Clamping accessories

T-slot nut Dimension of the T-slot: according to the selected variant (dimension "A" - see attached photo) Thread size: according to the selected variant Dimensions of the nut: - see product description for individual variants Standard: ČSN 02 1529 / CSN021529 or DIN508 Material: Structural steel 12050 (C45), heat treated - unless otherwise specified for a specific dimension

T-slot beveled nut, beveled - rhombus For deployment from above Dimension of the T-slot: according to the selected variant (dimension "A" - see attached photo) Thread size: according to the selected variant Dimension of the nut: see product description for individual variants Due to the reduced bearing surface in the T-groove, the load capacity is lower than for comparable sizes DIN 508 / ČSN 021529

Clamping screw for T slot Thread: according to the selected variant Length L (without square): depending on the selected variant Other dimensions - see product description for individual variants Standard: ČSN 02 1124 Screw strength 10.9, blackened (unless otherwise stated)

Screw double-sided thread - pin Size: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Strength screw, HRC 27° Suitable for machine use for clamps/bridges/nuts, not suitable for use in auto-moto

Pair of unused prism cubes with 1 notch from Vertex ( V-cube backing without yoke / prismatic cube ) Dimensions (dimensions according to the attached photo): L: according to the selected variant W : according to the selected variant H : according to the selected variant Other dimensions - see the attached table The accuracy of the flatness of the prismatic grooves for a pair: up to 0.05mm (with a max. distance of the cubes 300mm apart) The price is for a pair - i.e. for 2 cubes

The driving heart is used for turning the workpiece when clamped between the tips For diameters: according to the selected variant Suitable for grinding or turning between points The drifting of the object is done via an eccentric lever. The front is engaged by a spring, the eccentric lever rests against a pin stop on the lathe flange - see attached catalog sheet.

V-cube with yoke - 1pc, control drawing prism cube with yoke Prism length: according to the selected variant Cube width: according to the selected variant Dice height: according to the selected variant Clamping range: see product description for individual variants DIN876/1

Clamping screw - pin - self-tapping screw, with asymmetric thread length Size: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: hardened steel * M6-M12 for strength 10.9 * M14-M42 for strength 8.8. Threads are rolled, surface treatment - blackening Made according to standard: DIN6379

Tilting control prism V-cube / prismatic adjustable angle Prism width x cube height x cube length: according to the selected variant Locking at the selected angle, setting according to the minute scale The angle setting range is 90°.

Clamp for clamping parts, vices, fixtures, etc. For screw(s): according to the selected variant Total length: according to the selected variant Dimensions: see attached catalog sheet For use with a milling machine, drill, etc. Hardness: HRC 37

Adjustable clamp with thread for clamping parts, vise, fixtures, etc. Groove width: according to the selected variant Total length: according to the selected variant Thread: according to the selected variant Dimensions: see product description for individual variants Standard: ČSN 243651 B / replacement for DIN 6316 Strength: 8.8, blackened

Support screw for adjustable clamp ČSN 243651B Thread: according to the selected variant Other dimensions - see product description for individual variants Standard: ČSN 243651 C Strength: 8.8, blackened