cutter for universal milling - long corner Number of edges: 3bř. Diameter of the working part: according to the selected diameter, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

    from 10,54 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Milling