Brushes, files and rasps
-
Workshop file 100mm flat 12x3, 100/1 - SEK 1, BAHCO
Flat file 100/1, 12x3,0 mm Length: 100 mm Width: 12mm Thickness: 3mm Sec: 1 - tj. semi-rough - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-04-1-2
In stock9,28 € with VAT -
Workshop file 100mm flat 12x3, 100/2 - SEK 2, BAHCO
Flat file 100/2, 12x3.0 mm Length: 100 mm Width: 12mm Thickness: 3mm Sec: 2 - i.e. medium roughness - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The thickness of files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for filing highly alloyed tool steels and for sharpening heavy tools. Order no. number: 1-100-04-2-2
In stock8,47 € with VAT -
Workshop file 150mm flat 16x4, 150/1 - SEK 1, BAHCO
Flat file 150/1, 16x4,0 mm Length: 150 mm Width: 16mm Thickness: 4mm Sec: 1 - tj. semi-rough - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-06-1-2
In stock8,17 € with VAT -
Workshop file 150mm flat 16x4, 150/2 - SEK 2, BAHCO
Flat file 150/2, 16x4,0 mm Length: 150 mm Width: 16mm Thickness: 4mm Sec: 2 - ie. medium roughness - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-06-2-2
In stock11,06 € with VAT -
Workshop file 150mm flat 16x4, 150/3 - SEK 3, BAHCO
Flat file 150/3, 16x4,0 mm Length: 150 mm Width: 16mm Thickness: 4mm Sec: 3 - ie. fine - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-06-3-2
In stock10,88 € with VAT -
Workshop file 200mm flat 20x5, 200/1 - SEK 1, BAHCO
Flat file 200/1, 20x5,0 mm Length: 200 mm Width: 20mm Thickness: 5mm Sec: 1 - ie. semi-rough - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-08-1-2
In stock12,37 € with VAT -
Workshop file 200mm flat 20x5, 200/2 - SEK 2, BAHCO
Flat file 200/2, 20x5,0 mm Length: 200 mm Width: 20mm Thickness: 5mm Sec: 2 - ie. medium roughness - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-08-2-2
In stock12,33 € with VAT -
Workshop file 200mm flat 20x5, 200/3 - SEK 3, BAHCO
Flat file 200/3, 20x5,0 mm Length: 200 mm Width: 20mm Thickness: 5mm Sec: 3 - ie. fine - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-08-3-2
In stock12,33 € with VAT -
Workshop file 250mm flat 25x5,5, 250/1 - SEK 1, BAHCO
Flat file 250/1, 25x5,5 mm Length: 250 mm Width: 25mm Thickness: 5,5mm Sec: 1 - ie semi-coarse - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-10-1-2
In stock14,41 € with VAT -
Workshop file 250mm flat 25x5,5, 250/2 - SEK 2, BAHCO
Flat file 250/2, 25x5,5 mm Length: 250 mm Width: 25mm Thickness: 5,5mm Sec: 2 - ie medium roughness - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-10-2-2
In stock14,67 € with VAT
