Metric thread

V-Coil kit for thread repair Dimension and pitch: according to the selected variant Contents of the set: according to the selected variant, see the attached catalog sheet for details The lengths of the inserts are always a multiple of the diameter of the thread being repaired, i.e. for example, if you are repairing an M6 thread and the set includes 1.5D inserts, then the length of the insert is 1.5 times 6mm, i.e. 9mm. If you need a shorter or longer insert, we can offer separately in lengths 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length doesn't suit you, you can adjust the length - cut, grind, pinch - as possible, just be careful - the inserts are stainless steel, it won't be easy. Thread repair method: 1. You drill out the damaged thread with the enclosed drill 2. You cut the thread with the attached (special) tapper (the use of other, e.g. common set or machine tappers does not work) 3. With the help of the supplied inserter, insert the insert to the desired depth (beware, the inserts cannot be turned back!) 4. Use a punch (if included in the set) or pliers to break out the insertion part on the insert

Thread repair kit Dimension and pitch: according to the selected variant Set contents: see product description for individual variants The lengths of the inserts are always a multiple of the diameter of the thread being repaired, i.e. for example, if you are repairing an M6 thread and the set includes 1.5D inserts, then the length of the insert is 1.5 times 6mm, i.e. 9mm. If you need a shorter or longer insert, we can offer separately in lengths 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length doesn't suit you, you can adjust the length - cut, grind, pinch - as possible, just be careful - the inserts are stainless steel, it won't be easy. Thread repair method: 1. You drill out the damaged thread with the enclosed drill 2. You cut the thread with the attached (special) tapper (the use of other, e.g. common set or machine tappers does not work) 3. With the help of the supplied inserter, insert the insert to the desired depth (beware, the inserts cannot be turned back!) 4. Use a punch (if included in the set) or pliers to break out the insertion part on the insert

V-Coil M5-M12 thread repair workshop kit - only normal pitch / thread repair Kit includes: Threads: M5x0.8 , M6x1.0 , M8x1.25 , M10x1.5 , M12x1.75 Drills: 5.2mm , 6.3mm , 8.3mm , 10.4mm , 12.4mm Loaders, breakers and threaded inserts in length 1.0D / 1.5D and 2.0D (10pcs from each length) The lengths of the inserts are always a multiple of the diameter of the thread being repaired, i.e. if you are repairing an M6 thread and there are 1.5D inserts in the set, then the length of the insert is 1.5 times 6mm, i.e. 9mm. If you need a shorter or longer insert, we can offer separately in lengths 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length doesn't suit you, you can adjust the length - cut, grind, pinch - as possible, just be careful - the inserts are stainless steel, it won't be easy. Method of thread repair: 1. You drill out the damaged thread with the attached drill ( if it is included in the set) 2. You cut the thread with the attached (special) tapper (using other - set or machine tappers does not work) 3. With the help of the enclosed inserter, you introduce the insert to the desired depth (note, the inserts cannot be turned back!) 4. Use a punch ( if it is included in the set) or use pliers to break out the insertion part on the insert

V-Coil M5-M12 Thread Repair Workshop Set - Only Common Creep. / Thread Repair Kit contains: Taps: M5x0,8, M6x1,0, M8x1,25, M10x1,5, M12x1,75 Drills: 5,2mm, 6 , 3mm, 8,3mm, 10,4mm, 12,4mm Inserts lengths are always a multiple of the diameter of the thread to be repaired, ie if you repair the M6 ??thread and the set is 1,5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

V-Coil Thread Repair Kit M6-M14x1,25 / Thread Repair Kit contains: Taps: M6x1,0, M8x1,25, M10x1,5, M12x1,75, 14x1 , 25 Drills: 6,3mm, 8,3mm, 10,4mm, 12,4mm Inserts length are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. (If included in the set) or pliers break the insertion part on the insert Photo is for illustrative purposes only

V-Coil Thread Repair Kit M6-M14x1,25 / Thread Repair Kit contains: Taps: M6x1,0, M8x1,25, M10x1,5, M12x1,75, special - stepped 14x1,25 Drills: 6,3mm, 8,3mm, 10,4mm, 12,4mm Loaders, Breakers and Threaded Insert Liner Lengths < / b> is always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

Taps : M6x1,0, M8x1,25, M10x1,5 Drills: 6,3mm, 8,3mm, 10,4mm Insert lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

M10x1.0 Thread Repair Kit / Stern Thread Repair Gradient: 1.0 - Fine Gradient stacked candles. 1pcs - ) 5pcs - threaded inserts of 2.0D (after insertion into a thread about 20mm) Insert lengths are always a multiple of the diameter of the thread to be repaired, ie if you repair a thread M6 and in the set are 1.5D inserts, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Cut the thread with a (special) tap (use of other - machine or taps does not work) 2. Using the supplied boot loader, insert the insert to the required depth (be careful, the inserts can not be retightened!) 3. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

M12x1,25 mm Thread Repair Kit / Socket Thread Repair Gradient: 1,25 - Fine Grip stacked candles. 1pcs - ) 5pcs - threaded inserts in 2,0D (after insertion into a thread about 24mm) Insert lengths are always a multiple of the diameter of the thread to be repaired, ie if you repair a thread M6 and in the set are 1.5D inserts, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Cut the thread with a (special) tap (use of other - machine or taps does not work) 2. Using the supplied boot loader, insert the insert to the required depth (be careful, the inserts can not be retightened!) 3. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

M14 Thread Repair Kit (M14x1,25) mm / Socket Thread Repair Grip: 1,25 - Fine Grip Set contains: 1pcs - Special Stage Tap - Works as well drill bits 1pcs 5pcs length liners are each a multiple of the diameter of the repair of the thread, i.e. e.g. if correcting M6 thread and the set of the inserts 1.5D, then the length of the insert of 1.5 6 mm, 9 mm, therefore. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Cut the thread with a (special) tap (use of other - machine or taps does not work) 2. Using the supplied boot loader, insert the insert to the required depth (be careful, the inserts can not be retightened!) 3. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

M5, M6, M8, M10, M12, M12 Thread Repair Workshop / Thread Repair Gradient: basic pitch, ie M5x0,8; M6x1,0; M8x1,25; M10x1,5 and M12x1,75 Set contains: 5pcs - HSS grinded drill 5pcs - Special tap 5pcs - 25 25 25 25 10pcs - threaded inserts 1,5D Compatible with V-COIL and HELI-COIL Insert lengths are always a multiple of the diameter of the thread to be repaired, eg if you are repairing the M6 ??thread and the set is 1,5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

Large workshop set for thread repair M6, M8, M10 / thread repair Pitch: basic pitch, ie M6x1,0; M8x1.25 and M10x1.5 Set contains: 3pcs - HSS ground drill 3pcs - Special tap 3pcs - Loader 3pcs - Breaker 25 25 25 - threaded inserts 1,5D Compatible with V-COIL and HELI-COIL The inserts are always a multiple of the diameter of the thread being repaired, ie. if you are repairing an M6 thread and there are 1.5D inserts in the set, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D . If the length is still not suitable, you can adjust the length - cut, grind, pinch - if possible, just be careful - the inserts are stainless steel, it does not go completely easily. How to fix a thread: 1. You are drilling a damaged thread with a drill bit( if) 2 is included in the kit. To solve the thread by attaching(special) to the tap (the use of other - set or machine taps does not work) 3. With the help of the enclosed loader, insert the insert to the required depth(Caution, the inserts cannot be pulled back!) 4. Ejector( if) is included in the kit or you can use pliers to break out the lead on the insert