Česká výroba

Carbide drill TK / HA / PVD Diameter: according to the selected variant Helix length: according to the selected variant Total length: according to the selected variant Length: 3D d1 = d2 Helix angle: 30 - 35° Tip angle: 118° Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 / DIN1897 Usage : Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, cast iron, plastics * up to 45 HRC It is a carbide drill that was manufactured based on the standard of classic HSS drills. I.e. these drills have the same length, helix angle and tip as classic HSS drills. We are able to supply these drill bits uncoated or with another coating (TiN)

Carbide drill TK / HA / PVD Diameter: according to the selected variant Helix length: according to the selected variant Total length: according to the selected variant Length: 8D d1 = d2 Helix angle: 30 - 35° Tip angle: 118° Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 / DIN1897 Usage : Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, cast iron, plastics * up to 45 HRC It is a carbide drill that was manufactured based on the standard of classic HSS drills. I.e. these drills have the same length, helix angle and tip as classic HSS drills. We are able to supply these drill bits uncoated or with another coating (TiN)

Carbide drill TK / HA / PVD Average: according to the selected variant Length: 3D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide drill TK / HA / PVD Average: according to the selected variant Length: 3D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine grain K40UF Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide (TK) milling cutter for universal milling - long corner Number of edges: 3bř. Diameter of the working part: according to the selected diameter, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for universal milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Clamping screw for T slot Thread: according to the selected variant Length L (without square): depending on the selected variant Other dimensions - see product description for individual variants Standard: ČSN 02 1124 Screw strength 10.9, blackened (unless otherwise stated)

Carbide drill TK / HA / PVD Average: according to the selected variant Length: 5D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide drill TK / HA / PVD Diameter: according to the selected variant Length: 5D Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide drill TK / HA / PVD Average: according to the selected variant Length: 5D Helix angle: 30 - 35 ° Tip angle: 130 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: production standard Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide (TK) milling cutter suitable for finishing and roughing Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 39/41 ° - variable helix Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Thanks to the variable helix, the cutter has excellent anti-vibration properties for side milling, where it is possible to use the entire length of the helix. The cutter runs smoothly. The cutter has 2 cutting edges across the center, a reinforced core. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter suitable for finishing and roughing Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 39/41 ° - variable helix Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Thanks to the variable helix, the cutter has excellent anti-vibration properties for side milling, where it is possible to use the entire length of the helix. The cutter runs smoothly. The cutter has 2 cutting edges across the center, a reinforced core. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo