Holders and collets 5C

Pliers 5C Diameter: according to the selected variant Accuracy / runout: 0.013mm Dimensions - see attached photo Material: Hardened steel 40 - 45 HRC Clamping parts 55 - 60 HRC Usage: - lathe - grinder

Pliers 5C square Size of the square: according to the selected variant Accuracy / runout: 0.013mm Dimensions - see attached photo Material: Hardened steel 40 - 45 HRC Clamping parts 55 - 60 HRC Usage: - lathe - grinder

Pliers 5C hexagon Hexagon size: according to the selected variant Accuracy / runout: 0.013mm Dimensions - see attached photo Material: Hardened steel 40 - 45 HRC Clamping parts 55 - 60 HRC Usage: - lathe - grinder

Collet universal chuck for 5C collets with Camlock size 3 Clamping ranges: 5C collets round: 1-28mm 5C collets square: 3-19mm 5C collets hexagon : 3-22mm Parameters : Diameter : 125mm Clamping : Camlock D3 ( Cone diameter Dmax=53.90mm ; 3x pin on circle 70.60mm) Clamp height: 123mm Total height including D3 pins: 150mm Speed: 6000 rpm Square for tightening / loosening: 9x9mm Usage: This collet chuck is suitable for lathes and grinders, it is mounted directly on the lathe spindle. Together with the 5C collet set, it is used for effective and precise clamping of smoothed materials in the range of diameters from 1 to 28 mm.

Collet universal chuck for 5C collets with Camlock size 6 Clamping ranges: 5C collets round: 1-28mm 5C collets square: 3-19mm 5C collets hexagon : 3-22mm Parameters : Diameter : 125mm Clamping : Camlock D6 ( Cone diameter Dmax=106.30mm ; 6x pin on a circle 133.40mm) Clamp height: 145mm Total height including D5 pins: 190mm Speed: 6000 rpm Square for tightening / loosening: 9x9mm Usage: This collet chuck is suitable for lathes and grinders, it is mounted directly on the lathe spindle. Together with the 5C collet set, it is used for effective and precise clamping of smoothed materials in the range of diameters from 1 to 28 mm.

Collet universal chuck for 5C collets with Camlock size 8 Clamping ranges: 5C collets round: 1-28mm 5C collets square: 3-19mm 5C collets hexagon : 3-22mm Parameters : Diameter : 125mm Clamping : Camlock D8 ( Cone diameter Dmax=139.70mm ; 6x pin on a circle 171.40mm) Clamp height: 155mm Total height including D5 pins: 195mm Speed: 6000 rpm Square for tightening / loosening: 9x9mm Usage: This collet chuck is suitable for lathes and grinders, it is mounted directly on the lathe spindle. Together with the 5C collet set, it is used for effective and precise clamping of smoothed materials in the range of diameters from 1 to 28 mm.

Holder for 5C collet, 30 holes Holder without collet