Homepage Clamping tools

Clamping tools

Product count: 1019
  • Live center with Morse taper, 3 bearings

    Live center with Morse taper, 3 bearings

    Morse clamping cone Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

    from 22,37 € with VAT
  • Nut for T-slot, ČSN 021529 / DIN 508

    Nut for T-slot, ČSN 021529 / DIN 508

    T-slot nut Dimension of the T-slot: according to the selected variant (dimension "A" - see attached photo) Thread size: according to the selected variant Dimensions of the nut: - see product description for individual variants Standard: ČSN 02 1529 / CSN021529 or DIN508 Material: Structural steel 12050 (C45), heat treated - unless otherwise specified for a specific dimension

    from 1,89 € with VAT
  • Key type drill chuck with taper clamping, ČSN 241320

    Key type drill chuck with taper clamping, ČSN 241320

    Drilling head with handle - classic design Clamping range: according to the selected variant Clamping cone: according to the selected variant Clamping pins for these chucks can be found in related products. Standard: ČSN 241320 / CSN 24 1320

    from 2,99 € with VAT
  • Key type drill chuck HEAVY-DUTY with taper clamping , ČSN 241320

    Key type drill chuck HEAVY-DUTY with taper clamping , ČSN 241320
    Recommended ✓

    Drilling head with handle - industrial design Clamping range: according to the selected variant Clamping cone: according to the selected variant Ground jaws, very precise drill clamping Accuracy / throw: up to 0.2mm , robust, high-quality chuck design Clamping pins for these chucks can be found in related products. Standard: ČSN 241320 / CSN 24 1320

    from 8,69 € with VAT
  • Key type precision drill chuck with taper clamping , accuracy 0.15 mm

    Key type precision drill chuck with taper clamping , accuracy 0.15 mm
    Recommended ✓

    Přesná vrtací hlavička s kličkou s přesně broušenými čelistmi - profesionální provedení Upínací rozsah : dle zvolené varianty Upínací kužel : dle zvolené varianty Přesně broušené čelisti do špičky , velmi přesné upnutí vrtáku Ozubení je extra přesné , je taženo za studena. Kužel, klicka a dira na kličku jsou kalené. Přesnost / házivost : do 0,15mm , robustní, velmi kvalitní provedení sklíčidla , (běžná sklíčidla mají přesnost 0,35mm) Použití : Strojní stolní a sloupové vrtačky Upínací trny per tato sklíčidla najdete v souvisejících produktech. Norma : ČSN 241320 / CSN 24 1320

    from 10,51 € with VAT
  • Key type drill chuck with thread clamping , ČSN 241320

    Key type drill chuck with thread clamping , ČSN 241320

    Drilling head with handle - classic design Clamping range: according to the selected variant Clamping thread: according to the selected variant Clamping pins for these chucks can be found in related products. Application: Hand drills with thread clamping (Narex, Dewalt, Makita, Extol and other drills) Standard: ČSN 241320 / CSN 24 1320 If you are changing the chuck, look at the body of the existing chuck, the type of thread should be stamped on the body. If you are unsure, measure the thread diameter and respond.

    from 2,67 € with VAT
  • Handle for drill chuck ČSN 241321

    Handle for drill chuck ČSN 241321

    Handle for drill chuck - for classic chucks marked ČSN241320 - including HEAVY-DUTY series Dimensions: Pin diameter: according to the selected variant Number of teeth: see description of selected variant Min. collar diameter: see description of the selected variant Max. collar diameter: according to the selected variant For chucks marked ČSN 241321 - see related products Before ordering the handle, compare the parameters with your used handle or chuck!

    from 1,68 € with VAT
  • Keyless drill chuck with taper clamping , Professional

    Keyless drill chuck with taper clamping , Professional

    Quick-clamping drill head without loop self-locking, quick-clamping, keyless, type SOLID Cut jaws, professional quality. Clamping range: according to the selected variant Clamping cone: according to the selected variant Trn is not part of the package, to buy - see related products Main use: For stand and column drills Clamping accuracy / throw - you will find in the description of the selected variant

    from 21,44 € with VAT
  • Keyless drill chuck with thread clamping , CSN 241320

    Keyless drill chuck with thread clamping , CSN 241320

    Quick-clamping drill head without loop self-locking, quick-clamping, keyless, type SOLID Cut jaws, professional quality. Clamping range: according to the selected variant Clamping thread: according to the selected variant Trn is not part of the package, to buy - see related products Main use: For stand and column drills Clamping accuracy / throw - you will find in the description of the selected variant

    18,94 € with VAT
  • Drill chuck mandrel with tang CSN 241329 / DIN238

    Drill chuck mandrel with tang CSN 241329 / DIN238

    Taper drill mandrel for drill chuck (mandrel to chuck), type with carrier Spindle taper (morse): according to the selected variant Cone for the header: according to the selected variant Standard: ČSN 241329 / CSN 24 1329

    from 4,07 € with VAT
  • Drill chuck arbour with tang and thread ČSN 241329

    Drill chuck arbour with tang and thread ČSN 241329

    Taper thread drill mandrel for drill chuck (mandrel to chuck), type with carrier Spindle taper (morse): according to the selected variant Thread for the header: according to the selected variant Standard: replacement ČSN 241329 / CSN 24 1329 Use: for clamping a drill chuck, it can also be used to clamp something else.

    from 6,34 € with VAT
  • Milling arbor for drill chuck with taper

    Milling arbor for drill chuck with taper

    Taper milling mandrel for drill chuck (mandrel to chuck), female thread type Spindle taper (morse): according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK1 = thread M8 MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 Cone for the header: according to the selected variant Clamping of the drill chuck directly into the milling spindle, ie for milling machines with a Morse spindle taper.

    from 5,94 € with VAT

Clamping tools