Lamellar blocks

Lamella magnetic block, induction pads Suitable for permanent magnets and electromagnets. Width x Length x Height: according to the selected variant Pole pitch: 3mm steel, 1mm brass The minimum order quantity is 1-3 pieces depending on the size. Contact us for more information. Lamella blocks make it possible to create an optimal clamping surface for workpieces that, due to their shape, cannot be clamped on the classic surface of a magnetic clamping plate. It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the clamped workpiece. Another advantage is the possibility of additional processing (machining) of this block for differently shaped workpieces. Compared to cheap lamellar blocks from other manufacturers (e.g. Vertex), these blocks are not glued, but soldered - in significantly higher quality. Blocks can be cut in half and modified according to current needs.

Lamella magnetic block, induction pads Suitable for permanent magnets and electromagnets. Width x Length x Height: according to the selected variant Pole pitch: 3mm steel, 1mm brass The minimum order quantity is 1-3 pieces depending on the size. Contact us for more information. Lamella blocks make it possible to create an optimal clamping surface for workpieces that, due to their shape, cannot be clamped on the classic surface of a magnetic clamping plate. It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the clamped workpiece. Another advantage is the possibility of additional processing (machining) of this block for differently shaped workpieces. Compared to cheap lamellar blocks from other manufacturers (e.g. Vertex), these blocks are not glued, but soldered - in significantly higher quality. Blocks can be cut in half and modified according to current needs.

Lamella magnetic block, induction pads Pole spacing: Suitable for permanent magnets and electromagnets. Width: 35mm Height: 16mm Length: 60mm The lamellar blocks allow you to create an optimal clamping surface for workpieces that, due to their shape, cannot be clamped on the classic surface of the magnetic clamping plate . It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the clamped workpiece. Another advantage is the possibility of additional processing (machining) of this block for differently shaped workpieces. Order no. no.: 2015-400

Lamel Magnetic Block Polar Pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 50mm Height: 25mm Lenght: 100mm Lamellar Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to the classical surface of a magnetic clamping plate . It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-401

Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 58mm Height: 45mm Lenght: 51mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to their classical surface by a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-402

Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm Length: 110mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped on to the classical surface of a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-403

Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm Length: 110mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped on to the classical surface of a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Discounted Goods - Without Original Box

Set contains 8 pcs of lamellar magnetic blocks of the following dimensions: 2x flat 46x60x15, pole pitch 2 2,5mm 4x flat 50x100x25, pole pitch 2,5 3mm 2x with double V-groove 9 and 18mm , 57x49x46, pole pitch 3,5 3,5mm Suitable for permanent magnets and electromagnets. Laminar prismatic blocks allow you to create an optimal clamping surface for workpieces that can not be clamped onto the classical surface of a magnetic clamping plate for their shape. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Obj. No. 2015-410

Magnetic cube with prismatic groove with switch Width: 54mm Height: 73mm Length: 70mm Width prisms: 38mm Clamping force prisms: 30kg < br> Ord. A „. : 2015-510

Magnetic cube with prismatic groove with switch Width: 60mm Height: 73mm Length: 125mm Width prisms: 38mm Clamping force prisms: 35kg Ord. Ä. : 2015-511

Set of 2 pcs of precisely ground pair of lamella prismatic cubes with switch Suitable for permanent magnets and electromagnets. Width: 110mm Height: 74mm Length: 45mm Prism width: 60mm Prism clamping force: 17kg < br> Lamellar prismatic blocks make it possible to create an optimal clamping surface for workpieces which, due to their shape, cannot be clamped to the classic flat magnetic clamping plate. It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field fixture is not suitable for clamping the workpiece. Ord. Ä. : 2015-521

Set of 2 pcs of precisely ground pair of lamella prismatic cubes with switch Suitable for permanent magnets and electromagnets. Width: 150mm Height: 100mm Length: 50mm Prism width: 90mm Prism clamping force: 23kg < br> Lamellar prismatic blocks make it possible to create an optimal clamping surface for workpieces which, due to their shape, cannot be clamped to the classic flat magnetic clamping plate. It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field fixture is not suitable for clamping the workpiece. Ord. Ä. : 2015-522