For steel

Product count: 28
  • Machine tap M - HSSE ISO2(6H) with chip breaker, FANAR

    Machine tap M - HSSE ISO2(6H) with chip breaker, FANAR

    Machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

    from 8,72 € with VAT
  • Machine tap M - HSSE TiN ISO2(6H) with chip breaker 800X, FANAR

    Machine tap M - HSSE TiN ISO2(6H) with chip breaker 800X, FANAR

    Machine tap with straight groove and chip breaker 800X Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Steel Food stainless steel Cast iron Non-ferrous metals

    from 10,33 € with VAT
  • Machine tap M - HSSE-PM TiAlSiN ISO2(6H) with chip breaker, FANAR

    Machine tap M - HSSE-PM TiAlSiN ISO2(6H) with chip breaker, FANAR
    Recommended ✓

    Machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Refractory stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with a silicon content of> 10%, up to 400 N / mm2 8.2: Thermosets and hardened plastics

    from 12,62 € with VAT
  • Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR

    Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR

    Machine tap with straight groove and chip breaker, made of sintered steel Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips

    from 17,39 € with VAT
  • Machine tap M - HSSE-PM TS 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR

    Machine tap M - HSSE-PM TS 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR

    Machine tap with straight groove and chip breaker, made of sintered steel, type PM TS Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips

    from 13,42 € with VAT
  • Machine tap M - HSSE TiN ISO2(6H) 800X spiral (40°), FANAR

    Machine tap M - HSSE TiN ISO2(6H) 800X spiral (40°), FANAR

    Machine tap with spiral groove 800X Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 * Food grade stainless steel (does not increase the thread, maintains the prescribed tolerance)

    from 10,83 € with VAT
  • Machine tap with chip breaker, final sale

    Machine tap with chip breaker, final sale
    Clearance sale

    Machine tap (high speed) with chip breaker Straight groove, ground thread profile Diameter and incline: according to the selected variant Fitting and form: according to the chosen variant Standard: CSN 223043 Material: according to the selected variant

    from 3,82 € with VAT
  • Machine tap M - HSSE ISO3(6G) with chip breaker, FANAR

    Machine tap M - HSSE ISO3(6G) with chip breaker, FANAR

    Machine tap with straight groove and chip breaker Fitting: ISO3 / 6G - ground thread profile - free thread - under zinc Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

    from 8,41 € with VAT
  • Machine tap M - HSSE-PM TiAlSiN ISO3(6G) with chip breaker, FANAR

    Machine tap M - HSSE-PM TiAlSiN ISO3(6G) with chip breaker, FANAR

    Machine tap with straight groove and chip breaker, made of sintered steel Fitting: ISO3 / 6G - ground thread profile - free thread - under zinc Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Refractory stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with a silicon content of> 10%, up to 400 N / mm2 8.2: Thermosets and hardened plastics

    from 12,80 € with VAT
  • Machine tap M - HSSE PM S-NC TiCN ISO2(6HX) with chip breaker, FANAR

    Machine tap M - HSSE PM S-NC TiCN ISO2(6HX) with chip breaker, FANAR

    Machine tap for NC / CNC machines (high speed) with chip breaker, straight slot S-NC Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread lead: B, 4 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Ground thread profile Coating: TiCN - Titanium Carbon Nitride Usage: 1.3 : Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / mm2 3.3 : Ball and malleable cast iron up to 700N / mm2 3.4 : Ball and malleable cast iron up to 1000N / mm2 1.1: Magnetic and mild structural steel up to 400M / mm2 1.2: Structural and free-cutting steel up to 500N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloys with long chips up to 800N / mm2 4.8: Aluminum and zinc alloys with long chips up to 800N / mm2 6.3: Brass with long chips up to 700N / mm2 7.2: Aluminum alloys with silicon content up to 5%, up to 700N / mm2 7.3: Aluminum alloys with silicon content from 5% to 10%, up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

    from 11,81 € with VAT
  • Machine tap M left - HSSE ISO2(6H) with chip breaker, FANAR

    Machine tap M left - HSSE ISO2(6H) with chip breaker, FANAR

    Left machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

    from 10,99 € with VAT
  • Machine tap M - HSSE ISO2 B with chip breaker, VOLKEL

    Machine tap M - HSSE ISO2 B with chip breaker, VOLKEL

    Right machine tap, straight slot with chip breaker, for metric thread Tolerance: ISO2 / 6H Form: B (lead 3-4 threads) Material: HSSE - High speed cobalt steel Standard: DIN 371 / DIN 376 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes

    from 7,05 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

For steel