Drill chucks

Clamp - holder for Karnasch core drills, screw type Morse taper: according to the selected variant For clamping shanks: according to the selected variant The drill is clamped in the head over screws. Without internal cooling

Clamp - holder for Karnasch core drills, screw type with internal cooling Morse cone: according to the selected variant For clamping shanks: according to the selected variant Length of the clamping device: according to the selected variant The drill is clamped in the head via screws. With internal cooling

Quick-release chuck - holder for Karnasch core drills, quick-change design Morse taper: according to the selected variant Just click the drill into the chuck. For clamping shanks: 3/4 "(resp. 19.05mm) Without internal cooling

Quick-release chuck - holder for Karnasch core drills, quick-change design with internal cooling Morse taper: according to the selected variant Just click the drill into the chuck. For clamping shanks: 3/4 "(resp. 19.05mm) With internal cooling

Clamping collet chuck with Morse taper shank Clamping cone: according to the selected variant Head size / clamping range: according to the selected variant Note: * Size 16mm has a clamping range: 3 - 10 mm * Size 28mm has a clamping range: 6 - 20 mm The key is not included in the package. Standard: ČSN 24 1491 Usage: Drill or lathe - for clamping drills and other tools with a cylindrical shank This is an old Czech design. We recommend switching to ER collets and ER collets.

Carrier spring for core drills Size: 13x135mm Suitable for use with drive heads: 20.1293, 20.1286, 20.1310 , 20.1844 -

Adapter for weldon 3/4 "- for clamping classic drill chucks Application: For core drills with 3/4"(19,05mm) weldon chucks Drill chucks can be found - see related products

Thanks to this reduction, you can clamp larger drill diameters on a magnetic drill with weldon clamping 19mm(3/4 ") - with 32mm clamping 281 1/4") The reduction has a 7.98mm bore

Extension for drilling with core drills in greater depth Use: For core drills with 3/4" (19.05mm) weldon clamping ( or Nitto clamping) Drill chucks can be found - see related products

Adapter Weldon. Outer dimension 32mm, inner dimension 19mm

Overall Length: 170mm Pin Diameter: 7,5mm For Collet Clamp - Small Yoke: 44mm 220731/22 0731

Precision cast iron stand for hand-held electric drill, precise, rigid and stable guide, with swivel head for drilling at an angle of 0-90 ° For drills with diameter: 43mm / 39mm / 25mm The drill is mounted over the enclosed plastic inserts Lever travel length: 60mm Distance between base and clamping hole: 295mm Distance between drilling axis and column: 124mm Total stand height: 400mm Diameter column: 25mm Clamping holes of the stand: 8mm Distance of clamping holes: 140mm Dimensions of the base: 156x156mm T-slot in the base: 3 / 8 "(9,5mm), we are able to make clamping stones to order. Hex wrenches are included. Vise we recommend size max. 80mm - see related products section Ideal for precision drilling of wood, metal and other materials The drilling depth scale has an adjustable insole.