Homepage Brand overview Česká zakázková výroba

Česká zakázková výroba

Product count: 5
  • Medium chain disconnector

    Medium chain disconnector

    Chain Breaker Hexagon Sizes 22mm Hexagon Socket Length: 45mm Pin Diameter: 4mm

    On request
    15,77 € with VAT
  • Preparation for advance measurement - Czech production

    Preparation for advance measurement - Czech production

    Thread 14x1,25mm - common candle. - Advance Adjustment: 1. Unscrew the spark plug and screw in the timer. 2. Slowly rotate the crankshaft until the piston is in the upper dead center - at this point, the stick of the meter is fully extended. 3. Secure the rod in this position with the side screw - turn the crankshaft about 1/3 turn back (counterclockwise). 4. Set the lead on the advance meter. This is done by screwing the top of the meter. 1 revolution is 1mm, the finer values ??are indicated on the body of the meter. Gently rotate the crankcase in the direction of the engine until the piston reaches the meter bar. 5.Set the breaker (the circuit breaker board) to the position where the contacts are disconnected. 6. The start of the disconnection is determined by the connected bulb, ohmmeter or thin paper. The gauge is suitable for adjusting the range of motorcycles

    In stock
    17,21 € with VAT
  • Preparation for measuring advance with an anemometer

    Preparation for measuring advance with an anemometer

    Thread 14x1,25mm - common candle. Body length without thread: 60mm Included are two bars with a diameter of 5mm and lengths: 50 and 60mm. After assembly of the sticks into the adapter there is a stick overlap of 32mm and 42mm (including thread length) This adapter is fitted with an 8mm stem (8H7 hole)

    In stock
    8,91 € with VAT