Micrometers and pasameters

Caliper micrometer Scope: according to the selected variant With calibration / without calibration: without calibration, unless otherwise stated Division: 0.01 mm Suitable for calibration

Hole micrometer, internal cavity micrometer Scope: according to the selected variant With calibration / without calibration: without calibration, unless otherwise stated Division: 0.01mm Further information - see product description for individual variants Carbide measuring tips

Caliper micrometer Scope: according to the selected variant Division 0.01 mm Other dimensions - see attached table or product description for individual variants Suitable for calibration

The caliper is used to measure diameters, thicknesses and lengths Scope: according to the selected variant Fixed steel stirrup The movable touch is retracted using a button Finely adjustable opposite measuring touch with simple locking Measuring spindles made of hardened steel, measuring surfaces fitted with carbide Adjustable centering stop for adjustment to the center of the measuring surface Constant measuring force independent of the human factor The meter is supplied in a wooden case

Digital three-touch cavity meter / digital three-touch Scope: according to the selected variant Division: 0.001 mm Standard: DIN863 The setting ring is part of the package for micrometers up to a diameter of 100 mm. From a diameter of 100 mm (inclusive) it is supplied without a ring.

Caliper micrometer Scope: according to the selected variant Division: 0.01mm Standard: DIN 863 / ČSN 251420

Cycle micrometer digital Scope: according to the selected variant Subtraction 0.001mm Further information - see product description for individual variants Accuracy according to DIN 863 Data output to PC Degree of protection IP54 (against splashing water and partly against dust) Battery power supply 1.5V LR44

Cycle micrometer digital Range: 0 - 25 mm Division: 0.001mm Further information - see product description for individual variants Accuracy according to DIN 863 Data output to a PC (a PC connection set can also be purchased - order no.: 6040.92) IP65 degree of protection (against splashing water and fully against dust) Battery power supply 1.5V LR44

Cycle micrometer digital PROFESSIONAL with rapid advance, with data output, ABS Scope: according to the selected variant Division: 0.001mm Further information - see product description for individual variants Rapid feed: The caliper is fixed (does not rotate), the feed is carried out by a lever under the display - when the lever is released, the contacts automatically feed back towards the measured surface - by a spring mechanism inside the micrometer. IP67 degree of protection: Dustproof, protected against water jets in different directions Battery: CR2032 A USB cable for connecting to a PC can be purchased with the micrometer (see attached photos), order code: 6040.9

Digital internal cavity micrometer for measuring holes Scope: according to the selected variant Division: 0.001mm Further information - see product description for individual variants

Dial analog gear micrometer / dial micrometer Scope: according to the selected variant Division: 0.01mm Other dimensions - see product description for individual variants

Dial digital gear micrometer / plate micrometer Scope: according to the selected variant Division: 0.01mm Other dimensions - see product description for individual variants