ISO / MK

Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Reduction insert, milling reduction with Morse cavity - for clamping threaded tools - milling cutters Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant The tool inserted into this reducer is clamped in the inner cone with a screw. Standard: ČSN 247211.1, DIN 2080 Usage: Clamp / mandrel for cutters with a conical shank For clamping in ISO steep taper milling machine - manual tool change (DIN2080)

Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 69871, ČSN 247212 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN69871 / ČSN 247211 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN69871 / ČSN 247211 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Reducing insert, milling reduction with Morse cavity - for clamping threaded tools - milling cutters, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 69871-A, PN 247212 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Reducing insert, milling cutter ISO50 / MK3, 50/3, 50x3 For taper milling machines: ISO50 Retractable thread thread: M24 Inner taper: Morse, MK 3, thread M12 Standard: A „A’SN 241481 / DIN2080 Application: Clamp / mandrel for milling cutters with taper shank MK3 For clamping in a milling machine with taper ISO50, internal thread M24

Extra short reduction insert with morse cavity, ISO40 / MK4, 40/4, 40x4 - . Internal cone: Morse, MK 4 Length: 60 mm (specifies the length of the case that will protrude out of the machine) Standard: replacement for DIN 2080, ČSN 247213, 220432 Strength: Case quenched, then ground (like all others). This type of case was manufactured in the 1960s as an accessory for TOS milling machines Usage: Clamp / mandrel for milling cutters < / b> with Taper Shank MK4 For Clamping with ISO40 Conical Milling Machine Clamping Procedure: After inserting the sleeve into the spindle, the sleeve is fixed over two screws firmly to the spindle machinery. The tool is inserted directly into the sleeve, the sleeve is through, so the tool is tightened directly, in the case of the MK4 cone with the M16 screw.