Homepage Marking and labeling

Marking and labeling

Product count: 140
  • Stamping set - numbers, PROFI

    Stamping set - numbers, PROFI
    Recommended ✓

    Professional punches for metal, for castings - set of punches, punches, number punches Set includes: numbers ( 0-9 ) Size: according to the selected variant Other dimensions - see product description for individual variants Phosphated, hardened, nickel plated. Hardness: 59-63 HRC Packaged in a plastic box with a lid. Usage : For materials with strength up to 45 HRC These professional dies are suitable for stamping in castings and solid material

    from 5,74 € with VAT
  • Outline slider with replaceable carbide tip

    Outline slider with replaceable carbide tip

    Drawing caliper / slider for outlining Scope: according to the selected variant The slider is supplied in a leather case

    from 4,63 € with VAT
  • A sliding scale for outlining

    A sliding scale for outlining

    Outlining sliding scale - marking slide / slide with stop, so-called lera Scope: according to the selected variant Division: 0.1 mm

    from 21,76 € with VAT
  • Stamping set - numbers with square no.3 , PROFI

    Stamping set - numbers with square no.3 , PROFI
    Recommended ✓

    Professional punches for metal, for castings - set of punches, punches, number punches The set contains: numbers ( 0-9 ), the number "3" has a different font / font style Size: according to the selected variant Other dimensions - see product description for individual variants Phosphated, hardened, nickel plated. Hardness: 59-63 HRC Packaged in a plastic box with a lid. Usage : For materials with strength up to 45 HRC These professional dies are suitable for stamping in castings and solid material Attention, the number "3" has a straight upper curve in this size

    7,27 € with VAT
  • Stamping set - letters, PROFI

    Stamping set - letters, PROFI
    Recommended ✓

    Professional punches for metal, for castings - set of punches, punches, alphabet letter punches - alphabet Set includes: characters ( A-Z ) Size: according to the selected variant Other dimensions - see product description for individual variants Phosphated, hardened, nickel plated. Hardness: 59-63 HRC Packaged in a plastic box with a lid. Usage : For materials with strength up to 45 HRC These professional dies are suitable for stamping in castings and solid material

    from 14,01 € with VAT
  • Stamping set - numbers - type GERMANY, PROFI

    Stamping set - numbers - type GERMANY, PROFI
    Recommended ✓

    Professional punches for metal, for castings - set of punches, punches, number punches, GERMANY type - narrower font Set includes: numbers ( 0-9 ) Size: according to the selected variant Other dimensions - see product description for individual variants Phosphated, hardened, nickel plated. Hardness: 59-63 HRC Standard: DIN1451 Packaged in a plastic box with a lid. Usage : For materials with strength up to 45 HRC These professional dies are suitable for stamping in castings and solid material

    from 8,07 € with VAT
  • Stamping set - letters - type GERMANY, PROFI

    Stamping set - letters - type GERMANY, PROFI
    Recommended ✓

    Professional punches for metal, for castings - set of punches, punches, alphabet letter punches - alphabet, GERMANY type Set includes: characters ( A-Z ) Size: according to the selected variant Other dimensions - see product description for individual variants Phosphated, hardened, nickel plated. Hardness: 59-63 HRC Standard: DIN1451 Packaged in a plastic box with a lid. Usage : For materials with strength up to 45 HRC These professional dies are suitable for stamping in castings and solid material

    from 16,76 € with VAT
  • Stamping set - dotted numbers, PROFI

    Stamping set - dotted numbers, PROFI
    Recommended ✓

    Professional dot / dot punches for metal, for castings - a set of punches, punches, number punches with a light dotted profile Set includes: numbers ( 0-9 ) Size: according to the selected variant Other dimensions - see product description for individual variants Phosphated, hardened, nickel plated. Hardness: 59-63 HRC Packaged in a plastic box with a lid. Usage : For materials with strength up to 45 HRC These professional dies are suitable for stamping in castings and solid material Advantages of embossing with these dies: Thanks to the dotted stamping method, the contact surface is reduced, which makes it possible to stamp using lower pressure than with classic punches. At the same time, the stress on the stamped material is reduced.

    from 11,50 € with VAT
  • Stamping set - dotted letters, PROFI

    Stamping set - dotted letters, PROFI
    Recommended ✓

    Professional dot / dot punches for metal, for castings - set of punches, punches, alphabet letter punches - alphabet with light dotted profile Set includes: characters ( A-Z ) Size: according to the selected variant Other dimensions - see product description for individual variants Phosphated, hardened, nickel plated. Hardness: 59-63 HRC Packaged in a plastic box with a lid. Usage : For materials with strength up to 45 HRC These professional dies are suitable for stamping in castings and solid material Advantages of embossing with these dies: Thanks to the dotted stamping method, the contact surface is reduced, which makes it possible to stamp using lower pressure than with classic punches. At the same time, the stress on the stamped material is reduced.

    from 33,42 € with VAT
  • Stamping set with holder , PROFI

    Stamping set with holder , PROFI

    Professional punches for metal, for castings - set of punches, punches, letter and number punches, set of 100 punches for marking codes Size: according to the selected variant Max. number of punches per punch: 9 pcs The set includes: 1x punch 2x characters (A-Z) 4x numbers (1-9) or sign for the number 6/9 a total of 5 times 1x ampersand (&) 2x forward slash (/) 2x hyphen (-) 5x demarcation punches 1x Allen key Other dimensions - see product description for individual variants Phosphated, hardened, nickel plated. Hardness: 59-63 HRC Packaged in a plastic box with a lid. Usage : For materials with strength up to 45 HRC These professional dies are suitable for stamping in castings and solid material Use a press for embossing

    from 212,96 € with VAT
  • Holder for mini punches, PROFI

    Holder for mini punches, PROFI

    Holder for small punches with ratchet handle Size: according to the selected variant Max. number of punches per punch: 9 pcs Suitable for punches of size: 3mm: Block (W x H): 3.5 x 6.35 mm, punch length: 19mm 5mm: Block (W x H): 5.5 x 7.95 mm, punch length: 22mm 6mm: Block (W x H): 5.5 x 7.95 mm, punch length: 22mm Suitable for sets - see related products You can use a press or a hammer for stamping

    from 39,86 € with VAT
  • Stamping set - small letters, PROFI

    Stamping set - small letters, PROFI
    Recommended ✓

    Professional punches for metal, for castings - set of punches, punches, small alphabet letter punches - small alphabet Set includes: characters ( a-z ) Size: according to the selected variant Other dimensions - see product description for individual variants Phosphated, hardened, nickel plated. Hardness: 59-63 HRC Packaged in a plastic box with a lid. Usage : For materials with strength up to 45 HRC These professional dies are suitable for stamping in castings and solid material

    from 25,59 € with VAT

Marking and labeling