Milling

Carbide (TK) milling cutter for universal milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) universal milling cutter short - from cemented carbide, two cutting edges in the center Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Corner radius: according to the selected variant Helix angle: 35° / 38° Head angle: 10° Other dimensions - see the attached catalog sheet Standard: DIN6527L Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlCrN ) Usage : Automatic and structural steel (group 1) up to 600 MPa Automatic and structural steel (group 3) up to 1100 MPa Automatic and structural steel (group 5) up to 1100 MPa Stainless steel (group 1) up to 750 MPa Stainless steel (group 2) 750-850 MPa Cast iron (group 1) up to 820 MPa Cast iron (group 2) above 800 MPa Refractory steel (Cr-Ni alloys) up to 1500 MPa Refractory steel (Titanium and its alloys) up to 1250 MPa Hardened steel up to 54HRC - up to 1920 MPa Hardened steel up to 60HRC - up to 2210 MPa Cutting conditions - see attached photo or catalog sheet Order no. No. - series: S141602R

Conical drill mandrel for drill chuck (mandrel for chuck) Spindle taper: according to the selected variant Cone for the header: according to the selected variant Standard: DIN2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Usage: milling machine - with manual tool change

Carbide (TK) milling cutter suitable for finishing and roughing Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 39/41 ° - variable helix Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Thanks to the variable helix, the cutter has excellent anti-vibration properties for side milling, where it is possible to use the entire length of the helix. The cutter runs smoothly. The cutter has 2 cutting edges across the center, a reinforced core. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter suitable for finishing and roughing Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 39/41 ° - variable helix Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Thanks to the variable helix, the cutter has excellent anti-vibration properties for side milling, where it is possible to use the entire length of the helix. The cutter runs smoothly. The cutter has 2 cutting edges across the center, a reinforced core. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling, long - made of cemented carbide Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 40° / 42° Head angle: 12° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlCrN ) Usage : Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S151602

Carbide (TK) milling cutter for universal milling, long - from cemented carbide, with weldon surface Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 40° / 42° Head angle: 12° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlCrN ) Usage : Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S151612

Conical drill mandrel for drill chuck (mandrel for chuck) Spindle taper: according to the selected variant Cone for the header: according to the selected variant Standard: DIN 69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Usage: milling machine, NC - with automatic tool change

Hartmetall (TK)-Fräser zum universellen Fräsen Kantenanzahl: 6br. Durchmesser des Arbeitsteils: je nach gewählter Variante, Toleranz h10 Spirale: 45° Hartmetall: K20 F - ultrafeinkörniges Hartmetall Beschichtung: PVD (TiAlN) Verwendung: Fräser für Schlichtoperationen Universeller Einsatz, geeignet zur Bearbeitung von hitzebeständigen Stählen und wärmebehandelten Werkzeugstählen Auch für Thermo- und Hydrospannung geeignet Schnittbedingungen - siehe beigefügtes Foto

Carbide (TK) milling cutter for universal milling extra long Number of edges: 6br. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Cutter for finishing operations Universal use, suitable for machining heat-resistant steels and heat-treated tool steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling finishing long - from cemented carbide Number of blades: 6 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 45° Head angle: 12° Bevel of the tooth on the forehead: 45°, s=0.05 - 4.2mm Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlTiN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S131602L

Carbide ( TK ) milling cutter for universal milling finishing long - from cemented carbide Number of blades: 6 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 45° Head angle: 12° Bevel of the tooth on the forehead: 45°, s=0.05 - 4.2mm Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlTiN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S131602E