Dividers and turntables

Product count: 26
  • Divider for indirect division with tailstock, type BS, VERTEX

    Divider for indirect division with tailstock, type BS, VERTEX

    Universal dividing head, dividing device Axis height: according to the selected variant Chuck (YES/NO): according to the selected variant Division possible in vertical and horizontal position Possibility of continuous folding: -10 to +90° Hardened and ground screw Precision tapered roller bearings Gear ratio 40 : 1 The included dividing discs have the following number of holes: 15 / 16 / 17 / 18 / 19 / 20 / 21 / 23 / 27 / 29 / 31 / 33 / 37 / 39 / 41 / 43 / 47 / 49 For the use of a fixed point with a driver, possibly a flange can be used to fix a universal chuck or a face plate. The support horse is adjustable in a horizontal plane, the possibility of tilting Scope of delivery: Horse Three dividing discs Centering tip

    from 594,46 € with VAT
  • Rotary table under the circular milling machine, type HV, VERTEX

    Rotary table under the circular milling machine, type HV, VERTEX

    Quality rotary dividing table - dividing table for milling machine - circular table for three-jaw chuck Horizontal and vertical clamping Diameter of the table: according to the selected variant There is a scale of 360° around the circumference of the turntable Other dimensions - see product description for individual variants, or the attached catalog sheet Nonius : 1 turn = turn by 4° 1 division = 1´ (one minute of degree) Maximum resolution: 20´´ (20 seconds) The turntable and vernier can be locked in the selected position. The lower landing surface is ground, equipped for storing centering stones. Vertex table grooves are suitable for clamping 3-jaw chucks, which is ideal for machining rotary parts. In the same way, four-jaw chucks can be easily clamped, which are suitable for machining squares and polygons (which is less common), but at the same time, they have lower accuracy (centering) when machining rotary parts - precisely because of clamping by 4 jaws. For this reason, we recommend always using a 3-jaw chuck - if possible. On the market, you can find similar less precise tables with four grooves, but these are not ideal for clamping 3-jaw and 4-jaw chucks - clamping a chuck that has 3 clamping holes on 4 grooves is complicated - it is necessary to find / make an intermediate flange.

    from 276,44 € with VAT
  • Rotary dividing circular table with chuck for milling machine, type CS, VERTEX

    Rotary dividing circular table with chuck for milling machine, type CS, VERTEX

    Professional massive cast iron rotary circular dividing table - dividing table with chuck for milling machine Possibility of dividing continuously via the screw and vernier, after its disconnection (lever) it is also possible to divide with automatic locking by 15° (24 positions) Diameter of the chuck: according to the selected variant The chuck is rotatable by 360° Other dimensions - see the attached PDF catalog sheet or product description for individual variants There are no additional jaws for the chuck. The package also includes discs for dividing into 2, 3, 4, 6, 8 and 12 positions (or 180°, 120°, 90°, 60°, 45°, 30°) Quick setup, simple operation. Nonius : 1 turn = turn by 4° 1 division = 1´ (one minute of degree) Maximum resolution: 20´´ (20 seconds) The turntable and vernier can be locked in the selected position. The lower landing surface is ground, equipped for storing centering stones.

    from 919,37 € with VAT
  • Rotary tilting table under the milling machine - circular, type VU, VERTEX

    Rotary tilting table under the milling machine - circular, type VU, VERTEX

    Rotary dividing table tilting under the milling machine Turntable diameter: according to the selected variant Other dimensions - see product description for individual variants, or the attached catalog sheet Horizontal fixing with the possibility of inclination 0-90°. Scale: 360° The lower landing surface is ground, equipped for storing centering stones. Precise positioning (shooting) with a control wheel with vernier - fine division. It is possible to purchase dividing discs with a ruler. The turntable and vernier can be locked in the selected position. It is fastened to the worktop with the attached clamps (4 pcs).

    from 527,74 € with VAT
  • Dividing table with universal chuck, type VSI, VERTEX

    Dividing table with universal chuck, type VSI, VERTEX

    Dividing device - the dividing device is suitable for use with a column drill or a milling machine Chuck size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants With a flat lever, it is possible to divide with a lock of 15° The table is locked in a given position with a round lever.

    from 303,83 € with VAT
  • Simple dividing table with universal 3-jaw chuck, type VSR, VERTEX

    Simple dividing table with universal 3-jaw chuck, type VSR, VERTEX

    Parting device with universal 3-jaw 360° chuck Diameter of the chuck: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants The package comes with inner and outer jaws

    from 434,66 € with VAT
  • Simple dividing table with universal 4-jaw chuck, type VSR, VERTEX

    Simple dividing table with universal 4-jaw chuck, type VSR, VERTEX

    Parting device with universal 4-jaw chuck 360° Diameter of the chuck: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants The package comes with inner and outer jaws

    from 438,66 € with VAT
  • Simple dividing table with universal chuck, type CC, VERTEX

    Simple dividing table with universal chuck, type CC, VERTEX

    Massive dividing device with universal chuck with 15° locking (24 positions), suitable for large and long workpieces Diameter of the chuck: according to the selected variant The chuck is rotatable by 360° Other dimensions - see the attached PDF catalog sheet or product description for individual variants There are no additional jaws for the chuck. The package also includes discs for dividing into 2, 3, 4, 6, 8 and 12 positions (or 180°, 120°, 90°, 60°, 45°, 30°) Quick setup, simple operation.

    from 650,86 € with VAT
  • Indirect dividing device for rotary and tilting tables, type DP

    Indirect dividing device for rotary and tilting tables, type DP

    Additional dividing device (dividing discs) serves for convenient and precise angular division For rotary tables and dividers marked: according to the selected variant More information - see product description for individual variants Precise setting of the selected step using a knife ruler and locking pin.

    from 85,43 € with VAT
  • Height-adjustable tailstock, type TS, VERTEX

    Height-adjustable tailstock, type TS, VERTEX

    Simple tailstock for lathe, divider The axis of the tip can be adjusted in the height range: according to the selected variant Other dimensions - see product description for individual variants Possibility of setting the angle of inclination of the tip: -30 to +30°

    from 147,16 € with VAT
  • FLT-103 flange for HV-4 and VU-100 rotary table

    FLT-103 flange for HV-4 and VU-100 rotary table

    Flange for rotary tables HV-4 and VU-100, for clamping universal slides dia. 80mm Flange diameter: 90mm Mounting for glass: 60mm Other dimensions - see attached photo Suitable  © for clamping VSC-3F chucks. After preparation suitable for clamping IUG 80/3 M2 chucks(twisting of fittings, drilling of holes).

    In stock
    75,96 € with VAT
  • FLT-104 flange for rotary table HV-4, HV-6, VU-100, VU-150 and VUT-6

    FLT-104 flange for rotary table HV-4, HV-6, VU-100, VU-150 and VUT-6

    Flange for rotary tables HV-4, HV-6, VU-100, VU-150 and VUT-6, for clamping universal slides dia. 100mm Flange diameter: 113mm Mounting for glass: 80mm Other dimensions - see attached photo Suitable  © for clamping VSC-4F chucks. After preparation, suitable for clamping chucks of the KUS 100/3 M3 or IUG 100/3 M2 type(fitting twisting, drilling holes).

    In stock
    65,65 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Dividers and turntables