Magnet. clamps, demagnetizers

Permanent magnet for rough milling, drilling and grinding. Work area: according to the chosen variant Other dimensions - see product description for individual variants Magnet is waterproof - it can be used with cooling liquid. The pressure is reduced if the clamped surface is uneven (air gaps 100-50%) or contains cast iron (80-50%).

Permanent neodymium (PrNd) magnet Sanding plate with fine pole design. Suitable for holding small and thin workpieces Magnet size: according to the selected variant Other dimensions - see product description for individual variants Nominal clamping force 140N/cm2 Flatness: 0.005mm/100mm Pole distance: Brass (P1) 0.5mm, steel (P2) 1.5mm Accessories: Allen key and clamps for holding the magnet Usable for EDM applications, immersion in dielectric liquids. Usage: under the sander If you need a magnet for a milling machine, we recommend magnets from the PMAG series

Very strong pressure, suitable for machining plastic, glass, copper, wood, stainless steel, aluminum and other non-ferrous / non-magnetic metals Size: according to the selected variant Work surface: see product description for individual variants Minimum workpiece size: 60x60mm Quick clamping - within 4-6 seconds, after clamping the vacuum holds even in case of compressor failure. Suitable for CNC plotters / CNC milling machines and grinders. Clamping force: 220-1000N / mm2 - depending on the quality of the clamped surface. Working pressure: 3-8bar (ideally 3.5bar) Vacuum generation using an integrated venturi tube (part of the board) Material: Aluminum alloy Instructions for use: 1) Thread a rubber seal around the surface into which the workpiece will be inserted. 2) Insert the workpiece into the area bounded by the seal 3) Connect the compressor to one of the two inputs (one is always blinded). 4) Press the button on the board to start the down pressure. Advantages : High clamping force Universal use Using the sealing cord, small irregularities on the surface of the workpiece can be defined. Vacuum plates can be interconnected and combined Negligible pressure consumption - cost reduction The package also includes: clamps, spare rubber seal

Permanent neodymium magnet with unique waterproof/waterproof construction. The fixture is ideal for machining with coolant. If you machine without coolant, it is possible to use the Neomill magnetic clamp. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Nominal clamping force: 160N/cm2 - suitable for milling Pole distance: Steel 11mm, Epoxy (optionally brass) 4mm Clamping surface with even distribution of magnetic force to the edges!!! The body (base) is made of durable and strong material, the pole plate is made of one piece of steel. Anywhere on the pole board, it is thus possible to mill pockets and other auxiliary modifications for series production, without loosening or disintegrating the lamellar board. Usage - universal: milling, drilling, planing, power grinding. Package includes: Clamp, stop bars, switch key and user manual. The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. Cat. no. : NEOMC We are able to customize the magnets to order - for example: * Finish the longitudinal grooves for clamping the magnet * Finish the guide grooves for the guide stones * Cut the threads for fixing the vise * Mill T-slots for T-nuts * Edit stops * Mill beds for series production - all according to your requirements If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

Permanent neodymium magnet with unique waterproof/waterproof construction. The fixture is ideal for machining with coolant. Suitable for milling, planing and heavy grinding. Suitable for machining with or without coolant or with a limited amount of process fluids - MQL method. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Nominal clamping force: 160N/cm2 - suitable for milling Pole distance: Steel 11mm, brass 4mm Clamping surface with even distribution of magnetic force to the edges!!! The body (base) is made of durable and strong material, the pole plate is made of one piece of steel. Anywhere on the pole board, it is thus possible to mill pockets and other auxiliary modifications for series production, without loosening or disintegrating the lamellar board. Usage - universal: milling, drilling, planing, power grinding. Package includes: Clamp, stop bars, switch key and user manual. The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. Cat. no. : NO We are able to customize the magnets to order - for example: * Finish the longitudinal grooves for clamping the magnet * Finish the guide grooves for the guide stones * Cut the threads for fixing the vise * Mill T-slots for T-nuts * Edit stops * Mill beds for series production - all according to your requirements If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

Permanent neodymium magnet for precise flat grinding of very small and thin to large workpieces. The magnet is waterproof - also suitable for EDM. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Nominal clamping force: 100N/cm2 - suitable for flat grinding Pole distance: Steel 1.4mm, brass 0.5mm Clamping surface with even distribution of magnetic force to the edges!!! This magnet is ideal for precise grinding of small, thin and large parts as well as for EDM. Thanks to the waterproof design, it is possible to use a cooling liquid or immerse it in a dielectric liquid. The upper pole plate is composed of brass and steel lamellae, high stability, accuracy and clamping efficiency are guaranteed by maximum concentration of magnetic force into the surface of the workpiece. Usage: surface grinding, EDM electroerosive machining. Package includes: clamp, stop rails, set of clamps, toggle key The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. Cat. no. : NEOC We are able to customize the magnets to order - for example: * Finish the longitudinal grooves for clamping the magnet * Finish the guide grooves for the guide stones * Cut the threads for fixing the vise * Mill T-slots for T-nuts * Edit stops * Mill beds for series production - all according to your requirements If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

The BJP electromagnetic clamp is one of the most versatile electromagnetic clamps. Suitable for demanding grinding of a wide range of parts from a minimum size of 35x35x3mm. Thanks to the combined pole spacing, it clamps even massive parts very well. The electromagnet is operated simply by pressing a button on the control unit, which also enables variable force settings to create optimal clamping conditions. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Nominal clamping force: 130N/cm2 - suitable for power and final surface grinding of medium to large workpieces. Pole spacing: 4mm steel, 1mm brass, large pole spacing approx. 42mm. Poling: transverse (longitudinal can be supplied on request) Supplied including stop rails. Easy control through the control unit (must be purchased). It is also possible to perform automatic demagnetization via the control unit. Voltage: 110V (DC) Usage - Power sanding, large-scale final sanding. Package includes: Clamp with cable (standard 6m), set of clamps, user manual. We provide full warranty and post-warranty service for the magnet. Cat. no. : BJP If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

