Height adjustable tailstock 80-108mm, TS-1
| 80-108mm / TS-1 |
In stock
(6x)
|
159,42 € with VAT |
| 115-145mm / TS-2 |
In stock
(5x)
|
159,42 € with VAT |
| 130-200mm / TS-3 |
In stock
(2x)
|
154,35 € with VAT |
| 190-260mm / TS-4 |
In stock
(1x)
|
147,34 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000010534
- Brand:
- VERTEX
- Warranty:
- 24 months
- Code:
- 1001-022
Product information
Axis: adjustable in the height range 80-108 mm, after turning the body it is possible to reduce the axial height to 46mm
Possibility to adjust the angle of the inclination of the tip: -30 to 30 °
Fixed Tip: 28mm
Base: 94x134mm
Mounting Screws: max M14
Guide Groove Groove: 16mm
Suitable for rotary tables and dividers: HV-4, HV-6, VSI- 4, VSI-5, BS-0, BS-0-J, VUT-6, VU-100, VU-150
Ord. No. 1001-022
Variants
Accessories
-
Divider 100mm for indirect division with tailstock, BS-0
Universal dividing head, 100mm axis, With cutter blades available, 15-49 parts per division possible Diameter: Diameter Flanges: 130mm Morse 2 - 40: 1 Gear ratio For the use of a rigid tip with a carrier, or a flange for attaching the universal chuck or the face plate. Divider has 91x163mm base, holes for fastening bolts up to M14 Support stand is adjustable in horizontal plane, tilt option Scope of delivery: Koník Unprocessed flange pr. 140mm Three Cutting Discs Centering Tip Ref. No. 1001-050
On request595,16 € with VAT -
Rotary table 110mm under the round milling machine, HV-4
High-quality rotary dividing table - 110 mm circular cutter < 16 "or T11 / M10 or T11 / M8 nuts can be purchased - see" Related goods " Clamping: Horizontal - 2 stones 12mm Clamping: Vertical - 2 milled areas for clamps - Packaging) Axial heights: Vertical clamping: 80mm Table height: Horizontal clamping: 58mm Vertical clamping: 138mm Maximum allowable table load: Horizontal clamping: 35kg Vertical clamping: 18kg Nonius: b> 1 turn = 4 ° rotation 1 dashes = 1 '(one minute) Maximum resolution: 20'' (20 seconds) Turn and nonius can be locked in the selected position . In the middle of the plate is the centering hole MK2. The bottom bearing surface is ground, equipped for storing center stones. Order No.: 1001-000
In stock276,78 € with VAT -
Rotary table 150mm under the round milling machine, HV-6
Horizontal and vertical clamps 16 "or nuts can be purchased - see" Related goods " Guide stones 2pcs: 16mm - not included! Stones need to be adjusted - the groove in the table is lower than the height of the stones according to the ČSN standard. b> Axis heights: Vertical clamping: 102mm Table height: Horizontal clamping: 78mm > Vertical clamping: 205mm Maximum permissible table load: Horizontal clamping: 40kg Vertical clamping: 20kg Nonius: b> 1 turn = 4 ° rotation 1 dashes = 1 '(one minute) Maximum resolution: 20'' (20 seconds) Turn and nonius can be locked in the selected position ..................... seating area is ground, equipped for storing centering stones. Order No.: 1001-001
In stock292,34 € with VAT -
Dividing table with universal chuck 100/3, VSI-4
Dělící přístroj - dělička je vhodná pro použití se sloupovou vrtačkou nebo k frézceTyp sklíčidla : 100/3 (zn. Vertex)Průchozí díra ve sklíčidle : průměr 21mmRozměry stolu : 187x146mmVýška včetně sklíčidla : 135mmŠířka boční upínací drážky stolu : 13,7mmDalší rozměry - viz přiložený katalogový list.Plochou páčkou je možné dělení s aretací po 15°Kulatou páčkou se stůl aretuje v dané pozici.Obj. č. : 1001-064
In stock343,69 € with VAT -
Rotary table 110mm tilting under the milling machine - round, VU-100
Rotary dividing table tilting 110 mm circular. Horizontal fastening with a gradient of 0-90 °. Height at 0 ° is 117mm. Scale: 360 ° Grooves: 3x T-groove: 7/16 ", nuts can be purchased - see" Related goods " Centering hole MK2. equipped for storing center stones Precise positioning (rotation) with nonius control wheel - fine division - is 68mm, rotation axis 80mm 1001-011
In stock528,37 € with VAT -
Rotary table 150mm tilting under the milling machine - round, VU-150
Rotary dividing table tilting 150 mm circular. Horizontal fastening with a gradient of 0-90 °. Height at 0 ° is 140mm. Scale: 360 ° Grooves: 3x T-groove: 7/16 ", nuts can be purchased - see" Related goods " Centering hole MK2. equipped for storing center stones Precise positioning (rotation) with a nonius - casting Tilt and is 75mm, rotation axis is 90mm Base size 180x210 1001-012
In stock604,82 € with VAT
Alternatives
-
Height adjustable tailstock 130-200mm, TS-3
Headstock for lathe, divider Axis: adjustable in the height range of 130-200 mm Possibility of setting the angle of inclination of the tip: -30 to +30° Stroke of fixed tip: 28mm Base: 185x140mm Groove for attaching screws: 17mm (M16) Centering groove for stones: 16mm Suitable for rotary tables and dividers: HV-10, HV-12, CS-8, CC-8, VUT-10, VUT-12, VU-200 Order no. no.: 1001-024
In stock154,35 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!