Homepage Brand overview Česká výroba

Česká výroba

Product count: 2956
  • Passivated HSS drill for metal, ČSN 221121

    Passivated HSS drill for metal, ČSN 221121

    Right-handed blackened passivated twist drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Drilling depth: 5xD Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS - High speed steel Standard: CSN 22 1121, DIN338RN / DIN 338 RN Usage: General - hand, stand, column drills Alloy and non-alloy steel, steel casting with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.

    from 0,39 € with VAT
  • Grinded drill bit for metal HSS DIN338, 338RNHSS

    Grinded drill bit for metal HSS DIN338, 338RNHSS

    Right-handed ground twist drill for steel with reinforced core and cylindrical shank Drill length: Classic short series - lengths see attached photo Edge angle: 118 ° Helix angle: 25-30 ° Material: HSS - High speed steel Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Non-alloy and alloy steel, cast steel with strength up to 900 N / mm2 Gray malleable cast irons, ductile cast irons, sintered aluminum alloys, bronze

    from 0,67 € with VAT
  • Grinded drill bit for metal HSS TiN DIN 338, 338RNHSS TiN

    Grinded drill bit for metal HSS TiN DIN 338, 338RNHSS TiN

    Coated right-cut ground twist drill for steel with reinforced core and cylindrical shank Drill length: Classic short series - see attached photo for lengths Blade angle: 118° Helix angle: 25-30° Material: HSS - High-speed steel Coating: TiN - Titanium Nitride Standard: DIN338 (replaces PN 2907 / PN2907) Usage : General - hand, stand, column drills Unalloyed and alloyed steel, cast steel with a strength of up to 900 N/mm2 Gray malleable cast irons, sintered ductile irons, short chip aluminum alloys, bronze

    from 2,08 € with VAT
  • Cobalt drill for metal HSSE Co5 DIN338, 338RTIHSSCo5

    Cobalt drill for metal HSSE Co5 DIN338, 338RTIHSSCo5

    Right-handed ground spiral cobalt drill for stainless steel with reinforced core and cylindrical shank Drill length: Short series - lengths see attached photo Edge angle: 130 ° Helix angle: 36 ° Material: HSSE - High speed steel + Co5 Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Drills have increased heat resistance with a special groove profile.

    Price - On request
  • Hand tap M - TS ČSN223010 , sale

    Hand tap M - TS ČSN223010 , sale
    Clearance sale

    Metric hand tap Material: tool steel Standard: ČSN 22 3010 / CSN 223010 The taps come from excess stock, made in 19xx, unused

    from 0,48 € with VAT
  • Carbide grooving mill 2fl. 30° TiAlN , CERANIT

    Carbide grooving mill 2fl. 30° TiAlN , CERANIT
    Recommended ✓

    Carbide (TK) milling cutter for grooving Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Progressive groove milling, hole drilling Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

    from 9,17 € with VAT
  • Carbide grooving mill 2fl. 30° , CERANIT

    Carbide grooving mill 2fl. 30° , CERANIT

    Carbide (TK) slot milling cutter - uncoated Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: uncoated Usage: Progressive groove milling, hole drilling Suitable for milling steel and mild adhesive steels (aluminum, copper, brass, etc.) Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

    from 8,70 € with VAT
  • Nut for T-slot, ČSN 021529 / DIN 508

    Nut for T-slot, ČSN 021529 / DIN 508

    T-slot nut Dimension of the T-slot: according to the selected variant (dimension "A" - see attached photo) Thread size: according to the selected variant Dimensions of the nut: - see product description for individual variants Standard: ČSN 02 1529 / CSN021529 or DIN508 Material: Structural steel 12050 (C45), heat treated - unless otherwise specified for a specific dimension

    from 1,89 € with VAT
  • Carbide corner cutter 3fl. 30 ° TiAlN, CERANIT

    Carbide corner cutter 3fl. 30 ° TiAlN, CERANIT

    Carbide (TK) milling cutter for universal milling - corner Number of edges: 3bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

    from 10,49 € with VAT
  • Carbide corner cutter long 3fl. 30 ° TiAlN, CERANIT

    Carbide corner cutter long 3fl. 30 ° TiAlN, CERANIT

    Carbide (TK) milling cutter for universal milling - long corner Number of edges: 3bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

    from 12,46 € with VAT
  • Carbide universal milling cutter 4fl. 45 ° TiAlN 65HRC , CERANIT

    Carbide universal milling cutter 4fl. 45 ° TiAlN 65HRC , CERANIT
    Recommended ✓

    Carbide (TK) milling cutter for universal milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

    from 11,14 € with VAT
  • Carbide universal milling cutter 4fl. 30 ° TiAlN 45HRC, CERANIT

    Carbide universal milling cutter 4fl. 30 ° TiAlN 45HRC, CERANIT

    Carbide (TK) milling cutter for universal long milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping, high reliability on CNC machines Cutting conditions - see attached photo

    from 18,15 € with VAT