For flat grinding 100N / cm2

Product count: 4
  • Permanent magnetic clamp PMS-M for sander, 140N/cm2

    Permanent magnetic clamp PMS-M for sander, 140N/cm2

    Permanent neodymium (PrNd) magnet Sanding plate with fine pole design. Suitable for holding small and thin workpieces Magnet size: according to the selected variant Other dimensions - see product description for individual variants Nominal clamping force 140N/cm2 Flatness: 0.005mm/100mm Pole distance: Brass (P1) 0.5mm, steel (P2) 1.5mm Accessories: Allen key and clamps for holding the magnet Usable for EDM applications, immersion in dielectric liquids. Usage: under the sander If you need a magnet for a milling machine, we recommend magnets from the PMAG series

    from 357,43 € with VAT
  • Permanent magnetic clamp, Neomicro

    Permanent magnetic clamp, Neomicro
    Recommended ✓

    Permanent neodymium magnet for precise flat grinding of very small and thin to large workpieces. The magnet is waterproof - also suitable for EDM. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Nominal clamping force: 100N/cm2 - suitable for flat grinding Pole distance: Steel 1.4mm, brass 0.5mm Clamping surface with even distribution of magnetic force to the edges!!! This magnet is ideal for precise grinding of small, thin and large parts as well as for EDM. Thanks to the waterproof design, it is possible to use a cooling liquid or immerse it in a dielectric liquid. The upper pole plate is composed of brass and steel lamellae, high stability, accuracy and clamping efficiency are guaranteed by maximum concentration of magnetic force into the surface of the workpiece. Usage: surface grinding, EDM electroerosive machining. Package includes: clamp, stop rails, set of clamps, toggle key The clamp is equipped with high-quality permanent neodymium magnets, we provide full warranty and post-warranty service for the magnets. Cat. no. : NEOC We are able to customize the magnets to order - for example: * Finish the longitudinal grooves for clamping the magnet * Finish the guide grooves for the guide stones * Cut the threads for fixing the vise * Mill T-slots for T-nuts * Edit stops * Mill beds for series production - all according to your requirements If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

    from 765,99 € with VAT
  • Permanent magnetic clamp 150x250 mm, EDM-Micro

    Permanent magnetic clamp 150x250 mm, EDM-Micro

    Permanent neodymium magnet EDM150250 - 150 x 250 mm for precise flat grinding of very small and thin to large workpieces. The magnet is waterproof - also suitable for EDM. Overall dimensions: Magnet width: 150mm Magnet length: 250mm (pole length is 200mm) Magnet height: 34.5mm Nominal clamping force: 80N /cm2 - suitable for flat grinding Pole distance: Steel 1.4mm, brass 0.5mm Clamping surface with even distribution of magnetic force up to the edges!!! Minimum workpiece size: 4x4x1 mm Magnet regrind limit: 6 mm This magnet is ideal for precise grinding of small, thin and large parts as well as for EDM. Thanks to the waterproof design, it is possible to use a cooling liquid or immerse it in a dielectric liquid. The upper pole plate is composed of brass and steel lamellae, high stability, accuracy and clamping efficiency are guaranteed by maximum concentration of magnetic force into the surface of the workpiece. Usage: surface grinding, EDM electroerosive machining. Package includes: clamp, stop rails, set of clamps, toggle key The clamp is equipped with quality permanent neodymium magnets, we provide full warranty and post-warranty service for magnets. Cat. no. : EDM150250 If you are not sure about the choice - you do not know which magnet is suitable for your work, contact us, we will be happy to help!

    In stock
    780,37 € with VAT
  • Permanent magnetic clamp 150x300 mm, EDM-Micro

    Permanent magnetic clamp 150x300 mm, EDM-Micro

    Permanent neodymium magnet EDM150300 - 150 x 300 mm for precise flat grinding of very small and thin to large workpieces. The magnet is waterproof - also suitable for EDM. Overall dimensions: Width of the magnet: 150mm Length of the magnet: 300mm (length of the pole is 250mm) Height of the magnet: 34.5mm Nominal clamping force: 80N /cm2 - suitable for flat grinding Pole distance: Steel 1.4mm, brass 0.5mm Clamping surface with even distribution of magnetic force up to the edges!!! Minimum workpiece size: 4x4x1 mm Magnet regrind limit: 6 mm This magnet is ideal for precise grinding of small, thin and large parts as well as for EDM. Thanks to the waterproof design, it is possible to use a cooling liquid or immerse it in a dielectric liquid. The upper pole plate is composed of brass and steel lamellae, high stability, accuracy and clamping efficiency are guaranteed by maximum concentration of magnetic force into the surface of the workpiece. Usage: surface grinding, EDM electroerosive machining. Package includes: clamp, stop rails, set of clamps, toggle key The clamp is equipped with quality permanent neodymium magnets, we provide full warranty and post-warranty service for magnets. Cat. no. : EDM150300 If you are not sure about the choice - you do not know which magnet is suitable for your work, contact us, we will be happy to help!

    In stock
    829,14 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

For flat grinding 100N / cm2