For taps

3-jaw tap chuck Clamping (inner B cone or outer morse taper): according to the selected variant Number of jaws: 3 + square clamping Other dimensions - see description for individual variants Tightens by turning the threaded head in which there are three jaws, then the enclosed Allen key and two internal stop jaws for attaching the square shank of the tap.

Double-jaw chuck with Allen key for firm clamping of taps Clamping range: according to the selected variant Clamping cone (internal): according to the selected variant Other dimensions - see the description of the selected variant We recommend use from M12, for smaller taps use a classic 3-jaw chuck, or a three-jaw chuck with square clamping - type VTA

Tap chuck with hexagonal shank with groove for locking in bit holder Range: M3-M8 Clamping shank: classic hexagon 6.3mm Thanks to the groove it is possible to use the chuck on the shank and in the bit adapter with locking.

Tap chuck for battery drill etc. Range: M3-M8 Clamping shank: dia. 6.7mm with three driving surfaces Clamping surfaces prevent the chuck from rotating in the drill.

Hex Shank Tap Chuck with Groove for Locking in Bit Holder Range: M5-M12 Clamping shank: classic hexagon 6.3mm Thanks to the groove on the shank, the chuck can also be used in the bit adapter with locking.

Tap chuck for cordless drill etc. Range: M5-M12 Clamping shank: dia. 8.8 mm with three driving surfaces Clamping surfaces prevent the chuck from rotating in the drill.