Homepage Clamping tools

Clamping tools

Product count: 1019
  • Milling arbor for drill chuck with thread

    Milling arbor for drill chuck with thread

    Taper milling mandrel for drill chuck (mandrel to chuck), type with internal thread in Morse taper and external thread for chuck clamping Spindle taper (morse): according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK1 = thread M8 MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 Thread for the header: according to the selected variant Clamping of a drill chuck directly into the milling spindle, ie for milling machines with a Morse spindle taper. Use: for clamping a drill chuck, it can also be used to clamp something else.

    from 7,78 € with VAT
  • Keyless drill chuck with morse taper

    Keyless drill chuck with morse taper
    Recommended ✓

    Self-locking chuck, precision quick-release head, type SOLID Clamping range: according to the selected variant Clamping cone: morse taper - size according to the selected variant Tightening / loosening: hook wrench with tooth The key is part of the package. Accuracy / throw:

    from 40,37 € with VAT
    up to -20%
  • Keyless drill chuck with morse taper, VERTEX

    Keyless drill chuck with morse taper, VERTEX

    Self-locking chuck, precision quick-release head, type SOLID Clamping range: according to the selected variant Clamping cone: morse taper - size according to the selected variant Tightening / loosening: hook wrench with tooth The key is part of the package. Accuracy / throw - see the description of the selected variant Application: drilling machine, lathe, milling machine

    from 78,34 € with VAT
  • Nut for T-slot , bevelled DIN510

    Nut for T-slot , bevelled DIN510

    T-slot beveled nut, beveled - rhombus For deployment from above Dimension of the T-slot: according to the selected variant (dimension "A" - see attached photo) Thread size: according to the selected variant Dimension of the nut: see product description for individual variants Due to the reduced bearing surface in the T-groove, the load capacity is lower than for comparable sizes DIN 508 / ČSN 021529

    from 1,98 € with VAT
  • Key for precision drill chuck - type 0.15 mm

    Key for precision drill chuck - type 0.15 mm

    Handle for precision drill chuck - marked 0.15mm Dimensions: Pin diameter: according to the selected variant Number of teeth: see description of selected variant Min. gear diameter: see description of selected variant Max. gear diameter: according to the selected variant Handles are suitable for chucks - see related products Before ordering the handle, compare the parameters with your used handle or chuck!

    from 2,19 € with VAT
  • Live center 60° - CSN 243324

    Live center 60° - CSN 243324

    Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 60 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.

    from 79,55 € with VAT
  • Live center with offset tip, 3 bearings

    Live center with offset tip, 3 bearings

    Morse clamping cone with extended offset tip Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

    from 24,91 € with VAT
  • Extended live center

    Extended live center

    Morse clamping cone with extended tip Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

    from 39,18 € with VAT
  • Carbide-tipped live center

    Carbide-tipped live center

    Morse clamping cone with carbide tip Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

    from 36,34 € with VAT
  • Self-tightening PROFI drill chuck, runout up to 0.06mm

    Self-tightening PROFI drill chuck, runout up to 0.06mm

    Precise quick-clamping drill head without handle, self-locking, quick-clamping, without handle, type SOLID Guaranteed accuracy (throwability) up to 0.06mm - checked in our workshop Ground jaws, professional quality. For clamping the drill: according to the selected variant Clamping cone: according to the selected variant Other dimensions of the chuck - see product description for individual variants The mandrel is not part of the package, we can deliver it in MK 1, MK2, MK3, MK4 versions Main use : For stand and column drills

    from 31,36 € with VAT
  • Keyless drill chuck DIN2080

    Keyless drill chuck DIN2080

    Self-locking chuck - precise quick-clamping head, type SOLID Clamping range: according to the selected variant Clamping cone: according to the selected variant Other dimensions - see product description for individual variants Standard: DIN2080, i.e. manual tool change Max. runout: 0.05mm

    from 59,88 € with VAT
  • Keyless drill chuck DIN2080 with hook wrench, VERTEX

    Keyless drill chuck DIN2080 with hook wrench, VERTEX

    Self-locking chuck, precision quick-release head, type SOLID Clamping range: according to the selected variant Clamping cone: steep ISO cone - size according to the selected variant Tightening / loosening: hook wrench with tooth The key does not have to be part of the package - see photo or description of the selected variant Standard: DIN2080 - manual tool change Accuracy / throw - see the description of the selected variant Application: classic milling machines with manual tool change

    from 132,79 € with VAT

Clamping tools