Milling

Conical drill mandrel for drill chuck (mandrel for chuck) Spindle taper: according to the selected variant Cone for the header: according to the selected variant Standard: MAS BT / JIS 6339 B - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Usage: milling machine, NC - with automatic tool change This mandrel can also be used in machines with manual tool change.

Front and corner milling head for replaceable inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type VBD - triangular positive: according to the selected variant (TPUN 2204 / TPKR 2204 / TPKN 2204) Angle: 90° The packaging is without VBD It is a so-called peeling cutter - the plates do not have chip breakers - they are flat. Suitable for machining cast iron, or ordinary steel and, in an emergency, stainless steel (for stainless steel, use inserts with a chip breaker - type TPKR 2204, brand Iscar).

Front and corner milling head for replaceable inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type VBD - triangular positive: according to the selected variant (TPUN 2603 / TPKR 1603 / TPKN 1603 / TPCN 1603 / TPMN 1603) Angle: 90° The packaging is without VBD It is a so-called peeling cutter - the plates do not have chip breakers - they are flat. Suitable for machining cast iron, or ordinary steel and, in an emergency, stainless steel (for stainless steel, use inserts with a chip breaker - type TPKR 2204, brand Iscar).

Front milling head for replaceable inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type VBD - triangular positive: according to the selected variant - type RDMT 10T3 The packaging is without VBD Suitable for small removal - leveling of surfaces, large areas, etc.

Fine-tooth circular circular saw Diameter: according to the selected variant Disc width: according to the selected variant Diameter of the clamping hole: according to the selected variant Material: HSS - unless otherwise stated Usage: steel, cast iron, non-ferrous metals, plastics Standards: CSN 222910.1 - disc with body grinding towards the center - does not grip the material CSN 222910 - disc with full body profile

Single-edge / single-tooth end mill, 1 tooth through the center with a cylindrical shank Diameter D (js16): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions: see the attached catalog sheet Number of blades: 1 blade. ( 1 pc. ) Helix angle: 30° Head angle: 20° Material: HSSCo5 (contains 5% cobalt) Standard: DIN 844, DIN1835A Usage: For machining in 3 axes For aluminum and aluminum alloys up to 500 Mpa Non-ferrous metals and plastic Order no. code - series: 100405

Side and corner cutter / holder for replaceable cutting inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates - triangular positive: according to the selected variant Other dimensions: see catalog sheet Angle: 90° The packaging is without VBD

Miller for prismatic (dovetail) guides (dovetail) with cylindrical shank Cutter angle: according to the selected variant Diameter of the cutter - Dmax: according to the selected variant Other dimensions - see product description for individual variants Material: HSS Standard: ČSN 222260 / CSN 22 2260

Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: DIN 2080 / ČSN241440 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Weldon clamp for clamping a cutter with a cylindrical shank and a locking surface for a screw Clamping cone: according to the selected variant Clamping diameter for cutter: according to the selected variant Length of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Usage: For machines with manual change Standard: DIN 1835-B, ČSN 247205.1, DIN 2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Direct milling collet with Morse taper - for direct clamping For a tool with a diameter: according to the selected variant Morse cone : MK1 Internal thread of collet: M6 Other dimensions: see product description for individual variants Usage : For direct clamping of tools with a cylindrical shank The collet is hardened: HRC 44-48 Material: tool steel with high flexibility (65Mn)