Electric magnet with unique waterproof/waterproof construction, oval pole with epoxy filling and multiple protection against spillage. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Nominal clamping force: 130N/cm2 - suitable for power and final surface grinding of medium to large workpieces. Pole pitch: T48mm Insulation between the individual poles is made of hardened epoxy resin. Supplied including stop rails. The pole plate is made from one piece of steel. The body is made of one piece of steel, the coils are completely covered in epoxy, a high-quality galvanized foil between the body and the pole plate of the magnet. Easy control through the control unit. Voltage: 110V (DC) Usage - Power sanding, large-scale final sanding. Package includes: Clamp with cable (standard 6m), set of clamps, user manual. We provide full warranty and post-warranty service for the magnet. Cat. no. : ELMG We are able to customize the magnets to order - for example: * Finish the guide grooves for the guide stones * Cut the threads for fixing the vise * Mill T-slots for T-nuts * Supply additional stop rails, or adjust according to requirements. * Mill beds for series production - all this and more according to your requirements If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

The simple single-axis permanent magnetic sine table with Neomicro permanent magnet is suitable for high precision angle grinding, EDM and measuring. You can choose a model with angle adjustment in the longitudinal axis or with angle adjustment in the transverse axis. Angle adjustment is performed using end gauges based on the principle of the sine function. Extreme accuracy even after a long period of use. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Setting angles in the range 0-45° (or transverse 0-30°) Accuracy: +- 0.005mm per 100mm Nominal clamping force: 100N/cm2 Pole distance: Steel 1.4mm, brass 0.5mm Polling: transverse Clamping surface with even distribution of magnetic force to the edges!!! Hardened base plate for exceptional stability. It is optionally possible to equip this table with another fixture (Neomill, Electrofine...) - on request. This magnet is fitted with a Neomicro magnetic holder and is ideal for precision grinding of small, thin and large parts as well as EDM. Thanks to the waterproof design, it is possible to use a cooling liquid or immerse it in a dielectric liquid. The upper pole plate is composed of brass and steel lamellae, high stability, accuracy and clamping efficiency are guaranteed by maximum concentration of magnetic force into the surface of the workpiece. Usage: surface grinding, EDM electroerosive machining. Package includes: sine mag. clamp, switch key, table for quick angle adjusquick angle adjustment, user manual The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. Cat. no. : SINES If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

Two-axis permanent magnetic sine table with Neomicro permanent magnet is suitable for high precision angle grinding, EDM and measurement. The possibility of tilting in the longitudinal and transverse axis. Angle adjustment is performed using end gauges based on the principle of the sine function. Extreme accuracy even after a long period of use. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Adjustment of angles in the range: longitudinal 0-45°, transverse 0-30° Nominal clamping force: 100N/cm2 Pole distance: Steel 1.4mm, brass 0.5mm Polling: transverse Clamping surface with even distribution of magnetic force to the edges!!! Hardened base plate for exceptional stability. It is optionally possible to equip this table with another fixture (Neomill, Electrofine...) - on request. This magnet is fitted with a Neomicro magnetic holder and is ideal for precision grinding of small, thin and large parts as well as EDM. Thanks to the waterproof design, it is possible to use a cooling liquid or immerse it in a dielectric liquid. The upper pole plate is composed of brass and steel lamellae, high stability, accuracy and clamping efficiency are guaranteed by maximum concentration of magnetic force into the surface of the workpiece. Usage: surface grinding, EDM electroerosive machining. Package includes: sine mag. clamp, switch key, table for quick angle adjustment, user manual The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. Cat. no. : SINCE If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

The Alustar permanent neodymium magnet is a lightweight version of the Neostar clamp - for clamping workpieces during turning and round grinding. The clamp stands out due to the aluminum construction of the body and low weight. Handles a larger weight range of machined components.Pole plate with radial poles allows you to easily and efficiently machine the face, inner and outer diameter of the workpiece in one operation - without the need to unclamp and re-clamp the workpiece. The possibility of continuously regulating the clamping force facilitates centering. Diameter of the magnet: according to the selected variant Other dimensions - see the attached catalog sheet. Nominal clamping force: 140N/cm2 Very powerful double neodymium magnet system, aluminum base. Unique construction with a screw self-locking switching mechanism for smooth adjustment of the clamping force, which facilitates the centering of the workpiece. The aluminum base reduces the load on the machine tool spindle and increases the possible weight capacity of the workpieces. Very safe, self-locking mechanism preventing the clamp from turning off during machining. Recesses and threads from the underside of the base for clamping to a suitable flange. You can also choose to modify the magnet - tailor-made center drilling, spinning pole plate, pole plate with T-grooves or a set of pole extensions. Usage: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. A big advantage of the clamp is the patented switching mechanism, which allows you to variably set the clamping force and firmly fixes the set clamping force in any position. Thanks to the switching mechanism, you turn on the clamp at 10 to 20% of the force, easily center the workpiece, switch to 100% and proceed to

Permanent neodymium magnet for clamping workpieces during turning and round grinding. Pole plate with radial poles allows you to easily and efficiently machine the face, inner and outer diameter of the workpiece in one operation - without the need to unclamp and re-clamp the workpiece. Diameter of the magnet: according to the selected variant Other dimensions - see the attached catalog sheet. Nominal clamping force: 140N/cm2 Very powerful double neodymium magnet system, steel base. You can also choose to modify the magnet - tailor-made center drilling, spinning pole plate, pole plate with T-grooves or a set of pole extensions. Usage: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. Cat. no. : NEOS If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!