Lubricants and cutting oils

Shell Corena S2 R46 is a high quality compressor oil Quantity: according to the selected variant * Poured from a barrel, packed in plastic containers or canisters Designed for lubrication of rotary and screw air compressors Contains carefully selected additives that ensure reliable protection and constant performance of compressors operating with a maximum discharge temperature of 100°C and with pressures up to 15 bar, with an oil change interval of up to 4000 hours

Water-miscible coolant. It does not contain boron, chlorine and secondary amines. Home AG COOL B 553 is a semisynthetic, water-miscible coolant medium high content of mineral oil which forms a stable emulsion in a wide range of hardness and composition of conventional plants with extremely durable Home contains additives to lower its freezing point of the concentrate Home Contains high performance EP / AW sulfur-free additive Designed for medium to high machining performance Suitable for cutting, turning, milling, drilling and threading, including grinding of ferrous metals incl. stainless steel, Inconel, titanium steels, cast iron, aluminum and plastic alloys Highly flammable in soft water with a hardness of less than 5 ° dH (90 ppm) and vice versa, it can be used in water to a hardness of 25 ° dH (400 ppm), which forms a stable emulsion with excellent rinsing and cooling ability high stability, low loss of yield Home prolong the tool life Home Extremely low foaming even at high pressures and soft water | excellent rinsing capacity Not irritating to skin Excellent corrosion protection Very resistant to microorganisms Extended lifetime

Cutting oil in a squeeze bottle. Universal use. Suitable for medium to heavy machining of unalloyed and alloyed steel, titanium, chrome-nickel steel, manganese-carbon steel, cast iron and non-ferrous metals such as aluminum, copper, brass. Easy dosing Usage: cutting, drilling, threading and grinding of all steels

Cutting paste in a metal can. Universal use. Suitable for unalloyed and alloyed steel, cast iron and non-ferrous metals such as aluminum, copper, brass. The wax sticks well to the tool, does not drip or spray like normal cutting oils Ideal for working in difficult positions (overhead, etc.) Usage: cutting, drilling, threading and grinding of all common steels

Cutting paste in a squeeze tube. Universal use. Suitable for unalloyed and alloyed steel, cast iron and non-ferrous metals such as aluminum, copper, brass. The wax sticks well to the tool, does not drip or spray like normal cutting oils Ideal for working in difficult positions (above the head etc.) Application without other tools (brushes etc) Usage: cutting, drilling, threading and grinding of all common steels

Powerful cutting oil for normal structural steels and non-ferrous metals. dilutable: = 5% oil for normal structural steel and non-ferrous metals Home oil = 10% for higher strength steel and stainless steel Home for heavy duty machining oil can be added to mix up to 50% water

Powerful cutting oil for normal structural steels and non-ferrous metals, 2.5 liter packaging Prevents corrosion Does not contain any heavy metals Free of nitrate and chlorine Also suitable for applications with minimal lubrication. Dilutable with water: 5% oil = for common structural steels and non-ferrous metals 10% oil = for steels with higher strength and noble © steels With increasing demands on machinability, increase the dilution ratio - possibly only after use without dilution with water. * Always pour oil into water, never the other way around! Usage: cutting, milling, grinding, drilling and cutting threads

Powerful cutting oil in spray for machining all steels and non-ferrous metals. No compressed gas with a hand pump.

Foam spray for cutting threads, highly effective for various types of machining of steels and non-ferrous metals. Volume: 400ml It adheres very well to the instrument, it does not drip and do not spray. It is suitable for working in demanding conditions, for example. overhead and in situations where dripping / spraying is a problem. Also suitable for working with machines that are not equipped with a cooling system. Advantages: excellent adhesion, does not drip or spray around like a regular liquid Increases the durability of the tool Increases the quality machined surface Sulfur or oil free Usage: Excellent for cutting, milling, drilling and cutting threads common steels and non-ferrous metals. How to use: Direct use on a workpiece or tool.

Universal use. Suitable for steel, stainless steel, poorly machinable materials, non-ferrous metals such as aluminum, copper, brass. The wax holds well on the tool, does not drip or spray like ordinary cutting oils Ideal for working in difficult positions (above the head, etc.) Chlorine free Usage: cutting, drilling, threading and grinding of all common steels. Also suitable for machining hard-to-machine materials such as titanium, manganese steel, cast steel, chrome-nickel or molybdenum steel, non-ferrous steels such as aluminum, copper and brass.

Univerzální použití. Vhodná pro ocel, nerez , špatně obrobitelné material, neželezné kovy jako je hliník, měď, mosaz. Vosk dobře drží na nástroji , neodkapává ani se nerozprašuje jako běžné řezné oleje Ideální pro práci v obtížných polohách (nad hlavou apod.) Bez obsahu chloru Použití : řezání, vrtání, řezání závitů a broušení všech běžných ocelí. Vhodný také při obrábění špatně obrobitelných materiálů jako je titan, manganová ocel, litá ocel, chrom-niklová nebo molybdenová ocel, neželezné oceli jako hliník, měď a mosaz.

Designed for non-ferrous metals, such as aluminum, copper, brass. Wax holds well on tool Ideal for working in difficult positions (above the head, etc.) Chlorine free