Drills

Product count: 6
  • Professional pneumatic drill 1-10mm GP-824TD, GISON

    Professional pneumatic drill 1-10mm GP-824TD, GISON

    Professional air drill with all-metal quick-release chuck, with rear air outlet and stepless speed control Clamping range: 1.0 to 10 mm Clamping wall Â!Vit: 3/8 "x 24 UNF Speed: 3.500 rpm, adjustable Total length: 243mm Max Pressure: 6,2 bar(90PSI) Air consumption: 0.56 m3 / min Inlet screw connection: 1/4 " Min. air hose diameter: 9.5mm Noise: 87dBA Vibration:

    On request
    97,50 € with VAT
  • Professional pneumatic drill 1.5-13mm GP-824TD, GISON

    Professional pneumatic drill 1.5-13mm GP-824TD, GISON

    Professional air drill with all-metal quick-release chuck, with rear air outlet and continuous speed control Clamping range: 1.5 to 13 mm Clamping thread: 1/2" x 20 UNF Speed: 3,500 rpm, adjustable Total length: 243mm Maximum pressure: 6.2 bar (90PSI) Air consumption: 0.56 m3/min Inlet screw connection: 1/4" Min. air hose diameter: 9.5mm Noise level: 87dBA Vibration:

    In stock
    110,88 € with VAT
  • Spot weld drill GP-921A, GISON

    Spot weld drill GP-921A, GISON

    Professional pneumatic milling machine / drill / drill for spot welds, suitable for example. for drilling spot welds and other milling work - high power, lower air consumption and noise Speed: 1400 rpm Drill / cutter for: 8mm Air consumption: 0.4 m3 / min Maximum pressure: 6.2 bar Total length: 310mm Inlet fitting: 1/4 " Min. Air hose diameter: 6.5mm Noise: 77dBA Vibration:

    On request
    221,20 € with VAT
  • Spare 8mm drill for GP-921C, GISON

    Spare 8mm drill for GP-921C, GISON

    Replacement drill for spot weld drill GP-921C Diameter: 8mm

    In stock
    9,43 € with VAT
  • Set of rotor blades(4pcs) for GP-921C, GISON

    Set of rotor blades(4pcs) for GP-921C, GISON

    Pertinax drive blades(4pcs) for GP-921C Length: 38mm Height: 9,0mm Thickness: 2mm The slats are part of the drive mechanism of the pneumatic tool. The slats wear out normally over time, or if the drive mechanism is not sufficiently lubricated with air without impurities, their faster abrasion occurs. (using a dry tool without an eraser) and needs to be replaced. This is a consumable item.

    In stock
    8,43 € with VAT
  • Sheet metal cutter / cutter for drill

    Sheet metal cutter / cutter for drill
    * New item *

    Shredder - simple sheet metal shredder Shears for shredding sheet metal, which are equipped with a rotating head. Used for use with a hand drill, cordless drill or pneumatic drill Use according to the enclosed video Max.thickness of steel sheet 1,8mm , stainless steel sheet 1.2mm

    In stock
    36,49 € with VAT

Drills