Brusné papíry, plátna a rouna

Sanding sheet - paper Dimensions: 230x280mm Grain: according to the selected variant Abrasive grain: artificial corundum Binder: glue Series 145 Color: green Composition: paper, aluminum oxide Usage: for ordinary manual sanding of wood and metal

KLINGSPOR brand sanding emery board Diameter: according to the selected variant Grain: according to the selected variant Usage: For angle grinder Fastening method: velcro

KLINGSPOR brand sanding emery board Diameter: according to the selected variant Grain: according to the selected variant Usage: For an angle / vibrating sander with suction Fastening method: velcro

Deer brand SA331 125 mm velcro sanding emery board Grain: according to the selected variant Fastening method: velcro Extra fine cut, suitable for fine sanding also when wet, also suitable for sanding/polishing plastic, silicone, etc.

Abrasive cloth cut - set of 10 pieces Diameter: 75mm Grain: according to the selected variant

Fiber disc for grinding stainless steels, classic steels and metal, 6 cross-sections around the center Diameter: according to the selected variant Grain: according to the selected variant Clamping method: on the base plate Type: CS 565 Type of grain: zircon corundum Binder: synthetic resin Self-sharpening effect - high aggressiveness, suitable for rough grinding Specially developed for grinding stainless and classic steels Excellent ratio - price / performance

Volcano fiber disc for grinding stainless steel, aluminum and non-ferrous metals, 6 cross-sections around the center Diameter: according to the selected variant Grain: according to the selected variant Clamping method: on the base plate Type: CS 570 Type of grain: zircon corundum Binder: synthetic resin Type of binder: thick Self-sharpening effect - high aggressiveness Specially developed for grinding stainless steels and are also particularly suitable for machining aluminium.

Sanding sheet - paper B Dimensions: 230x280mm Grain: according to the selected variant Abrasive grain: silicon carbide, SiC abrasive grain Binder: resin Series 522 Colour: black-green Usage: for sanding under water, recommended use for sanding varnishes, paints, bodywork, steel, cast iron, wood and plastics

Sanding cloth in a sheet Dimensions: 230x280mm Grain: according to the selected variant Series 637 Color: black/red Composition: canvas, artificial corundum, binding glue Usage: manual and machine grinding of metals and wood

Abrasive non-woven abrasive wheel 125mm with Velcro Suitable for matting and satinizing ferrous and non-ferrous metals, oxidized cleaning non-ferrous metals, matting of stainless steels, roughening of plastics, as a preparation for gluing, removing blue discoloration after welding. Diameter: 125mm Grain size: coarse - this wheel is suitable for use after grinding abrasives of grain size P60 - P120 Corundum: A Optimum working speed ky: 3,000 rpm Maximum working speed: 5,500 rpm Open material structure gives the tool elasticity and takes care of the cold cut. The high flexibility of the fleece ensures that there are no changes in the geometry of the surface. Usage: Drill or angle grinder, ideally with speed control For comparison of roughness of fleece - see attached photos.

Abrasive non-woven abrasive wheel 125mm with Velcro Suitable for matting and satinizing ferrous and non-ferrous metals, oxidized cleaning non-ferrous metals, matting of stainless steels, roughening of plastics, as preparation for gluing, removal of blue discoloration after welding. Diameter: 125mm Grain size: fine - this wheel is suitable for use after grinding abrasive grit P180 - P320 Corundum: A Optimal working speed ky: 3,000 rpm Maximum working speed: 5,500 rpm The open structure of the material imparts elasticity to the tools and takes care of the cold cut. The high flexibility of the fleece ensures that there are no changes in the geometry of the surface. Usage: Drill or angle grinder, ideally with speed control For comparison of roughness of fleece - see attached photos.

Abrasive non-woven abrasive wheel 125mm with Velcro Suitable for matting and satinizing ferrous and non-ferrous metals, oxidized cleaning non-ferrous metals, matting of stainless steels, roughening of plastics, as preparation for gluing, removal of blue discoloration after welding. Diameter: 125mm Grain size: medium - this wheel is suitable for use after grinding abrasives with a grain size of P120 - P180 Corundum: A Optimal working speed Height: 3,000 rpm Maximum working speed: 5,500 rpm The open structure of the material gives the tool elasticity and takes care of the cold cut. The high flexibility of the fleece ensures that there are no changes in the geometry of the surface. Usage: Drill or angle grinder, ideally with speed control For comparison of roughness of fleece - see attached photos.