For stainless steel

Product count: 15
  • Machine tap M - HSSE TiN ISO2(6H) 800X spiral (40°), FANAR

    Machine tap M - HSSE TiN ISO2(6H) 800X spiral (40°), FANAR

    Machine tap with spiral groove 800X Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 * Food grade stainless steel (does not increase the thread, maintains the prescribed tolerance)

    from 10,83 € with VAT
  • Machine tap M - HSSE HL ISO2 INOX spiral (40°), FANAR

    Machine tap M - HSSE HL ISO2 INOX spiral (40°), FANAR

    Machine tap with spiral groove INOX HL Fitting: ISO2 (6H) Material: HSSE (High speed steel +5% Cobalt) Coating : HL - Balinit HardLube Helix angle: 40° Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage: 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.2 : Austenitic corrosion-resistant steel up to 850N/mm2 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 1100N/mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 * Food-grade corrosion-resistant steel (does not enlarge the thread, keeps the prescribed tolerance)

    from 12,48 € with VAT
  • Machine tap M - HSSE-PM TiAlSiN ISO2(6H) spiral (40°), FANAR

    Machine tap M - HSSE-PM TiAlSiN ISO2(6H) spiral (40°), FANAR
    Recommended ✓

    Machine tap with spiral groove Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Refractory stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with a silicon content of> 10%, up to 400 N / mm2 8.2: Thermosets and hardened plastics

    from 13,24 € with VAT
  • Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6H) spiral, FANAR

    Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6H) spiral, FANAR

    Machine tap with spiral groove, type PMS Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiAlSiN Helix angle: 15° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips

    from 14,83 € with VAT
  • Machine tap M - HSSE-PM TS 1400-HT TiAlSiN ISO2 spiral (15 °), FANAR

    Machine tap M - HSSE-PM TS 1400-HT TiAlSiN ISO2 spiral (15 °), FANAR

    Machine tap with spiral groove, type PM TS Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Helix angle: 15 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips

    from 13,64 € with VAT
  • Machine tap M - HSSE-PM HL MasterTap ISO2C (6HX) spiral (45°), FANAR

    Machine tap M - HSSE-PM HL MasterTap ISO2C (6HX) spiral (45°), FANAR

    Machine metric tap with spiral groove, made of sintered steel, MasterTap type Fitting: ISO2 (6HX) Thread start: C, 2 courses - see attached photo Material: HSSE-PM (High-speed steel + 5% Cobalt, production by sintering) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Helix angle: 45° Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage : Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.

    from 16,93 € with VAT
  • Machine tap M - HSSE-PM TiAlSiN ISO3(6G) spiral (40°), FANAR

    Machine tap M - HSSE-PM TiAlSiN ISO3(6G) spiral (40°), FANAR

    Machine tap with spiral groove, made of sintered steel Fitting: ISO3 / 6G - ground thread profile - free thread - under zinc Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Refractory stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with a silicon content of> 10%, up to 400 N / mm2 8.2: Thermosets and hardened plastics

    from 14,01 € with VAT
  • Machine tap M left - HSSE TiN ISO2(6H) 800X spiral (40°), FANAR

    Machine tap M left - HSSE TiN ISO2(6H) 800X spiral (40°), FANAR

    Left machine tap with spiral groove 800X Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371, DIN374, DIN376 Thread lead: C, 2 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN Helix angle: 40 ° Usage: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 * Food grade stainless steel (does not increase the thread, maintains the prescribed tolerance)

    from 15,28 € with VAT
  • Machine tap M - HSSE-PM HL MasterTap ISO2E (6HX) spiral (45°), FANAR

    Machine tap M - HSSE-PM HL MasterTap ISO2E (6HX) spiral (45°), FANAR

    Machine metric tap with spiral groove, made of sintered steel, MasterTap type Fitting: ISO2 (6HX) Thread pitch: E, i.e. 1.5-2 turns - see attached photo Material: HSSE-PM (High-speed steel + 5% Cobalt, production by sintering) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Helix angle: 45° Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage : Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.

    from 27,12 € with VAT
  • Machine tap M - HSSE PM S-NC TiCN ISO2(6HX) spiral (45°), FANAR

    Machine tap M - HSSE PM S-NC TiCN ISO2(6HX) spiral (45°), FANAR

    Machine spiral tap for NC / CNC machines (quick-cutting) in S-NC helix Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2 courses - see the attached photo Material: HSSE-PM (High-speed steel +5% Cobalt, production by sintering) Grounded thread profile Coating: TiCN - Titanium Carbon Nitride Helix angle: 45° Usage: 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 1100N/mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 3.3 : Nodular and malleable cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.1 : Magnetic and soft structural steel up to 400M/mm2 1.2 : Structural and automatic steel up to 500N/mm2 1.5 : Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.2 : Austenitic steel up to 850N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 4.4 : Copper and its alloys up to 400N/mm2 4.5 : Brass up to 600 N/mm2 4.7 : Aluminum and copper alloys with long chips up to 800N/mm2 4.8 : Aluminum and zinc alloys with long chips up to 800N/mm2 6.3 : Brass with a long chip up to 700N/mm2 7.2: Aluminum alloys with silicon content up to 5%, up to 700N/mm2 7.3 : Aluminum alloys with silicon content from 5% to 10%, up to 400N/mm2 This tap is intended for NC machines - synchronized thread cutting

    from 13,94 € with VAT
  • Machine tap M10 spiral DIN 371 B ISO2 6H HSSE PM HL - DC SWISS

    Machine tap M10 spiral DIN 371 B ISO2 6H HSSE PM HL - DC SWISS
    Clearance sale

    Z362V-3 Stainless Steel Threaded Tap: 1.5 - Basic Facing: ISO2 / 6H - Cut Thread DIN 371 (Reinforced Stopper) Material : HSSE (High-Speed ??Steel 5% Cobalt) Finish: HL (Balinit Hardlube) - High Abrasion Coating 40 ° Hex Groove Color: blue strip Application: Stainless Steel with strength up to 1100 N / mm2 - Blind hole M10

    On request
    21,51 € with VAT
  • Machine tap set M3-M12 HSSE OPTI OX spiral groove, FANAR

    Machine tap set M3-M12 HSSE OPTI OX spiral groove, FANAR

    Set of machine taps with spiral groove / set of spiral taps HSSE OX The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 ("thin shank - common from M12 upwards) Tolerance: ISO2 / 6H Material: HSSE Coating: OX - Oxidation Number of lead teeth: C (2-3 teeth) Usage - blind hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. no.: Z2-085015-0000

    In stock
    71,91 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

For stainless steel