CZTOOL
-
Machine tap M - 4H HSSE CSN 223044 spiral, CZTOOL
Machine tap (high speed) spiral groove / in helix with ground thread profile Fitting: ISO1 / 4H - ground thread profile (tight thread - eg aerospace industry, etc.) Material: HSSE (High speed steel + 5% Cobalt) Standard: CSN 22 3044 / PN 8/3044 (up to M10 reinforced shank, from M12 classic shank) These taps can also be supplied coated (TiN) on request.
from 11,47 € with VAT -
Machine tap M - 6H HSSE DIN371 spiral, CZTOOL
Machine tap( high speed) helical groove / in helix with ground thread profile Fitting: ISO2 / 6H - ground thread profile, standard tolerance Material: HSSE( High speed steel 5% Cobalt) Standard: DIN371 / DIN376 These taps can be supplied on request coated with 28TiN)
from 10,62 € with VAT -
Countersink 90 ° 3-fl. extended HSSE DIN335C XL , CZTOOL
Three-edged taper countersink with long clamping shank Max. diameter: according to the selected variant Number of edges: 3 Clamping shank: see product description for selected variant Blade angle: 90st. Material: HSSE / HSSCo5 - High speed steel + 5% Co5 Standard: DIN 335 C XL
from 9,35 € with VAT -
Countersink 90° HSS with hexagonal shank - bit, CZTOOL
3bř. taper countersink bit for cordless drill Max. diameter: according to the selected variant Number of cutting edges: see product description for the selected variant Clamping shank: hexagon 1/4 "(6.35mm) Blade angle: 90st. Material: HSS - high speed steel
from 5,05 € with VAT -
Countersink 90° HSS with hex shank - bit with quick clamping , CZTOOL
3bř. taper countersink bit for cordless drill Max. diameter: according to the selected variant Number of cutting edges: see product description for the selected variant Clamping shank: hexagonal 1/4 "(6.35mm) with locking for quick release Blade angle: 90st. Material: HSS - high speed steel
from 5,13 € with VAT -
Hand tap G - HSSE OX VA DIN5157 , CZTOOL
Hand set tap G for pipe thread Climb: basic Fitting: A Material: HSSE VA - cobalt high-speed steel - stainless steel design Coating: OX - oxidation Standard: DIN5157 (replacement for ČSN 22 3012 / CSN 223012) Usage: Structural steels up to 800MPa Free-cutting steels up to 750MPa Tool steels up to 900MPa Cast steel 500-700 MPa Malleable cast iron 450-700 MPa Stainless and heat-resistant steels up to 1100MPa Cast steel 700-900Mpa Bronze, brass, zinc, copper and other light metals
from 35,72 € with VAT -
Countersink 60 ° 3-fl. HSS/E DIN334C , CZTOOL
Three-edged conical countersink Max. diameter: according to the selected variant Number of edges: 3 Clamping shank: see product description for selected variant Blade angle: 60st. Material: HSS or HSSE (HSSE = HSSCo5) - according to the selected variant Standard: DIN 334 C
from 6,76 € with VAT -
Countersink 3-fl. 80° HSSE, CZTOOL
Three-point conical countersink Max. diameter: according to the selected variant Number of blades: 3 Clamping shank: see product description for the selected variant Blade angle: 80°. Material: HSSE - cobalt high-speed steel (HSSCo5) Standard: no standard, replacement for DIN335 (* geometry is the same, for some diameters the length of the clamping shank is different)
from 14,29 € with VAT -
Countersink 100 ° 3-fl. HSSE , CZTOOL
Three-edged conical countersink Max. diameter: according to the selected variant Number of edges: 3 Clamping shank: see product description for selected variant Blade angle: 100st. Material: HSSE - cobalt high speed steel (HSSCo5) Standard: without standard, replacement for DIN335 (* geometry is the same, for some diameters the length of the clamping shank is different)
from 9,34 € with VAT
