Homepage Metalworking tools Milling Collet chucks and collets

Collet chucks and collets

Product count: 203
  • Sealed ER32 collet with cooling channels , DIN6499C / 470EC

    Sealed ER32 collet with cooling channels , DIN6499C / 470EC

    Precision collet ER 32 with cooling channels - for drills and cutters without internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470EC Usage : For tools (drills and cutters, countersinks, etc.) without internal cooling Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    26,97 € with VAT
  • Tapping ER32 collet with square drive , DIN6499A

    Tapping ER32 collet with square drive , DIN6499A

    Clamping collet with internal square ER 32 / GER 32 / GER32 series for taps with internal cooling Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A, ISO 15488 A Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    23,87 € with VAT
  • Sealed ER32 tapping collet with square drive , DIN6499A

    Sealed ER32 tapping collet with square drive , DIN6499A

    Sealed ER 32 / GER 32 / GER32 series inner square collet for machine taps with internal cooling Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A + DIN 6499 B, ISO 15488 A + ISO 15488 B Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    from 10,30 € with VAT
  • JAL clamping sleeve with ISO taper , ČSN 241490

    JAL clamping sleeve with ISO taper , ČSN 241490

    Clamping collet sleeve with ISO taper shank Clamping cone: according to the selected variant Head size / clamping range: according to the selected variant Note : * Size 16mm has a clamping range: 3 - 10 mm * Size 28mm has a clamping range: 6 - 20 mm Standard: ČSN 24 1490 Usage : Milling tool - for clamping milling cutters, drills and other tools with a cylindrical shank It is an old Czech design. We recommend switching to collet ER clamps and ER collets.

    from 53,99 € with VAT
  • JAL clamping holder with morse taper , ČSN 241492

    JAL clamping holder with morse taper , ČSN 241492

    Clamping collet sleeve with Morse taper shank Clamping cone: according to the selected variant Head size / clamping range: according to the selected variant Note : * Size 16mm has a clamping range: 3 - 10 mm * Size 28mm has a clamping range: 6 - 20 mm The key is not included in the package. Standard: ČSN 24 1492 Usage : Milling tool - for clamping milling cutters, drills and other tools with a cylindrical shank It is an old Czech design. We recommend switching to collet ER clamps and ER collets.

    from 53,32 € with VAT
  • Precision ER40 collet , DIN6499B / 472E

    Precision ER40 collet , DIN6499B / 472E

    Clamping collet series: ER 40 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 472E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 40mm Length: 46mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

    from 9,57 € with VAT
  • Sealed ER40 collet , DIN6499C / 472EA

    Sealed ER40 collet , DIN6499C / 472EA

    Precision collet ER 40 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 472EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 40mm Length: 46mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    24,43 € with VAT
  • Precision ER50 collet , DIN6499B / 477E

    Precision ER50 collet , DIN6499B / 477E

    Clamping collet series: ER 50 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.020mm up to a diameter of 30mm (including) Clamping accuracy: 0.030mm over a diameter of 30mm Standard: DIN 6499B / 477E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 50mm Length: 60mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

    from 20,17 € with VAT
  • Hook wrench for collet ER holder

    Hook wrench for collet ER holder

    Hook wrench for collet clamp Size: according to the selected variant Usage: For loosening and tightening ER nuts of collet clamps

    9,79 € with VAT
  • Socket wrench for ER collet holder

    Socket wrench for ER collet holder

    Wrench for collet clamp Size: according to the selected variant Usage: For more efficient loosening and tightening of ER nuts of collet clamps Suitable for nuts of type: UM / T2

    from 9,44 € with VAT
  • Mini socket wrench for collet ER holder , type M

    Mini socket wrench for collet ER holder , type M

    Mini socket wrench for collet clamp Wrench for clamping nuts: according to the selected variant Usage: For loosening and tightening ER nuts of collet clamps type M (Mini)

    from 5,97 € with VAT
  • Nut wrench for ER collet holder

    Nut wrench for ER collet holder

    Wrench for collet chuck, for collet chuck with hex nut Size: according to the selected variant Usage: For loosening and tightening hexagonal ER nuts of collet clamps Using a classic open key will damage the nut! We recommend using this exact key.

    5,97 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Collet chucks and collets